rtrv-ss-appl

Use this command to retrieve information for all provisioned subsystem applications from the database. The command displays the application type, subsystem number, and application status.

Parameters

This command has no parameters.

Example

rtrv-ss-appl

Dependencies

The ANSI41 AIQ, EIR, LNP, or V-Flex feature must be enabled, or the AINPQ or INP feature must be turned on before this command can be entered.

The SS-APPL table is corrupt or cannot be found.

The LNP feature must be turned on before the WNP or PLNP feature can be turned on and before LNP information or measurements can be reported on.

A severe system fault has occurred and the command was rejected.

The LNP TT SS-APPL table is corrupt or cannot be found.

Notes

None

Output

rtrv-ss-appl


    tekelecstp 09-12-03 14:42:38 EST  EAGLE 42.0.0 
    APPL   SSN  STAT
    AIQ    12   online            
    ATINPQ 10   online

    SS-APPL TABLE IS 33% FULL (2 OF 6) 
;

This example shows the output when the EPAP Data Split feature is turned on:

rtrv-ss-appl

    tekelecstp 12-01-12 15:08:04 EST  EAGLE 45.0.0

    APPL     SSN  STAT      RQDTBLNOP
    INP      11   offline   disc
    AIQ      12   online    udts

 SS-APPL table is (2 of 6) 33% full.

;

Legend

APPL—Application type
SSN—Subsystem number
STAT—Status:online or offline
RQDTBLNOP—Required table not present

4.586 rtrv-ss-appl