About This Documentation (PDF and HTML)
SAS Device Access to the Chassis SAS-2 Domain
Host Access to Storage Module Resources Using the Sun Blade Zone Manager
How to Assign Storage to Hosts Using the CMM ILOM Web Interface
How to Assign Storage to Hosts Using the CMM ILOM CLI
Overview of Storage Module Management
Management Options Using the CMM ILOM
Management Options Using the Sun Storage 6Gb SAS REM RAID HBA (SGX-SAS6-R-REM-Z)
Performing Maintenance and Hot Plug Actions
Preparing for Hot Plug Actions
Recovering Zoning Configurations
Upgrading Storage Module Firmware
Importing Existing Virtual Drives to a Replacement REM
Replacing a REM on a SPARC System
Replacing a REM on an x86 System
Storage Module Sensors and Indicators
Displaying Sensor and Indicator Information Using the CMM ILOM Web Interface
Displaying Sensor and Indicator Information Using the CMM ILOM CLI
The Sun Storage 6Gb SAS REM HBA (SGX-SAS6-REM-Z) is a SAS-2 RAID Expansion Module based on the LSI Fusion-MPT IR (Integrated RAID) technology. Includes LSI MegaRAID Storage Manager (MSM) software, a command line interface (using SAS2IRCU or the BIOS-based LSI Configuration Utility). Basic management options include (refer to the MegaRAID documentation for a complete list):
|
Note - If your REM fails, but the drives are good, you can install an identical replacement REM and import the existing virtual drive configurations. For information about importing existing virtual drives, see Importing Existing Virtual Drives to a Replacement REM.
Complete information for using the REM management software to perform storage module tasks is included in the LSI MegaRAID SAS Software User's Guide. This manual is available on the LSI support site at: