Securing the Basic Stand to a Counter

The Basic Stand is a mounting option for the Compact Workstation 310. When using this option, ensure that the stand is properly secured to a counter.

Note: If using a battery power option in conjunction with your workstation, you must first attach the battery enclosure to the stand before securing the stand to the counter.

1. Place the Basic Stand on the counter surface in the desired mounting position.
2. Using the stand screw holes as guides, mark the counter surface, and then use a drill to create the holes.
3. Secure the stand to the counter using mounting screws. The mounting screws are not provided. Ensure that you are using screws that meet the needs of the installation.
   1. The stand mounting hole diameter is ~5.9mm (0.232” = ~15/64”) and will accept up to a #12 or M5 screw.
   2. The screw length should be a minimum of one inch plus the thickness of the counter.
   3. Recommended metal surface hole diameter: 7/32" (5.5mm) drill bit size 7/32" (5.5mm). Recommended wood surface hole diameter: 15/64" (6mm) drill bit size 15/64" (6mm).