4.500 rtrv-gttsel
Use this command to display a list of administered global title selector combinations required for a global title entry. The list can be filtered by using various parameter combinations.
Note:
If the EGTT feature is turned on, then the GTT Selector (ent/chg/dlt/rtrvgttsel), GTT Set
(ent/dlt/rtrv-gttset), and GTA
(ent/chg/dlt/rtrvgta) commands replace the Translation Type
(ent/dlt/rtrv-tt) and Global Title Translation
(ent/chg/dlt/rtrv-gtt) commands. It is not recommended to
run
ent/dlt/rtrv-tt & ent/chg/dlt/rtrv-gtt commands
as it may cause the advance GTA fields of GTT entry to be reset to the default
values.
Parameters
Note:
The nature of address indicator parameters (naiv or nai) can be specified using a mnemonic or an explicit value. Either value can be specified: however, both values cannot be specified at the same time for the same parameter. Table 58: NAIV/NAI Mapping shows the mapping between the naiv and the nai parameter values.Note:
The numbering plan parameters (npv or np) can be specified using a mnemonic or an explicit value. Either value can be specified: however, both values cannot be specified at the same time for the same parameter. Table 59: NPV/NP Mapping shows the mapping between the npv and np parameter values.- eaglegen (optional)
- This parameter specifies whether the selector is used by EAGLE generated messages.
- gti/gtia/gtii/gtin/gtin24/gtiis/gtins/gtin16 (optional)
- Global title indicator.
For all EGTT selector commands, the domain is defined as GTI and GTIA (ANSI), GTII (ITU international), GTIN (ITU national), GTIN24 (24-bit ITU national), GTIIS (ITU international spare), and GTINS (ITU national spare) and GTIN16 (16-bit ITU National).
For the selector commands, GTI and GTIA are equivalent. GTT selectors can be provisioned for the same translation type (TT) with different ITU domains. For example, if an entry with gtii=2 and tt=4 already exists, an entry with gtin=2 and tt=4 can be specified.
- gttsn (optional)
- GTT set name. A GTT set is an entity to which global title addresses and selectors are assigned.
- msgtype (optional)
- SCCP message type.
Allow one or more SCCP message types (UDT/UDTS/XUDT/XUDTS) for every GTT Selector entry. This will help in screening different message types differently.
Example
rtrv-gttsel
rtrv-gttsel:gtii=2
rtrv-gttsel:tt=0:np=e164
rtrv-gttsel:gti=2:tt=10
rtrv-gttsel:gttsn=setint000
rtrv-gttsel:gtia=2:tt=21:cggttsn=setcgpc:cdgttsn=setcdgta:cgssn=20:selid=1: lsn=ls10
rtrv-gttsel:gtia=2:tt=2:lsn=ls1010
rtrv-gttsel:gtia=2:eaglegen=yes
rtrv-gttsel:cdgttsn=setdpc
rtrv-gttsel:ovrlapd=yes
rtrv-gttsel:gtin16=2
rtrv-gttsel:msgtype=u
rtrv-gttsel:msgtype=u,us
Dependencies
The EGTT feature must be turned on before this command can be entered.
Only entries that exactly match all specified parameters will be displayed. If no match is found, the following message is displayed in the Scroll Area of the terminal: "No GTT Selectors matching the specified criteria were found."
The np and npv parameters cannot be specified together in the same command.
The nai and naiv parameters cannot be specified together in the same command.
The gti/gtia=4, gti(x)=1, and gti(x)=3 parameters cannot be specified.
If the gti/gtia/gtii/gtin/gtin24/gtiis/gtins/gtin16=2 parameter is specified, then the np/npv and nai/naiv parameters cannot be specified.
If a full GTT selector key is specified by the gti(x), tt, np/npv, nai/naiv, cgssn, selid, and lsn parameters, then the GTT set specified by the cgpcsn, cggtasn, or cggttsn parameters cannot be specified.
The OBSR feature must be enabled before the cggtasn, cgpcsn, cgssn, or cdgtasn parameters can be specified.
The GTT set specified by the cggtasn or cgpcsn parameter must exist in the database before it is assigned to a GTT selector.
The set type of the cggtasn or cgpcsn parameter must match the set type of the corresponding entry in the GTT set table. For example, the cggtasn parameter should be have a set type of cggta, and the cgpcsn parameter should have a set type of cgpc.
The SSNSELID table must be accessible.
The FLOBR feature must be turned on before the lsn, eaglegen, cdgttsn, or cggttsn parameter can be specified.
If the eaglegen=yes parameter is specified, then the msgtype, lsn, selid, gttsn, cdgtasn, cgssn, cggttsn, cggtasn, and cgpcsn parameters cannot be specified.
The value specified for the cdgtasn or gttsn parameter must match the name of an existing GTT set.
