A Secondary Topologies for Oracle B2B

This appendix describes secondary (alternate) topologies for Oracle B2B.

Oracle SOA Suite, Oracle B2B, and Business Activity Monitoring Topology

Use this topology to implement Oracle Business Activity Monitoring (BAM) in your Oracle B2B domain.

The BAM software is targeted to its own cluster; this ensures that there is no resource contention between the Oracle B2B and BAM software.

Figure A-1 BAM and B2B Topology

Description of Figure A-1 follows
Description of "Figure A-1 BAM and B2B Topology"

Roadmap for Installing and Configuring the Oracle SOA Suite, B2B, and Business Activity Monitoring Topology

The following table describes the roadmap needed to configure this topology on your system.

Table A-1 Overview of the Installation and Configuration Steps for Oracle SOA Suite, B2B, and Business Activity Monitoring

Task Description More Information Special Instructions

Verify your system environment

Before beginning the installation, verify that the minimum system and network requirements are met.

See Roadmap for Verifying Your System Environment.

None.

Obtain the appropriate distribution

Oracle B2B requires an existing Oracle SOA Suite and Oracle Fusion Middleware Infrastructure installation. When you install Oracle SOA Suite, Business Activity Monitoring also gets automatically installed. You must install B2B in the same Oracle home as Oracle Fusion Middleware Infrastructure and Oracle SOA Suite.

See About Product Distributions.

You must obtain all distributions of Oracle Infrastructure, Oracle SOA Suite and Business Process Management, and Oracle B2B.

Determine your installation directories

Verify that the directories that will need to be created can be created or accessed by the installer, and exist on systems that meet the minimum requirements.

See What Are the Key Oracle Fusion Middleware Directories? in Understanding Oracle Fusion Middleware.

None.

Install Oracle Fusion Middleware Infrastructure

Install Oracle Fusion Middleware Infrastructure to create the Oracle home directory for Oracle SOA Suite and B2B.

See Installing the Infrastructure Software in Installing and Configuring the Oracle Fusion Middleware Infrastructure.

You do not need to configure Oracle Fusion Middleware Infrastructure.

Install Oracle SOA Suite

Install the Oracle SOA Suite software into the existing Oracle Infrastructure Oracle home.

See Installing the Oracle SOA Suite and Oracle Business Process Management Software in Installing and Configuring Oracle SOA Suite and Business Process Management.

You do not need to configure Oracle SOA Suite.

Install Oracle B2B

Install the Oracle B2B software into the existing Oracle Infrastructure and Oracle SOA Suite Oracle home.

See Installing the Oracle B2B and SOA Suite for Healthcare Integration Software.

Select B2B on the Installation Type screen.

Create a WebLogic domain

Use the configuration wizard to create and configure the WebLogic domain. Ensure that you select the appropriate options on the configuration screens.

See Configuring Oracle B2B Domain.

Follow the instructions provided for specific screens in Table A-2.

Start the servers

Once you complete the domain creation, start the administration and managed servers.

See Starting the Servers.

None.

Verify the configuration

Verify to ensure that the domain is configured properly.

See Verifying the Configuration.

None.

Next steps after installing and configuring Oracle B2B.

You can perform administrative as well as management tasks for the domain that you have just configured.

See Next Steps After Configuring the Domain.

None.

Configuration Options to Select for Oracle SOA Suite, Oracle B2B, and Business Activity Monitoring

Almost all of the screens and options that you must select while configuring Oracle SOA Suite, Oracle B2B, and Business Activity Monitoring are identical to those provided in Configuring the Domain. However, there are a couple of screens on which you must select different options, and Table A-2 lists the key screens and options. Ensure that you select the configuration options as provided in this section.

Table A-2 Key Screens and Configuration Options for Oracle SOA Suite, Oracle B2B, and Business Activity Monitoring Topology

Screen Description

Templates

This screen appears after you start the configuration wizard to create your domain.

In addition to the templates listed in Selecting the Configuration Templates for Oracle B2B, select Business Activity Monitoring - 12.2.1.3.0 [soa].

Managed Servers

On this screen, two managed servers are crated: bam_server1 and soa_server1, are created. Click Add and create two more managed servers: bam_server2 and soa_server2.

Ensure that in the Listen Address drop-down list, you select the IP address of the host on which the Managed Server will reside. Do not use All Local Addresses.

In the Server Groups drop-down list, ensure that soa_server1 and soa_server2 are targeted to SOA-MGD-SVRS and bam_server1 and bam_server2 to BAM 12-MGD-SVRS-ONLY.

Clusters

On this screen, create two clusters: soa_cluster1 and bam_cluster1.

Assign Servers to Clusters

On this screen, assign the servers as follows:

  • bam_server1 and bam_server2 to bam_cluster1

  • soa_server1 and soa_server2 to soa_cluster1

Machines

On this screen, create two machines: bam_machine1 and soa_machine1.

Assign Servers to Machine

On this screen, assign the servers as follows:

  • AdminServerbam_server1, and bam_server2 to bam_machine1.

  • soa_server1 and soa_server2 to soa_machine1.

