This task uses the BIOS Setup Utility to see a list of installed Oracle Flash Accelerator F640 PCIe Cards.
You can install an operating system on an Oracle Flash Accelerator F640 PCIe Cards without any additional configuration. All installed Oracle Flash Accelerator F640 PCIe Card controllers (two per card) are visible to an OS installer program.
This causes the server to boot to BIOS on the next boot.
For more information, see Redirect Host Server Desktop or Storage Devices and refer to Oracle X8 Series Servers Administration Guide at https://www.oracle.com/goto/x86admindiag/docs.
For example, to reset the server:
From the local server, press the On/Standby button on the front panel of the server for approximately 1 second to power off the server, and then press the On/Standby button again to power on the server.
From the Oracle ILOM web interface, select Host Management → Power Control, and in the Select Action list box, select Graceful Reset, Reset, or Power On. Click Save, and then click OK.
From the Oracle ILOM CLI, type: reset /System.
For more details, see Controlling System Power.
The power-on self-test (POST) sequence begins. The system boots to the BIOS Setup Utility.
A list of installed Oracle Flash Accelerator F640 PCIe Cards appears.