The GTT set specified by the
cdgtasn or
gttsn parameter must have a set type
of
cdgta (see the
ent-gttset
command).
If the OBSR feature is enabled or the FLOBR feature is turned on, then the gttsn parameter cannot be specified.
The GTT Set table is corrupt or cannot be found.
The GTT Selector table is corrupt or cannot be found.
The GTTDBMM table is corrupt or cannot be found.
The linkset specified by the lsn parameter must already exist in the Linkset table.
The CdPA GTT Set specified by the gttsn, cdgtasn, or cdgttsn parameter must already exist in the GTT Set table.
A value of dflt must be specified for the np and nai parameters, or neither value can be dflt.
The Linkset table is corrupt or cannot be found.
If a full GTT selector key is specified by the gti(x), tt, np/npv, nai/naiv, selid, and lsn parameters, then the GTT set specified by the gttsn, cdgtasn, or cdgttsn parameters cannot be specified.
If the lsn parameter is specified, then the cdgttsn or cggttsn parameter must be specified.
The cggtasn, cgpcsn, and cggttsn parameters cannot be specified together in the command.
The gttsn, cdgtasn, and cdgttsn parameters cannot be specified together in the command.
If the gttsn, cdgttsn, or cdgtasn parameter is specified, then the cgssn parameter cannot be specified.
If the eaglegen=yes parameter is specified, then the lsn, selid, gttsn, cdgtasn, cgssn, cggttsn, cggtasn, or cgpcsn parameters cannot be specified.
If the FLOBR feature is turned on, then the cdgtasn, cggtasn, and cgpcsn parameters cannot be specified.
If a value of dflt is specified for the np and nai parameters, then the cggtasn, cgpcsn, cgssn, selid, lsn, cggttsn, and eaglegen parameters cannot be specified.
A value of none cannot be specified for the gttsn, cdgtasn, cdgttsn, cggttsn, cggtasn, and cgpcsn parameters.
If the gti(x)=0 parameter is specified, then the eaglegen, tt, np/npv, and nai/naiv parameters cannot be specified.
Notes
There is no J7 FAK dependency on the GTIA/GTIN16/GTIN24 parameters. The command can be entered successfully whether the J7 FAK is enabled or not enabled.
GTT Selector entries configured using GTIN24/GTIN16 parameters shall be treated as ITU-N24 entries if the J7 FAK is disabled and shall be treated as ITU-N16 entries if the J7 FAK is enabled.
Also, if the J7 Support feature is enabled, the rtrv-gttsel output displays the GTIN16 header and if the J7 feature is not enabled, the rtrv-gttsel output displays the GTIN24 header.
When
msgtype is specified in the
rtrv-gttsel command, the best match for the
specified
msgtype is shown in the output. For example, say
there are two GTT Selector entries provisioned with
msgtype=u,us and
msgtype=us for different GTI(x), TT, NP and NAI
combination. The command
rtrv-gttsel:msgtype=us will display both selectors
in the output.
Output
This example retrieves all GTT selectors when EGTT is ON:
rtrv-gttsel
tekelecstp 10-04-15 13:54:13 EST EAGLE 42.0.0
GTIA TT NP NAI SELID GTTSN
2 2 -- --- none setans002
2 5 -- --- none setans005
GTII TT NP NAI SELID GTTSN
2 4 -- --- none setint004
4 4 dflt dflt none setint004
GTIN TT NP NAI SELID GTTSN
2 6 -- --- none setnat006
4 6 dflt dflt none setnat006
GTIN24 TT NP NAI SELID GTTSN
GTIIS TT NP NAI SELID GTTSN
2 10 -- --- none setins010
4 10 dflt dflt none setins010
GTINS TT NP NAI SELID GTTSN
;
This example retrieves all GTT Selectors when the OBSR feature is enabled or the FLOBR feature is turned on:
rtrv-gttsel
sccprte 10-04-15 14:31:52 EST EAGLE 42.0.0
GTI CG CDPA CGPA
ANSI TT NP NAI SSN SELID LSN GTTSET GTTSET
