About This Documentation (PDF and HTML)
SAS Device Access to the Chassis SAS-2 Domain
Host Access to Storage Module Resources Using the Sun Blade Zone Manager
How to Assign Storage to Hosts Using the CMM ILOM Web Interface
How to Assign Storage to Hosts Using the CMM ILOM CLI
Overview of Storage Module Management
Management Options Using the CMM ILOM
Management Options Using the Sun Storage 6Gb SAS REM RAID HBA (SGX-SAS6-R-REM-Z)
Management Options Using the Sun Storage 6Gb SAS REM HBA (SGX-SAS6-REM-Z)
Performing Maintenance and Hot Plug Actions
Preparing for Hot Plug Actions
Recovering Zoning Configurations
Upgrading Storage Module Firmware
Importing Existing Virtual Drives to a Replacement REM
Replacing a REM on a SPARC System
Replacing a REM on an x86 System
Storage Module Sensors and Indicators
Displaying Sensor and Indicator Information Using the CMM ILOM Web Interface
Displaying Sensor and Indicator Information Using the CMM ILOM CLI
Your Sun Blade 6000 Modular System must have a PCIe 2.0 compliant midplane. For more information on determining this, refer to the Sun Blade 6000 Modular System Product Notes.
Your Sun Blade 6000 Modular System must have CMM ILOM firmware that supports the Sun Blade Storage Manager M2 and the servers that will use it. For a list of the minimum CMM ILOM firmware requirements to support SAS-2 and the CMM ILOM Sun Blade Zone Manager, refer to Supported Firmware, Hardware and Software in Sun Blade Storage Module M2 Product Notes. The latest firmware can be downloaded from http://www.oracle.com/goto/blades.
You must have already installed your SAS-2 supported components (server module with SAS-2 REM, SAS-2 NEMs, and SAS-2 storage modules).
Your SAS-2 NEM must be at a firmware version level that supports zoning. Check your NEM Product Notes for version information and available updates.
You must have already performed initial setup and configuration of your CMM ILOM and planned your connection method (web browser or CLI) as described in the Oracle Integrated Lights Out Manager (ILOM) 3.0 Getting Started Guide.
To assign storage module resources to hosts, see: