Update SNMP After a Library Firmware Upgrade (SL500, SL3000, SL8500)
Update the library and STA SNMP configurations after upgrading to one of the following library firmware versions or higher. Starting with these firmware versions, the library engine ID uses a new 32‐bit value and therefore you must update the SNMP configuration to use the new ID.
- SL500 – FRS 1468
- SL3000 – FRS 4.0
- SL8500 – FRS 8.0
Update the SNMP Settings in STA
- Log in to the STA user interface.
-
Edit the library connection details for the upgraded library. See Configure the SNMP Connection to a Library.
In the Define Library Connection Details dialog box, clear the Library Engine ID field and click Save. This forces STA to update the engine ID to the new value when it reconnects to the library.
- Re-establish the SNMP connection with the library. See Test the Library Connection.
- Record the new SNMP engine ID displayed on the SNMP connections table. You will use this value in the next part of the procedure.
Verify SNMP Settings on the Library