Features Overview

The key features of the Virtualized Multi-Fabric 10GbE M2 NEM are listed in the following table:

Table 1 Virtualized Multi-Fabric 10GbE M2 NEM Features Overview

Feature	Specifications
Service Processor (SP)	Aspeed AST2000 (service processor) 128MB DDR DRAM, 16MB flash SP Ethernet port through and Ethernet switch to the CMM
LSI SAS-2 x36 Expander	Arm7-S Processor (SAS expander device) 8MB SRAM (4MB fall back), 8MB flash Management in-band and via I2C, expander Ethernet port through an Ethernet switch to CMM
Management Interfaces	10/100BASE-T Ethernet port to the Chassis Monitoring Module (CMM) I2C to CMM
Ports	Four External x4 mini SAS-2 ports (external SAS connections are currently not supported) Ten 10/100/1000BASE-T Ethernet (RJ-45) ports Two SFP+ ports that support the SFP+ short range (SR) modules
Server Module Interfaces (per Blade)	PCIe up to x8 SAS-2 x2 GbE x1
Updates	All software and embedded firmware can be field upgraded
Indicators/Controls	Ethernet Link Status and Activity SFP+ Link Status and Activity SIS LEDs, Locate button, Attention button Mini-SAS LED that is bi-functional for link and activity Per Blade 10Gbps Link status in the NEM ILOM web interface
Health	Voltage monitoring Temperature monitoring Fault detection
Power Supplies	3.3V_AUX from chassis midplane 12V from chassis midplane Other voltages generated on board
Environmental	Cooling: top-to-back forced air Operating: Humidity: 10-90% non-condensing Temperature: 0 to 35°C operating (32 to 95°F) Altitude: 0-10,000 ft (3048 meters) Non operating Humidity: 5-95% non-condensing Temperature: –40 to 70°C operating (-40 to 158°F) Altitude: 39,370 ft (12000 meters)

Skip Navigation Links
Exit Print View
	Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 Network Express Module User's Guide Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 Network Express Module Documentation Library