2 5 -- --- any none lsa03 opc1 (opc ) cgssn2 (cgssn)
2 5 -- --- 202 1234 any ----- (--- ) cggta1 (cggta
2 5 -- --- any none any cdgta1 (cdgta) cggta1 (cggta)
2 15 -- --- --- none Eagle-Gen cdgta2 (cdgta) ----- (--- )
2 15 -- --- 202 1234 lsa02 ----- (--- ) cgssn1 (cgssn)
2 101 -- --- --- none any setans101(cdgta) ----- (--- )
2 102 -- --- --- none any a102 (cdgta) ----- (--- )
2 202 -- --- --- none any a102 (cdgta) ----- (--- )
GTI CG CDPA CGPA
INTL TT NP NAI SSN SELID LSN GTTSET GTTSET
2 17 -- --- --- none Eagle-Gen icdgta1 (cdgta) ----- (--- )
2 101 -- --- --- none any setint101(cdgta) ----- (--- )
2 102 -- --- --- none any int102 (cdgta) ----- (--- )
2 222 -- --- --- none any int102 (cdgta) ----- (--- )
4 101 dflt dflt --- none any setint101(cdgta) ----- (--- )
4 102 dflt dflt --- none any int102 (cdgta) ----- (--- )
4 222 dflt dflt --- none any int102 (cdgta) ----- (--- )
4 253 11 126 102 5678 any ----- (--- ) icgpc2 (cgpc )
4 253 11 15 any 5678 lsint02 icgssn2 (cgssn) iopc2 (opc )
GTI CG CDPA CGPA
NATL TT NP NAI SSN SELID LSN GTTSET GTTSET
2 103 -- --- --- none any setnat103(cdgta) ----- (--- )
2 104 -- --- --- none any n104 (cdgta) ----- (--- )
2 204 -- --- --- none any n104 (cdgta) ----- (--- )
4 18 f69 5 --- none Eagle-Gen icdgta1 (cdgta) ----- (--- )
4 103 dflt dflt --- none any setnat103(cdgta) ----- (--- )
4 104 dflt dflt --- none any n104 (cdgta) ----- (--- )
4 204 dflt dflt --- none any n104 (cdgta) ----- (--- )
GTI CG CDPA CGPA
N24 TT NP NAI SSN SELID LSN GTTSET GTTSET
2 2 -- --- --- none any n24 (cdgta) ----- (--- )
2 124 -- --- --- none any n24 (cdgta) ----- (--- )
2 224 -- --- --- none any set24n224(cdgta) ----- (--- )
4 2 dflt dflt --- none any n24 (cdgta) ----- (--- )
4 19 f69 5 --- none Eagle-Gen icdgta1 (cdgta) ----- (--- )
4 124 dflt dflt --- none any n24 (cdgta) ----- (--- )
4 224 dflt dflt --- none any set24n224(cdgta) ----- (--- )
GTI CG CDPA CGPA
INTS TT NP NAI SSN SELID LSN GTTSET GTTSET
2 5 -- --- --- none any setins005(cdgta) ----- (--- )
2 7 -- --- --- none any ituis7 (cdgta) ----- (--- )
4 5 dflt dflt --- none any setins005(cdgta) ----- (--- )
4 7 dflt dflt --- none any ituis7 (cdgta) ----- (--- )
GTI CG CDPA CGPA
NATS TT NP NAI SSN SELID LSN GTTSET GTTSET
2 5 -- --- --- none any setnas005(cdgta) ----- (--- )
2 7 -- --- --- none any ituns7 (cdgta) ----- (--- )
4 5 dflt dflt --- none any setnas005(cdgta) ----- (--- )
4 7 dflt dflt --- none any ituns7 (cdgta) ----- (--- )
;
The following example illustrates rtrv-gttsel output after introduction of MSGTYPE as a GTT Selector key:
rtrv-gttsel
tekelecstp 17-04-15 14:31:52 EST EAGLE 46.6.0
GTI CG CDPA CGPA
MSGTYPE ANSI TT NP NAI SSN SELID LSN GTTSET GTTSET
xs 2 17 -- --- --- none any acdgta1 ----
(cdgta) (--- )
GTI CG CDPA CGPA
MSGTYPE INTL TT NP NAI SSN SELID LSN GTTSET GTTSET
u,us 2 17 -- --- --- none any icdgta1 ----
(cdgta) (--- )
xs 2 17 -- --- --- none any setint101 ----
(cdgta) (--- )
us,x 2 21 -- --- --- 15 any setint104 ----
(cdgta) (--- )
u,us,x 2 23 -- --- --- 15 any setint109 ----
(cdgta) (--- )
us 2 102 -- --- --- none any setint102 ----
(cdgta) (--- )
all 2 103 -- --- --- 15 any setint103 ----
(cdgta) (--- )
GTI CG CDPA CGPA
MSGTYPE NATL TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA
MSGTYPE N24 TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA
MSGTYPE INTS TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA
MSGTYPE NATS TT NP NAI SSN SELID LSN GTTSET GTTSET
The following example illustrates
rtrv-gttsel output when a single
msgtype value is mentioned in the
msgtype parameter.
