The Upgrade Assistant readiness check performs a read-only, pre-upgrade review of your existing Oracle Fusion Middleware schemas and Oracle WebLogic configurations.
The readiness check generates a formatted, time-stamped readiness report so you can address potential issues before you attempt the actual upgrade. If no issues are detected, you can begin the upgrade process. Oracle recommends that you read this report thoroughly before performing an upgrade.
For more information, see the Sample Readiness Report..
Note:
Alternatively, you can run the readiness check in -response mode to perform a silent readiness check using a response file. For more information on using a response file with the Upgrade Assistant, see Starting the Upgrade Assistant in Response File Mode.You can run the readiness check while your existing Oracle Fusion Middleware domain is online (while other users are actively using it), or offline.
Readiness checks can be run any number of times before any actual upgrades are attempted. However, do not run the readiness check after an upgrade has been performed, as the report will not provide valid results.
Note:
Oracle recommends that you run the readiness checks during off-peak hours to prevent possible performance degradation.
To perform a readiness check on your pre-upgrade environment, you will launch the Upgrade Assistant in -readiness
mode as shown below:
Change directory to ORACLE_HOME
/oracle_common/upgrade/bin
on Unix operating systems or ORACLE_HOME
\oracle_common\upgrade\bin
on Windows operating systems.
Enter the following command to start the Upgrade Assistant.
On UNIX operating systems:
./ua -readiness
On Windows operating systems:
ua.bat -readiness
Provide the required information in each of the Upgrade Assistant screens. The screens you see will vary depending on the upgrade options you select. The sections below describe the upgrade options and the information you will need to provide.
When the Upgrade Assistant is started in -readiness
mode, the following screens appear.
Alternatively, you can run the readiness check using a response file. For more information on using a response file with the Upgrade Assistant, see Starting the Upgrade Assistant in Response File Mode.
Note that these screens are a subset of the screens you will see.
Table 2-1 Upgrade Assistant Screens: Readiness Check
Screen | When Screen Appears | Description |
---|---|---|
Always. |
This screen provides an overview of the readiness check. |
|
Readiness Check Type:
|
Always. |
Readiness checks are only performed on schemas or component configurations that are at a supported upgrade starting point. There are two options to choose from. These options are described below:
|
When Individually Selected Schemas option is selected. |
This screen lists the available components for which the schemas will be selected. If you select something here, readiness check will be performed on that component's schema. |
|
All Schemas Component List |
Any time a schema readiness check is done. |
This screen is shown any time a schema readiness check is done. This could be when you select Individually Selected Schemas or Domain Based with the Include checks for all schemas option. |
Always. |
Use this screen to enter information required to connect to the selected schema and the database that hosts the schema. If the schema that is to be upgraded was created by RCU in a prior Fusion Middleware release then you will see a drop-down menu listing the possible schema names. |
|
Always. |
This screen provides a high-level overview of the readiness checks to be performed based on your selections. Click Save Response File if you plan to run the Upgrade Assistant again in —response (or silent) mode. |
|
Always. |
This screen displays the current status of the readiness check. Depending on what you have selected to check, the process can take several minutes. For a detailed report, click View Readiness Report. This button appears only after all the readiness checks are complete. Caution: To prevent performance degradation, consider running the readiness check during off-peak hours. |
|
If the readiness check completes successfully. |
You can now review the complete report. If the readiness check encounters an issue or error, review the log file to identify the issues, correct the issues, and then restart the readiness check. |
Now that you have completed the readiness checks for your domain, review the report to determine what actions - if any - need to be taken before the completion of a successful upgrade.
Each Readiness Report contains the following information:
Report Information | Description | Required Action |
---|---|---|
Overall Readiness Status: SUCCESS or FAILURE | The top of the report indicates whether the Upgrade readiness check passed or completed with one or more errors. | If the report completed with one or more errors, search for FAIL and correct the failing issues before attempting to upgrade. You can re-run the readiness check as many times as necessary before an upgrade. |
Timestamp |
This is the date and time that the report was generated. |
No action required. |
Log file location |
This is the directory location of the generated log file. |
No action required. |
Readiness Report location |
This is the directory location of the generated readiness report. |
No action required. |
Names of components that were checked |
The names and versions of the components included in the check and status. |
If your domain includes components that cannot be upgraded to this release, such as SOA Core Extension, then do not attempt an upgrade. |
Names of schemas that were checked |
The names and current versions of the schemas included in the check and status. |
Review the version numbers of your schemas. If your domain includes schemas that cannot be upgraded to this release, then do not attempt an upgrade. |
Status: FAIL |
The individual readiness check test detected an issue. |
Do not upgrade until all FAILED issues have been resolved. |
Status: PASS |
The readiness check test detected no issues. |
If your readiness check report shows only the PASS status, then you can upgrade your environment. Note, however, that the Readiness Check cannot detect issues with externals such as hardware or connectivity during an upgrade. You should always monitor the progress of your upgrade. |
Upgrade readiness check completed with one or more errors.
