|C H A P T E R 6|
Finishing Up Servicing
This chapter describes how to finish up servicing the server.
The following topics are covered:
This section provides the finishing tasks in servicing your server.
1. Place the top cover on the chassis.
Set the cover down so that the cover hangs over the rear of the server by about an inch (2.5 cm).
2. Slide the cover forward until it latches into place.
1. Refer to the Sun Fire T1000 Server Installation Guide for installation instructions.
2. After you have reinstalled the server chassis in the rack, reconnect all cables that you disconnected when you removed the chassis from the rack.
Reconnect the power cord to the power supply.