4.501 rtrv-gttset
Use this command to display a list of administered GTT sets. This list can be filtered by using the parameters shown.
Note:
If the EGTT feature is turned on, then the GTT Selector (ent/chg/dlt/rtrvgttsel), GTT Set
(ent/dlt/rtrv-gttset), and GTA
(ent/chg/dlt/rtrvgta) commands replace the Translation Type
(ent/dlt/rtrv-tt) and Global Title Translation
(ent/chg/dlt/rtrv-gtt) commands. It is not recommended to
run
ent/dlt/rtrv-tt & ent/chg/dlt/rtrv-gtt commands
as it may cause the advance GTA fields of GTT entry to be reset to the default
values.
Parameters
- gttsn (optional)
- GTT set name. A GTT set is an entity to which global title addresses and selectors are assigned.
- netdom (optional)
- Network domain. This command does not distinguish between ITU National or ITU International because the Enhanced Global Title Translation feature does not discriminate between the ITU-I and ITU-N translations.
- npsn (optional)
- GTT set name (Not Present Set Name). This parameter can have the IMEI/IMSI/MSISDN/VLRNB/SMRPOA/SMRPDA GTT set types.
- refcnt (optional)
- GTT set reference count. The count of GTT set being referred in GTT Selectors, GTA Translations, BPARTYGTTSN and IS41SMSCGTTSN options in GSMSMSOPTS table and BPARTYGTTSN option in IS41SMSOPTS table.
- setidx (optional)
- GTT set index.
Note:
A comma-separated setidx list that allow GTT set information to be retrieved based on the GTT index number. Up to 7 setidx can be specified in the list.
Example
rtrv-gttset
rtrv-gttset:netdom=ansi
rtrv-gttset:gttsn=t800
rtrv-gttset:netdom=ansi:settype=cdssn
rtrv-gttset:settype=opcode
rtrv-gttset:setidx=1
rtrv-gttset:actsn=actdisc1
rtrv-gttset:refcnt=yes
rtrv-gttset:gtmodid=set1
rtrv-gttset:npsn=imsi1
rtrv-gttset:setidx=3,7,65,22
rtrv-gttset:sxudt=yes
Dependencies
The EGTT feature must be turned on before this command can be entered.
If the gttsn parameter is specified, it cannot have a value of none, and must match an existing gttsn.
If the netdom parameter is specified, at least one entry must exist that exactly matches the specified value. Otherwise, the following error message appears in the scroll area:
No GTT Sets matching the specified criteria were found.The netdom=cross parameter is valid if the settype=cdgta/imei/imsi/msisdn/vlrnb/smrpoa/smrpda parameter is specified.
If the gttsn parameter is specified then the settype, netdom, actsn, and gtmodid parameters cannot be specified.
The Origin-based SCCP Routing feature must be enabled if the value of the settype parameter is cggta, cgssn, opc, or cgpc.
The ANSI/ITU SCCP Conversion feature must be enabled before the netdom=cross parameter can be specified.
The TOBR feature must be turned on before the opcode=settype parameter can be specified.
If the setidx parameter is specified, then no other parameter can be specified in the command.
The FLOBR feature must be turned on before a value of cdssn or dpc can be specified for the settype parameter.
The value specified for the gtmodid parameter must already exist in the GTMOD table.
The value specified for the npsn parameter must match the name of an existing GTT Set of IMEI/IMSI/MSISDN/VLRNB/SMRPOA/SMRPDA type.
The SXUDT parameter must be specified with the OPCODE GTT set type only.
Duplicate values cannot be specified for the SETIDX parameter.
Notes
When the Origin-based SCCP Routing feature is turned on, the settype parameter is displayed regardless of feature key status. If the feature key is not enabled, the settype=cdgta parameter (default value) is displayed.
Only entries that match the setidx values specified in the command will be displayed. If no GTTSet is found for a particular setidx, the following message is displayed in the Scroll Area of the terminal: "No Entry found." along with the setidx for which GTTSet was not found.