This readiness check report was created on Tue Oct 30 11:15:52 EDT 2015
Log file is located at: /scratch/yourname/oracle/work/middleware_latest/oracle_common/upgrade/logs/ua2015-10-30-11-14-06AM.log
Readiness Check Report File: /scratch/yourname/oracle/work/middleware_latest/oracle_common/upgrade/logs/readiness2015-10-30-11-15-52AM.txt
Starting readiness check of components.
Oracle Metadata Services
Starting readiness check of Oracle Metadata Services.
Schema User Name: DEV11_MDS
Database Type: Oracle Database
Database Connect String: machinename@yourcompany.com
VERSION Schema DEV11_MDS is currently at version 12.1.2.0.0. Readiness checks will now be performed.
Starting schema test: TEST_REQUIRED_TABLES Test that the schema contains all the required tables
Completed schema test: TEST_REQUIRED_TABLES --> Test that the schema contains all the required tables +++ PASS
Starting schema test: TEST_REQUIRED_PROCEDURES Test that the schema contains all the required stored procedures
EXCEPTION Schema is missing a required procedure: GETREPOSITORYFEATURES
Completed schema test: TEST_REQUIRED_PROCEDURES --> Test that the schema contains all the required stored procedures +++ FAIL
Starting schema test: TEST_REQUIRED_VIEWS Test that the schema contains all the required database views
Completed schema test: TEST_REQUIRED_VIEWS --> Test that the schema contains all the required database views +++ PASS
Starting index test for table MDS_ATTRIBUTES: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes
Completed index test for table MDS_ATTRIBUTES: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes +++ PASS
Starting index test for table MDS_COMPONENTS: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes
Completed index test for table MDS_COMPONENTS: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes +++ PASS
Starting index test for table MDS_DEPENDENCIES: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes
Completed index test for table MDS_DEPENDENCIES: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes +++ PASS
Starting index test for table MDS_DEPL_LINEAGES: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes
Completed index test for table MDS_DEPL_LINEAGES: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes +++ PASS
Starting index test for table MDS_LABELS: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes
Completed index test for table MDS_LABELS: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes +++ PASS
Starting index test for table MDS_LARGE_ATTRIBUTES: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes
Completed index test for table MDS_LARGE_ATTRIBUTES: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes +++ PASS
Starting index test for table MDS_METADATA_DOCS: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes
Completed index test for table MDS_METADATA_DOCS: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes +++ PASS
Starting index test for table MDS_NAMESPACES: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes
Completed index test for table MDS_NAMESPACES: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes +++ PASS
Starting index test for table MDS_PARTITIONS: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes
Completed index test for table MDS_PARTITIONS: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes +++ PASS
Starting index test for table MDS_PATHS: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes
Completed index test for table MDS_PATHS: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes +++ PASS
Starting index test for table MDS_PURGE_PATHS: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes
Completed index test for table MDS_PURGE_PATHS: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes +++ PASS
Starting index test for table MDS_SANDBOXES: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes
Completed index test for table MDS_SANDBOXES: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes +++ PASS
Starting index test for table MDS_STREAMED_DOCS: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes
Completed index test for table MDS_STREAMED_DOCS: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes +++ PASS
Starting index test for table MDS_TRANSACTIONS: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes
Completed index test for table MDS_TRANSACTIONS: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes +++ PASS
Starting index test for table MDS_TXN_LOCKS: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes
Completed index test for table MDS_TXN_LOCKS: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes +++ PASS
Starting schema test: TEST_REQUIRED_TRIGGERS Test that the schema has all the required triggers
Completed schema test: TEST_REQUIRED_TRIGGERS --> Test that the schema has all the required triggers +++ PASS
Starting schema test: TEST_MISSING_COLUMNS Test that tables and views are not missing any required columns
Completed schema test: TEST_MISSING_COLUMNS --> Test that tables and views are not missing any required columns +++ PASS
Starting schema test: TEST_UNEXPECTED_TABLES Test that the schema does not contain any unexpected tables
Completed schema test: TEST_UNEXPECTED_TABLES --> Test that the schema does not contain any unexpected tables +++ PASS
Starting schema test: TEST_UNEXPECTED_PROCEDURES Test that the schema does not contain any unexpected stored procedures
Completed schema test: TEST_UNEXPECTED_PROCEDURES --> Test that the schema does not contain any unexpected stored procedures +++ PASS
Starting schema test: TEST_UNEXPECTED_VIEWS Test that the schema does not contain any unexpected views
Completed schema test: TEST_UNEXPECTED_VIEWS --> Test that the schema does not contain any unexpected views +++ PASS
Starting index test for table MDS_ATTRIBUTES: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes
Completed index test for table MDS_ATTRIBUTES: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes +++ PASS
Starting index test for table MDS_COMPONENTS: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes
Completed index test for table MDS_COMPONENTS: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes +++ PASS
Starting index test for table MDS_DEPENDENCIES: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes
Completed index test for table MDS_DEPENDENCIES: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes +++ PASS
Starting index test for table MDS_DEPL_LINEAGES: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes
Completed index test for table MDS_DEPL_LINEAGES: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes +++ PASS
Starting index test for table MDS_LABELS: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes
Completed index test for table MDS_LABELS: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes +++ PASS
Starting index test for table MDS_LARGE_ATTRIBUTES: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes
Completed index test for table MDS_LARGE_ATTRIBUTES: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes +++ PASS
Starting index test for table MDS_METADATA_DOCS: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes
Completed index test for table MDS_METADATA_DOCS: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes +++ PASS
Starting index test for table MDS_NAMESPACES: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes
Completed index test for table MDS_NAMESPACES: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes +++ PASS
Starting index test for table MDS_PARTITIONS: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes
Completed index test for table MDS_PARTITIONS: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes +++ PASS
Starting index test for table MDS_PATHS: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes
Completed index test for table MDS_PATHS: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes +++ PASS
Starting index test for table MDS_PURGE_PATHS: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes
Completed index test for table MDS_PURGE_PATHS: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes +++ PASS
Starting index test for table MDS_SANDBOXES: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes
Completed index test for table MDS_SANDBOXES: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes +++ PASS
Starting index test for table MDS_STREAMED_DOCS: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes
Completed index test for table MDS_STREAMED_DOCS: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes +++ PASS
Starting index test for table MDS_TRANSACTIONS: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes
Completed index test for table MDS_TRANSACTIONS: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes +++ PASS
Starting index test for table MDS_TXN_LOCKS: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes
Completed index test for table MDS_TXN_LOCKS: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes +++ PASS
Starting schema test: TEST_UNEXPECTED_TRIGGERS Test that the schema does not contain any unexpected triggers
Completed schema test: TEST_UNEXPECTED_TRIGGERS --> Test that the schema does not contain any unexpected triggers +++ PASS
Starting schema test: TEST_UNEXPECTED_COLUMNS Test that tables and views do not contain any unexpected columns
Completed schema test: TEST_UNEXPECTED_COLUMNS --> Test that tables and views do not contain any unexpected columns +++ PASS
Starting datatype test for table MDS_ATTRIBUTES: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
Completed datatype test for table MDS_ATTRIBUTES: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
Starting datatype test for table MDS_COMPONENTS: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
Completed datatype test for table MDS_COMPONENTS: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
Starting datatype test for table MDS_DEPENDENCIES: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
Completed datatype test for table MDS_DEPENDENCIES: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
Starting datatype test for table MDS_DEPL_LINEAGES: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
Completed datatype test for table MDS_DEPL_LINEAGES: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
Starting datatype test for table MDS_LABELS: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
Completed datatype test for table MDS_LABELS: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
Starting datatype test for table MDS_LARGE_ATTRIBUTES: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
Completed datatype test for table MDS_LARGE_ATTRIBUTES: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
Starting datatype test for table MDS_METADATA_DOCS: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
Completed datatype test for table MDS_METADATA_DOCS: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
Starting datatype test for table MDS_NAMESPACES: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
Completed datatype test for table MDS_NAMESPACES: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
Starting datatype test for table MDS_PARTITIONS: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
Completed datatype test for table MDS_PARTITIONS: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
Starting datatype test for table MDS_PATHS: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
Completed datatype test for table MDS_PATHS: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
Starting datatype test for table MDS_PURGE_PATHS: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
Completed datatype test for table MDS_PURGE_PATHS: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
Starting datatype test for table MDS_SANDBOXES: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
Completed datatype test for table MDS_SANDBOXES: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
Starting datatype test for table MDS_STREAMED_DOCS: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
Completed datatype test for table MDS_STREAMED_DOCS: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
Starting datatype test for table MDS_TRANSACTIONS: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
Completed datatype test for table MDS_TRANSACTIONS: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
Starting datatype test for table MDS_TXN_LOCKS: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
Completed datatype test for table MDS_TXN_LOCKS: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
Starting permissions test for table MDS_ATTRIBUTES: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions
Completed permissions test for table MDS_ATTRIBUTES: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions +++ PASS
Starting permissions test for table MDS_COMPONENTS: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions
Completed permissions test for table MDS_COMPONENTS: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions +++ PASS
Starting permissions test for table MDS_DEPENDENCIES: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions
Completed permissions test for table MDS_DEPENDENCIES: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions +++ PASS
Starting permissions test for table MDS_DEPL_LINEAGES: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions
Completed permissions test for table MDS_DEPL_LINEAGES: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions +++ PASS
Starting permissions test for table MDS_LABELS: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions
Completed permissions test for table MDS_LABELS: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions +++ PASS
Starting permissions test for table MDS_LARGE_ATTRIBUTES: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions
Completed permissions test for table MDS_LARGE_ATTRIBUTES: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions +++ PASS
Starting permissions test for table MDS_METADATA_DOCS: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions
Completed permissions test for table MDS_METADATA_DOCS: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions +++ PASS
Starting permissions test for table MDS_NAMESPACES: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions
Completed permissions test for table MDS_NAMESPACES: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions +++ PASS
Starting permissions test for table MDS_PARTITIONS: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions
Completed permissions test for table MDS_PARTITIONS: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions +++ PASS
Starting permissions test for table MDS_PATHS: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions
Completed permissions test for table MDS_PATHS: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions +++ PASS
Starting permissions test for table MDS_PURGE_PATHS: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions
Completed permissions test for table MDS_PURGE_PATHS: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions +++ PASS
Starting permissions test for table MDS_SANDBOXES: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions
Completed permissions test for table MDS_SANDBOXES: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions +++ PASS
Starting permissions test for table MDS_STREAMED_DOCS: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions
Completed permissions test for table MDS_STREAMED_DOCS: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions +++ PASS
Starting permissions test for table MDS_TRANSACTIONS: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions
Completed permissions test for table MDS_TRANSACTIONS: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions +++ PASS
Starting permissions test for table MDS_TXN_LOCKS: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions
Completed permissions test for table MDS_TXN_LOCKS: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions +++ PASS
Starting permissions test: TEST_DBA_TABLE_GRANTS Test that DBA user has privilege to view all user tables
Completed permissions test: TEST_DBA_TABLE_GRANTS --> Test that DBA user has privilege to view all user tables +++ PASS
Starting schema test: TEST_ENOUGH_TABLESPACE Test that the schema tablespaces automatically extend if full
Completed schema test: TEST_ENOUGH_TABLESPACE --> Test that the schema tablespaces automatically extend if full +++ PASS
Starting schema test: TEST_USER_TABLESPACE_QUOTA Test that tablespace quota for this user is sufficient to perform the upgrade
Completed schema test: TEST_USER_TABLESPACE_QUOTA --> Test that tablespace quota for this user is sufficient to perform the upgrade +++ PASS
Starting schema test: TEST_ONLINE_TABLESPACE Test that schema tablespaces are online
Completed schema test: TEST_ONLINE_TABLESPACE --> Test that schema tablespaces are online +++ PASS
Starting schema test: TEST_DATABASE_VERSION Test that the database server version number is supported for upgrade
INFO Database product version: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Completed schema test: TEST_DATABASE_VERSION --> Test that the database server version number is supported for upgrade +++ PASS
Finished readiness check of Oracle Metadata Services with status: FAILURE.
Common Infrastructure Services
Starting readiness check of Common Infrastructure Services.
Schema User Name: DEV1212_STB
Database Type: Oracle Database
Database Connect String: machinename@yourcompany.com
VERSION Schema STB is currently at version 12.1.2.0.0. Readiness checks will now be performed.
