Documentation Home
> Sun Ultra 27 Workstation Service Manual
Sun Ultra 27 Workstation Service Manual
Book Information
Index
A
B
C
D
E
F
G
H
I
M
O
P
R
S
T
U
V
Preface
Chapter 1 Sun Ultra 27 Workstation Hardware Features
Front Panel
Back Panel
Internal Components and Cables
Power Supply Cables and Connections
Component Cables and Connections
Chapter 2 Troubleshooting
Performing an External Visual Inspection of the Workstation
To Perform an External Visual Inspection
Assessing the Issue
Troubleshooting the Issue
Performing an Internal Visual Inspection
To Perform an Internal Visual Inspection
Obtaining Technical Assistance
Chapter 3 Maintaining the Workstation
Powering the Workstation On and Off
To Power On the Workstation
To Power Off the Workstation
Observing Electrostatic Discharge (ESD) Precautions
Required Tools and Supplies
Opening the Workstation
To Remove the Left-Side Access Panel
To Remove the Front Bezel
Closing the Workstation and Preparing for Operation
Close the Workstation and Prepare of Operation
Install the Front Bezel
Install the Left-Side Access Panel
Component FRU and CRU List
Removing and Installing a Hard Drive
To Remove a Hard Drive
To Install a Hard Drive
Converting From SATA to SAS
To Install SAS Card Components
Replacing the Storage Backplane
To Replace the Storage Backplane
Replacing the DVD Drive
To Remove the DVD Drive
To Install the DVD Drive
Removing and Installing DIMMs
To Remove DIMMs
Memory Population Rules
Supported Memory Configurations
To Install DIMMs
Removing and Installing a PCIe2 x16 Card
To Remove a PCIe2 x16 Card
To Install a PCIe2 x16 Card
Adding Supplemental Power to PCIe2 Cards
To Add Supplemental Power to a Single PCIe2 Card
To Add Supplemental Power to Two PCIe2 Cards Using the Splitter Cable
To Add Supplemental Power to a Single PCIe2 Card Using the 8–Pin Adapter Cable
Removing and Installing PCIe Cards
To Remove a PCIe Card
To Install a PCIe Card
Replacing the System Battery
To Replace the System Battery
Replacing the System Fan
To Replace the System Fan
Replacing the Power Supply
To Replace the Power Supply
Replacing the I/O Board Assembly
To Replace the I/O Board Assembly
Replacing the System Cables
To Replace the System Cables
Replacing the Heat Sink and CPU
To Remove the Heat Sink and CPU
Replacing the Motherboard
To Remove the Motherboard
Installing the Motherboard
Updating the BIOS and Accessing the BIOS Setup Utility
To Update the BIOS
To Access the BIOS Setup Utility
Chapter 4 Running Diagnostics
Understanding the Diagnostic Partition
To Start Pc-Check Diagnostics
System Information Menu
Advanced Diagnostics
To Test Hard Drives
Immediate Burn In Testing
To Perform Immediate Burn-In Testing
Deferred Burn In Testing
To Perform Deferred Burn-In Testing
Create Diagnostic Partition Option
To Add a Diagnostic Partition to the First Bootable Disk
To Create a Log File on the Diagnostic Partition
To Access the Diagnostic Partition Under Red Hat Linux
To Access the Diagnostic Partition Under the Solaris 10 OS
To Access the Diagnostic Partition on a Windows System
Show Results Summary
Print Results Report
About Pc-Check
Exit to DOS
Appendix A Sun Ultra 27 Workstation System Specifications
System Components and Features
PCIe and PCI Expansion Slots
Additional Ports
Memory Rules and Supported Configurations
Memory Population Rules
Supported Memory Configurations
Physical Specifications
Power Specifications
Environmental Specifications
Appendix B BIOS POST Code Checkpoints
© 2010, Oracle Corporation and/or its affiliates