Remove the Front LED Indicator Module

1. Prepare the server for service.
   1. Power off the server and disconnect the power cords from the power supplies.

      See Powering Down the Server.

   2. Extend the server into the maintenance position.

      See Extend the Server to the Maintenance Position.

   3. Attach an antistatic wrist strap to your wrist, and then to a metal area on the chassis.

      See Take Antistatic Measures.

   4. Remove the server top cover.

      See Remove the Server Top Cover.

2. Disconnect the LED indicator module cable from the motherboard.

   Note:

   You might need to disconnect the SAS cable connections from the Oracle Storage 12 Gb SAS PCIe RAID HBA, Internal card or the NVMe cable connections from the Oracle Retimer card in PCIe slot 10 to access the LED indicator module motherboard cable connection. To ease removal of the LED indicator module cable, slightly lift the SAS or NVMe cable bundles from the cable trough along the left side of the chassis. See Servicing SAS Cables or Servicing NVMe Cables.

   
   
   
3. Remove the three No. 2 Phillips screws that secure the FIM cable and Temperature Sensor Access cover to the chassis [1].
   
   
   
4. Lift up and remove the FIM cable and Temperature Sensor Access cover from the FIM cable and Temperature Sensor Access cover slot [1].

   Set aside the FIM cable and Temp Sensor Access cover.

5. Remove the front LED indicator module [2].
   1. Remove the two No. 2 Phillips screws that secure the LED indicator module to the server front panel.
   2. Remove the LED indicator module and cable from the server front panel.

      Remove the LED indicator module cable by carefully pulling the cable through the cable trough along the left side of the chassis.

Related Topics:

• Server System-Level Status Indicators

• Install the Front LED Indicator Module