Starting schema test: TEST_REQUIRED_TABLES Test that the schema contains all the required tables
Completed schema test: TEST_REQUIRED_TABLES --> Test that the schema contains all the required tables +++ PASS
Completed schema test: TEST_REQUIRED_TABLES --> Test that the schema contains all the required tables +++ PASS
Starting schema test: TEST_UNEXPECTED_TABLES Test that the schema does not contain any unexpected tables
Completed schema test: TEST_UNEXPECTED_TABLES --> Test that the schema does not contain any unexpected tables +++ PASS
Starting schema test: TEST_REQUIRED_VIEWS Test that the schema contains all the required database views
Completed schema test: TEST_REQUIRED_VIEWS --> Test that the schema contains all the required database views +++ PASS
Starting schema test: TEST_MISSING_COLUMNS Test that tables and views are not missing any required columns
Completed schema test: TEST_MISSING_COLUMNS --> Test that tables and views are not missing any required columns +++ PASS
Starting schema test: TEST_UNEXPECTED_COLUMNS Test that tables and views do not contain any unexpected columns
Completed schema test: TEST_UNEXPECTED_COLUMNS --> Test that tables and views do not contain any unexpected columns +++ PASS
Starting schema test: TEST_UNEXPECTED_PROCEDURES Test that the schema does not contain any unexpected stored procedures
Completed schema test: TEST_UNEXPECTED_PROCEDURES --> Test that the schema does not contain any unexpected stored procedures +++ PASS
Starting permissions test: TEST_DBA_TABLE_GRANTS Test that DBA user has privilege to view all user tables
Starting permissions test: TEST_DBA_TABLE_GRANTS Test that DBA user has privilege to view all user tables
Completed permissions test: TEST_DBA_TABLE_GRANTS --> Test that DBA user has privilege to view all user tables +++ PASS
Completed permissions test: TEST_DBA_TABLE_GRANTS --> Test that DBA user has privilege to view all user tables +++ PASS
Starting permissions test for table COMPONENT_SCHEMA_INFO: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions
Completed permissions test for table TEST_TABLE_GRANTS: Test that tables have the proper GRANT permissions --> PASS +++ {3}
Starting permissions test for table SERVICETABLE: TEST_TABLE_GRANTS --> Test that tables have the proper GRANT permissions
Completed permissions test for table TEST_TABLE_GRANTS: Test that tables have the proper GRANT permissions --> PASS +++ {3}
Starting datatype test for table COMPONENT_SCHEMA_INFO: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
Completed datatype test for table COMPONENT_SCHEMA_INFO: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
Starting datatype test for table SERVICETABLE: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
Completed datatype test for table SERVICETABLE: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
Starting index test for table COMPONENT_SCHEMA_INFO: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes
Completed index test for table COMPONENT_SCHEMA_INFO: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes +++ PASS
Starting index test for table COMPONENT_SCHEMA_INFO: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes
Completed index test for table COMPONENT_SCHEMA_INFO: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes +++ PASS
Starting index test for table SERVICETABLE: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes
Completed index test for table SERVICETABLE: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes +++ PASS
Starting index test for table SERVICETABLE: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes
Completed index test for table SERVICETABLE: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes +++ PASS
Starting schema test: TEST_UNEXPECTED_TRIGGERS Test that the schema does not contain any unexpected triggers
Completed schema test: TEST_UNEXPECTED_TRIGGERS --> Test that the schema does not contain any unexpected triggers +++ PASS
Starting schema test: TEST_ENOUGH_TABLESPACE Test that the schema tablespaces automatically extend if full
Starting schema test: TEST_ENOUGH_TABLESPACE Test that the schema tablespaces automatically extend if full
Completed schema test: TEST_ENOUGH_TABLESPACE --> Test that the schema tablespaces automatically extend if full +++ PASS
Completed schema test: TEST_ENOUGH_TABLESPACE --> Test that the schema tablespaces automatically extend if full +++ PASS
Starting schema test: TEST_ONLINE_TABLESPACE Test that schema tablespaces are online
Starting schema test: TEST_ONLINE_TABLESPACE Test that schema tablespaces are online
Completed schema test: TEST_ONLINE_TABLESPACE --> Test that schema tablespaces are online +++ PASS
Completed schema test: TEST_ONLINE_TABLESPACE --> Test that schema tablespaces are online +++ PASS
Starting schema test: TEST_USER_TABLESPACE_QUOTA Test that tablespace quota for this user is sufficient to perform the upgrade
Starting schema test: TEST_USER_TABLESPACE_QUOTA Test that tablespace quota for this user is sufficient to perform the upgrade
Completed schema test: TEST_USER_TABLESPACE_QUOTA --> Test that tablespace quota for this user is sufficient to perform the upgrade +++ PASS
Completed schema test: TEST_USER_TABLESPACE_QUOTA --> Test that tablespace quota for this user is sufficient to perform the upgrade +++ PASS
Starting schema test: TEST_DATABASE_VERSION Test that the database server version number is supported for upgrade
Starting schema test: TEST_DATABASE_VERSION Test that the database server version number is supported for upgrade
INFO Database product version: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Completed schema test: TEST_DATABASE_VERSION --> Test that the database server version number is supported for upgrade +++ PASS
Completed schema test: TEST_DATABASE_VERSION --> Test that the database server version number is supported for upgrade +++ PASS
Finished readiness check of Common Infrastructure Services with status: SUCCESS.
Finished readiness check of components.