rtrv-gttsel:msgtype=us
tekelecstp 17-04-15 14:31:53 EST EAGLE 46.6.0
GTI CG CDPA CGPA
MSGTYPE ANSI TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA
MSGTYPE INTL TT NP NAI SSN SELID LSN GTTSET GTTSET
u,us 2 17 -- --- --- none any icdgta1 ----
(cdgta) (--- )
us,x 2 21 -- --- --- 15 any setint104 ----
(cdgta) (--- )
u,us,x 2 23 -- --- --- 15 any setint109 ----
(cdgta) (--- )
us 2 102 -- --- --- none any setint102 ----
(cdgta) (--- )
all 2 103 -- --- --- 15 any setint103 ----
(cdgta) (--- )
GTI CG CDPA CGPA
MSGTYPE NATL TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA
MSGTYPE N24 TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA
MSGTYPE INTS TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA
MSGTYPE NATS TT NP NAI SSN SELID LSN GTTSET GTTSET
The following example illustrates
rtrv-gttsel output when a
msgtype=all is provided in command.
rtrv-gttsel:msgtype=all
tekelecstp 17-04-15 14:31:53 EST EAGLE 46.6.0
GTI CG CDPA CGPA
MSGTYPE ANSI TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA
MSGTYPE INTL TT NP NAI SSN SELID LSN GTTSET GTTSET
all 2 103 -- --- --- 15 any setint103 ----
(cdgta) (--- )
GTI CG CDPA CGPA
MSGTYPE NATL TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA
MSGTYPE N24 TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA
MSGTYPE INTS TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA
MSGTYPE NATS TT NP NAI SSN SELID LSN GTTSET GTTSET
The following example illustrates
rtrv-gttsel output when two
msgtype values are mentioned in the
msgtype parameter:
rtrv-gttsel:msgtype=u,x
tekelecstp 17-04-15 14:31:52 EST EAGLE 46.6.0
GTI CG CDPA CGPA
MSGTYPE ANSI TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA
MSGTYPE INTL TT NP NAI SSN SELID LSN GTTSET GTTSET
u,us 2 17 -- --- --- none any icdgta1 ----
(cdgta) (--- )
us,x 2 21 -- --- --- 15 any setint104 ----
(cdgta) (--- )
u,us,x 2 23 -- --- --- 15 any setint109 ----
(cdgta) (--- )
all 2 103 -- --- --- 15 any setint103 ----
(cdgta) (--- )
GTI CG CDPA CGPA
MSGTYPE NATL TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA
MSGTYPE N24 TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA
MSGTYPE INTS TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA
MSGTYPE NATS TT NP NAI SSN SELID LSN GTTSET GTTSET
The below example illustrates
rtrv-gttsel output when three
msgtype values are mentioned in the
msgtype parameter. No more than three msgtype
values can be mentioned in
msgtype parameter.
rtrv-gttsel:msgtype=u,x,xs
tekelecstp 17-04-15 14:31:52 EST EAGLE 46.6.0
GTI CG CDPA CGPA
MSGTYPE ANSI TT NP NAI SSN SELID LSN GTTSET GTTSET
xs 2 17 -- --- --- none any acdgta1 ----
(cdgta) (--- )
GTI CG CDPA CGPA
MSGTYPE INTL TT NP NAI SSN SELID LSN GTTSET GTTSET
u,us 2 17 -- --- --- none any icdgta1 ----
(cdgta) (--- )
xs 2 17 -- --- --- none any setint101 ----
(cdgta) (--- )
us,x 2 21 -- --- --- 15 any setint104 ----
(cdgta) (--- )
u,us,x 2 23 -- --- --- 15 any setint109 ----
(cdgta) (--- )
all 2 103 -- --- --- 15 any setint103 ----
(cdgta) (--- )
GTI CG CDPA CGPA
MSGTYPE NATL TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA
MSGTYPE N24 TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA
MSGTYPE INTS TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA
MSGTYPE NATS TT NP NAI SSN SELID LSN GTTSET GTTSET
The below example illustrates
rtrv-gttsel output when the
msgtype parameter is mentioned with the
tt parameter. No more than three msgtype values
can be mentioned in the
msgtype parameter
rtrv-gttsel:msgtype=xs:tt=17
tekelecstp 17-04-15 14:31:52 EST EAGLE 46.6.0
GTI CG CDPA CGPA
MSGTYPE ANSI TT NP NAI SSN SELID LSN GTTSET GTTSET
xs 2 17 -- --- --- none any acdgta1 ----
(cdgta) (--- )
GTI CG CDPA CGPA
MSGTYPE INTL TT NP NAI SSN SELID LSN GTTSET GTTSET
xs 2 17 -- --- --- none any setint101 ----
(cdgta) (--- )
GTI CG CDPA CGPA
MSGTYPE NATL TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA
MSGTYPE N24 TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA
MSGTYPE INTS TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA
MSGTYPE NATS TT NP NAI SSN SELID LSN GTTSET GTTSET
Legend
- GTI/GTIA/GTII/GTIN/GTIN24/GTIN16—Global title indicator
- TT—Translation type
- NP—Number plan
- NAI—Nature of address indicator
- GTTSN—GTT set name. A GTT set is an entity to which global title addresses and selectors are assigned.
- MSGTYPE—SCCP message type
Related Topics