1. Library Guide
  2. Install the Library
  3. Configure the Library After Powering-on for the First Time
  4. Configure the Library Step 6 of 6: Review and Apply Initialization Settings

Configure the Library Step 6 of 6: Review and Apply Initialization Settings

Verify all settings are correct before applying the configuration.

  1. Verify the value of each initialization setting (tap Previous to alter any incorrect value before applying changes).
  2. To verify the network settings, tap the Settings button on the Home screen, and then tap the Network Port 1 and Network Port 2 tabs.
    Screenshot of Network Port 1 tab
  3. If all settings are correct, tap Apply.
  4. The library restarts. The duration of the restart depends on the size of library.

    Caution:

    Do not manually remove a cartridge magazine while the library is starting up. You could damage the robot or other internal components. Only manually remove the magazine when the library is operational and offline.
  5. After the restart completes, the Home screen appears on the touch screen. The Library Health displays in the status bar at the top of the screen. If the library is not Operational, perform the troubleshooting procedures listed in Service the Library before proceeding.