Back Panel Components
The following figure shows the Oracle Exadata Database Server X8-8 chassis back panel components.
![An illustration with call outs showing the back indicator panel. An illustration with call outs showing the back indicator panel.](img/g6279_rear_callouts.jpg)
The following table lists the server back panel components.
Call Out | Component | Link |
---|---|---|
1 |
System B SYSTEM SUMMARY status indicator LEDs:
|
|
2 |
SMOD1 System B NET MGT Oracle ILOM (SP) network management 10/100/1000 GbE Network Ethernet port. |
|
3 |
SMOD1 System B SER MGT The SMOD1 System B serial management port service processor labeled SER MGT port uses an RJ-45 cable and terminal (or emulator) to provide access to the Oracle ILOM command-line interface (CLI). |
|
4 |
SMOD1 System B USB The SMOD1 System B USB 3.0 port supports hot-plugging of devices. |
|
5 |
SMOD1 System B Status indicators:
|
|
6 |
SMOD1 System B NET0-3 Four 10 GbE Network ports labeled NET0, NET1, NET2, and NET3 |
|
7 |
The Oracle Exadata Database Server X8-8 does not support SAS3 HDD/SSD storage drives. Storage drive slots are populated with storage drive filler panels. |
|
8 |
SMOD0 System A SYSTEM SUMMARY status indicators:
|
|
9 |
SMOD0 System A NET MGT Oracle ILOM service processor (SP) network management 10/100/1000 GbE Network Ethernet port. |
|
10 |
SMOD0 System A SER MGT Serial management port labeled SER MGT uses an RJ-45 cable and terminal (or emulator) to provide access to the Oracle ILOM command-line interface (CLI). |
|
11 |
SMOD0 System A USB USB 3.0 port supports hot-plugging of devices. |
|
12 |
SMOD0 System A Status indicators
|
|
13 |
SMOD0 System A NET0-3 Four 10 GbE Network ports labeled NET0, NET1, NET2, and NET3. |
|
14 |
PCIe card slots 1 (right) through 16 (left) PCIe card slots 1 (right) through 16 (left): Dual PCIe card carriers (DPCC) contain one or two PCIe cards. One DPCC populates two chassis PCIe card slots. SMOD0 System A: DPCC 0, DPCC 1, DPCC 2, DPCC 3; SMOD1 System B: DPCC 4, DPCC 5, DPCC 6, DPCC 7 |
|
15 |
AC power block AC inputs with cable clips (AC 0 through AC 3): SMOD0 System A: AC 3 , AC 2 (Top pair); SMOD1 System B: AC 1, AC 0 (bottom pair) |
Note:
The server does not provide video display ports on the SMODs. Use Oracle ILOM RKVMS to display video.