Oracle SOA Suite, Oracle B2B, and Oracle Service Bus Topology

Use this topology to implement Oracle Service Bus in your Oracle B2B domain.

The Oracle Service Bus software is targeted to its own cluster; this ensures that there is no resource contention between the Oracle B2B and Oracle Service Bus software.

Figure A-2 Roadmap for Installing and Configuring the Oracle SOA Suite, B2B, and Oracle Service Bus Topology

Description of Figure A-2 follows
Description of "Figure A-2 Roadmap for Installing and Configuring the Oracle SOA Suite, B2B, and Oracle Service Bus Topology"

The following table describes the roadmap needed to configure this topology on your system.

Table A-3 Overview of the Installation and Configuration Steps for Oracle SOA Suite, B2B, and Oracle Service Bus Topology

Task Description More Information Special Instructions

Verify your system environment

Before beginning the installation, verify that the minimum system and network requirements are met.

See Roadmap for Verifying Your System Environment.

None.

Obtain the appropriate distribution

Oracle B2B requires and existing Oracle SOA Suite and Oracle Fusion Middleware Infrastructure installation. You must install B2B in the same Oracle home as Oracle Fusion Middleware Infrastructure, Oracle SOA Suite, and Oracle Service Bus.

See About Product Distributions.

You must obtain all distributions of Oracle Infrastructure, Oracle SOA Suite and Business Process Management, and Oracle Service Bus.

Determine your installation directories

Verify that the directories that will need to be created can be created or accessed by the installer, and exist on systems that meet the minimum requirements.

See What Are the Key Oracle Fusion Middleware Directories? in Understanding Oracle Fusion Middleware.

None.

Install Oracle Fusion Middleware Infrastructure

Install Oracle Fusion Middleware Infrastructure to create the Oracle home directory for Oracle SOA Suite and B2B.

See Installing the Infrastructure Software in Installing and Configuring the Oracle Fusion Middleware Infrastructure.

You do not need to configure Oracle Fusion Middleware Infrastructure.

Install Oracle SOA Suite

Install the Oracle SOA Suite software into the existing Oracle Infrastructure Oracle home.

See Installing the Oracle SOA Suite and Oracle Business Process Management Software in Installing and Configuring Oracle SOA Suite and Business Process Management.

You do not need to configure Oracle SOA Suite.

Install Oracle Service Bus

Install the Oracle Service Bus software into the existing Oracle Infrastructure and Oracle SOA Suite home.

See Installing the Oracle Service Bus Software in Installing and Configuring Oracle Service Bus.

You do not need to configure Oracle Service Bus.

Install Oracle B2B

Install the Oracle B2B software into the existing Oracle Infrastructure and Oracle SOA Suite Oracle home.

See Installing the Oracle B2B and SOA Suite for Healthcare Integration Software.

Select B2B on the Installation Type screen.

Create a WebLogic domain

Use the configuration wizard to create and configure the WebLogic domain. Ensure that you select the appropriate options on the configuration screens.

See Configuring Oracle B2B Domain.

Follow the instructions provided for specific screens in Table A-4.

Start the servers

Once you complete the domain creation, start the administration and managed servers.

See Starting the Servers.

None.

Verify the configuration

Verify to ensure that the domain is configured properly.

See Verifying the Configuration.

None.

Next steps after installing and configuring Oracle B2B.

You can perform administrative as well as management tasks for the domain that you have just configured.

See Next Steps After Configuring the Domain.

None.

Configuration Options to Select for Oracle SOA Suite, Oracle B2B, and Oracle Service Bus

Almost all of the screens and options that you must select while configuring Oracle SOA Suite, Oracle B2B, and Oracle Service Bus are identical to those provided in Configuring the Domain. However, there are a couple of screens on which you must select different options, and Table A-2 lists the key screens and options. Ensure that you select the configuration options provided here.

Table A-4 Key Screens and Configuration Options for Oracle SOA Suite, Oracle B2B, and Business Activity Monitoring Topology

Screen Description

Templates

This screen appears after you start the configuration wizard to create your domain.

In addition to the templates listed in Selecting the Configuration Templates for Oracle B2B, select Oracle Service Bus - 12.2.1.3.0 [soa].

Managed Servers

On this screen, two managed server are created: osb_server1 and soa_server1. Click Add and create two more managed servers: osb_server2 and soa_server2.

Ensure that in the Listen Address drop-down list, you select the IP address of the host on which the Managed Server will reside. Do not use All Local Addresses.

In the Server Groups drop-down list, ensure that soa_server1 and soa_server2 are targeted to SOA-MGD-SVRS and osb_server1 and osb_server2 to OSB 12-MGD-SVRS-ONLY.

Clusters

On this screen, create two clusters: soa_cluster1 and osb_cluster1.

Assign Servers to Clusters

On this screen, assign the servers as follows:

  • osb_server1 and osb_server2 to osb_cluster1

  • soa_server1 and soa_server2 to soa_cluster1

Machines

On this screen, create two machines: osb_machine1 and soa_machine1.

Assign Servers to Machine

On this screen, assign the servers as follows:

  • AdminServerosb_server1, and osb_server2 to osb_machine1.

  • soa_server1 and soa_server2 to soa_machine1.