Configure SIP Monitoring

You must enable sip-monitoring and configure the options for displaying session data and notable event data on the Monitor and Trace page.

• Configure any filters that you want, if you don't want to monitor all SIP traffic. See "Filter Configuration."

The only required setting is State, which enables sip-monitoring. You can optionally monitor all filters and you can specify one or more filters to monitor. You can specify a time for short session duration monitoring and you can configure interesting events to monitor.

1. From the web GUI, click Configuration, Session-Router, SIP-Monitoring.
2. On the Modify sip-monitoring page, click Show advanced, and do the following.

   Match any filter	Select to monitor all SIP traffic. Default: Disabled.
   State	Select to enable SIP monitoring.
   Short session duration	Enter a value, in seconds, for the maximum session duration of a short session. Default: 0. Range 0-999999999.
   Monitoring filters	Create a global list of monitoring filters. Click Add, enter the name of the filter, and do one of the following: Click OK. Click Apply/Add another, add another NTP server, and click OK. Repeat, as needed.
   Interesting events	Create a global list of interesting events to monitor. Click Add, Show advanced, and do the following: Type. Select an event type from the drop-down list. Trigger threshold. Enter the number of events required to occur in within the trigger window before the system starts monitoring. Default: 0. Range: 0-999999999. Trigger timeout. Enter the amount of time, in seconds, that the monitoring persists. Default: 0. Range: 0-999999999, Click OK. The system displays the SIP monitoring page.

3. Click OK.
4. Save the configuration.

• View SIP Session Summary and SIP Notable Event Summary on the Monitor and Trace tab.