| Skip Navigation Links | |
| Exit Print View | |
|
Sun Fire X4800 Server Product Documentation |
Administration, Diagnostics, and Service
Overview of the Diagnostics Guide
Introduction to System Diagnostics
How to Gather Service Visit Information
How to Troubleshoot Power Problems
How to Externally Inspect the Server
How to Internally Inspect the Server
How to Read the DIMM Fault LEDs
Identifying DIMM Error Messages
How BIOS POST Memory Testing Works
How to Interpret DIMM Error Messages in the SEL
How to Isolate and Correct DIMM ECC Errors
Default BIOS Power-On Self-Test (POST) Events
Using the ILOM to Monitor the Host
Viewing the ILOM Sensor Readings
How to Use the ILOM Web Interface to View the Sensor Readings
How to Use the ILOM Command-Line Interface to View the Sensor Readings
How to View Fault Status Using the ILOM Web Interface
How to View Fault Status With the Command-Line Interface
How to Clear Faults in the Web Interface
How to Clear Faults Using the Command-Line Interface
Viewing the ILOM System Event Log
How to View the System Event Log Using the ILOM Web Interface
How to View the System Event Log With the ILOM Command-Line Interface
How to Clear the System Event Log Using the ILOM Web Interface
How to Clear the System Event Log Using the ILOM Command-Line Interface
Interpreting Event Log Time Stamps
How to Reset the ILOM SP Using the Web Interface
How to Reset the ILOM SP Using the Command-Line Interface
Creating a Data Collector Snapshot
How to Create a Snapshot With the ILOM Web Interface
How to Create a Snapshot With the ILOM Command-Line Interface
Using SunVTS Diagnostics Software
Introduction to SunVTS Diagnostic Test Suite
How to Diagnose Server Problems With the Bootable Diagnostics CD
Performing Pc-Check Diagnostic Tests
How to Run Pc-Check Diagnostics
How to Perform Immediate Burn-In Testing
How to Create and Save Scripts for Deferred Burn-in Testing
How to View Pc-Check Files With the Text File Editor
How to View Test Results Using Show Results Summary
If you are having a problem with your system, you can use the Pc-Check diagnostic tests to diagnose and possibly solve the problem.
The Pc-Check diagnostics can test and detect problems on all motherboard components, drives, ports, and slots. You can access and execute this program from ILOM.
There are three options for running Pc-Check:
Manual – Runs Pc-Check in manual mode and brings you to a Pc-Check menu.
Enabled – Runs basic diagnostics and takes about 3 minutes.
Extended – Runs detailed diagnostics and takes about 30 minutes.
The default for Run Diagnostics on Boot is Disabled, which means that Pc-Check does not run when you boot the server. The other Pc-Check levels, Enabled, Extended, and Manual, will run Pc-Check automatically when the server boots.
The only way you can see the results of Pc-Check diagnosis is to run Pc-Check in Manual mode. The output is displayed on a monitor or serial console connected to the system. See Viewing the Pc-Check Results. The results of the automatic tests are also written to nonvolatile memory on the SP, where Oracle Services can access them.
|