Sun Fire T1000 Server Installation Guide
819-3247-11
Contents |
2. Installing the Sun Fire T1000 Server
Installing the Server in a Rack
To Install the Mounting Brackets
To Install the Server in the Rack
To Install the Cable Management Bracket
Removing the Server From the Rack for Service
To Connect the SC Serial Management Port
To Connect the SC Network Management Port
To Connect the Ethernet Network Cables
To Connect the AC Power Cables to the Server
Powering On the System for the First Time
To Power On the System for the First Time
Logging In To the ALOM-CMT System Controller
To Log In To the System Controller Using the Serial Management Port
To Log In To the System Controller Using the Network Management Port
To Configure the System Controller Network Management Port
To Reset the System Controller
Using the ALOM-CMT System Controller for Common Operations
To Initiate the Power On Sequence
To Connect to the System Console
Example of a Normal System Initialization
Booting the Solaris Operating System
To Boot the Solaris Operating System
(Optional) To Reset the System
A. Updating the Sun Fire T1000 Firmware
Connecting the Network Interface to the Network
To Connect the Network Interface to the Network
C. Configuring the Network Management Port
To Configure the System Controller Network Management Port
Copyright © 2006, Sun Microsystems, Inc. All Rights Reserved.