Output
This example retrieves all GTT sets:
rtrv-gttset
tekelecstp 10-05-04 12:57:51 EST EAGLE 42.0.0
GTTSN NETDOM NDGT
lidb ansi 10
t800 ansi 6
s_i000 itu 15
imsi itu 15
abcd1234 itu 12
setins005 itu 6
ituis7 itu 6
setnas005 itu 6
ituns7 itu 6
GTT-SET table is (5 of 2000) 1% full.
;
This example retrieves a specific GTT set:
rtrv-gttset:gttsn=t800
tekelecstp 09-08-14 13:46:14 EST EAGLE 41.1.0
GTTSN NETDOM NDGT
t800 ansi 6
GTT-SET table is (3 of 2000) 1% full.
;
This example retrieves all GTT sets when the VGTT feature is turned on:
rtrv-gttset
tekelecstp 09-08-14 13:46:56 EST EAGLE 41.1.0
GTTSN NETDOM NDGT
lidb ansi 3,7,10
t800 ansi 4,6
s_i000 itu 10,15
imsi itu 10,15
abcd1234 itu 12
GTT-SET table is (5 of 2000) 1% full.
;
This example retrieves GTT sets for a specified GTT set type when the Origin-based SCCP Routing feature is turned on:
rtrv-gttset:settype=cgpc
tekelecstp 09-08-14 12:59:19 EST EAGLE 41.1.0
GTTSN NETDOM SETTYPE NDGT
pc00 ansi CGPC -
pc01 ansi CGPC -
pc02 itu CGPC -
pc03 ansi CGPC -
pc04 ansi CGPC -
pc05 ansi CGPC -
GTT-SET table is (8 of 2000) 1% full.
;
This example retrieves all GTT sets when the Origin-based SCCP Routing feature is turned on.
rtrv-gttset
rlghncxa03w 09-08-14 08:10:20 EST EAGLE 41.1.0
GTTSN NETDOM SETTYPE NDGT
Pc10 cross CDGTA 6,8,10,17
Pc11 ansi CGGTA 10
Pc12 itu CGPC -
Pc13 itu CGSSN -
Pc14 ansi OPC -
Pc15 ansi CGPC -
GTT-SET table is (6 of 2000) 1% full.
;
Retrieve all GTT sets when the ANSI/ITU SCCP Conversion feature is enabled:
rtrv-gttset
rlghncxa03w 09-08-13 08:29:15 EST EAGLE 41.1.0
GTTSN NETDOM NDGT
lidb ansi 10
t800 ansi 6
s_i000 itu 15
imsi itu 15
abcd1234 cross 12
GTT-SET table is (5 of 2000) 1% full.
;
This example retrieves all GTT sets when the Support for 16 GTT Lengths in VGTT feature is turned on:
rtrv-gttset
rlghncxa03w 09-08-13 08:16:15 EST EAGLE 41.1.0
GTTSN NETDOM NDGT
lidb ansi 1,3,5,6,7,8,9,10,11,12,13,14,18,21
t800 ansi 4,6
s_i000 itu 10,15
GTT-SET table is (3 of 2000) 1% full.
;
This example retrieves all GTT sets when the TOBR feature is turned on:
rtrv-gttset
tekelecstp 16-10-10 13:54:11 MST EAGLE 46.5.0.0.0-70.5.0
GTTSN NETDOM SETTYPE NPSN CHECKMULCOMP NDGT
Pc10 cross CDGTA ----- ------------ 6,8,10,17
Pc11 ansi CGGTA ----- ------------ 10
Pc12 itu CGPC ----- ------------- -
Pc13 itu CGSSN ----- ------------- -
Pc14 ansi OPC ----- ------------- -
Pc15 ansi CGPC ----- ------------- -
Pc16 itu CDSSN ----- ------------- -
Pc17 - OPCODE ----- YES -
GTT-SET table is (8 of 2000) 1% full.
;
This example retrieves the GTT set entry on the basis of set index:
rtrv-gttset:setidx=1
tekelecstp 09-08-13 10:57:14 EST EAGLE 41.1.0
Command entered at terminal #4.
GTTSN NETDOM SETTYPE NDGT
setcggta ansi CGGTA 0
GTT-SET table is (3 of 2000) 1% full.
;
This example retrieves GTT sets for DPC set type when the FLOBR feature is turned on:
rtrv-gttset:settype=dpc
tekelecstp 10-03-14 08:10:20 EST EAGLE 42.0.0
GTTSN NETDOM SETTYPE NDGT
Setdpc ansi DPC -
Setdpc1 ansi DPC -
GTT-SET table is (8 of 2000) 1% full.
;
This example retrieves GTT set entries and the corresponding reference counts:
rtrv-gttset:refcnt=yes
tekelecstp 10-05-04 12:11:59 EST Eagle 42.0.0
GTTSN NETDOM REFCNT NDGT
lidb ansi 0 10
t800 ansi 2 6
s_i000 itu 1 15
imsi itu 1 15
abcd1234 itu 0 12
GTT-SET table is (5 of 2000) 1% full.
;
rtrv-gttset:gtmodid=set1
tekelecstp 10-01-10 12:13:21 EST EAGLE 42.0.0
GTTSN NETDOM NDGT
abc ansi 6
GTT-SET table is (1 of 2000) 1% full.
;
This example retrieves GTT set entries after the NPSN parameter is added:
rtrv-gttset:settype=msisdn
tekelecstp 15-05-24 08:10:20 EST EAGLE 46.3.0
GTTSN NETDOM SETTYPE NPSN NDGT
Imsi1 ansi MSISDN imsi2 10
Msisdn3 itu MSISDN imsi3 -
GTT-SET table is (10 of 2000) 1% full.
;
rtrv-gttset
tekelecstp 15-05-24 08:10:20 EST EAGLE 46.3.0
GTTSN NETDOM SETTYPE NPSN NDGT
Pc10 cross CDGTA -- 6,8,10,17 --
Pc11 ansi CGGTA -- 10
Imsi1 ansi MSISDN imsi2 10
Imsi2 itu IMSI msisdn3 -
Msisdn3 itu MSISDN imsi3 -
Imsi3 ansi IMSI - -
GTT-SET table is (6 of 2000) 1% full.
;
This example retrieves all GTT sets with new column SETIDX:
rtrv-gttset
tekelecstp 17-06-07 09:38:07 MST EAGLE 46.6
CHECKMUL GTTSET
GTTSN NETDOM SETTYPE NPSN COMP SETIDX MEASRQD SXUDT NDGT
op1 itu OPCODE ----- --- 0 no yes 8
cdset2 itu CDGTA ----- --- 1 yes - 6
cdset3 itu CDGTA ----- --- 2 no - 8
resdata itu OPCODE ----- off 3 trans no -
imsi1 itu IMSI ----- --- 4 yes - 6
vlrnb1 itu VLRNB imsi1 --- 5 no - 6
GTT-SET table is (6 of 10000) 1% full.;
This example retrieves the GTT set entry on the basis comma separated set index:
rtrv-gttset:setidx=3,44,2,90,106
tekelecstp 17-06-21 12:20:26 MST EAGLE 46.6
CHECKMUL GTTSET
GTTSN NETDOM SETTYPE NPSN COMP SETIDX MEASRQD SXUDT NDGT
resdata itu OPCODE ----- off 3 trans no -
No Entry found 44
cdset3 itu CDGTA ----- --- 2 no - 8
No Entry found 90
No Entry found 106
GTT-SET table is (6 of 10000) 1% full.
This example retrieves GTT set entries on the basis of sxudt:
rtrv-gttset:sxudt=yes
tekelecstp 17-07-15 15:22:26 MST EAGLE 46.6
CHECKMUL GTTSET
GTTSN NETDOM SETTYPE NPSN COMP SETIDX MEASRQD SXUDT NDGT
op1 itu OPCODE ----- off 3 no yes -
op2 itu OPCODE ----- --- 2 yes yes 8
GTT-SET table is (6 of 10000) 1% full.
Legend
- GTTSN—GTT set name
- NETDOM—Network domain
- SETTYPE—GTT set type
- REFCNT—Reference count
- NDGT—Number of digits required for GTAs associated with this set
- NPSN—Not present GTT set name
- CHECKMULCOMP—Decode multiple components of a TCAP Message
- GTTSETMEASRQD—Per GTTSET Measurement Required
- SETIDX—GTT set index
- SXUDT—Segmented XUDT
Related Topics