Skip Navigation Links | |
Exit Print View | |
Sun Blade 6000 Virtualized Multi-Fabric 10GE M2 Network Express Module Documentation Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 Network Express Module Documentation Library |
About This Documentation (PDF and HTML)
Overview of Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 NEM User's Guide
Features of the Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 NEM
Performing Hot Plug Insertion and Removal
Configuring PCIe Device Hot Plug in Linux
How to Prepare the PCIe Interface for Hot Removal
How to Prepare SAS Interfaces for Hot Plug Removal
Restoring SAS Configurations After NEM Installation
Saving the Zoning Configuration to a Backup File Using the CMM ILOM
How to Save the Zoning Configuration to a Backup File Using the CMM CLI
How to Save the Zoning Configuration to a Backup File Using the CMM Web Interface
Recovering Zoning Configurations
How to Recover Zoning Configurations Using the CLI
Installing or Replacing the Virtualized M2 NEM
Installing and Removing SFP+ Optical Transceiver Modules
Booting Over the Virtualized M2 NEM 10-Gigabit Ethernet Port
Booting over the Network With an x86 Blade Server
Booting over the Network With a SPARC Blade Server
Installing and Configuring the hxge Driver on a Solaris SPARC or x86 Platform
How to Configure the Network Host Files
Configuring the hxge Device Driver Parameters
Configuring the Jumbo Frames Feature
Installing and Configuring the hxge Driver on a Linux Platform
Installing and Removing the Driver on a Linux Platform
Configuring the Network Interface
Checking and Testing the hxge Device
Changing the hxge Driver Configuration
Installing and Configuring Drivers on a Windows Platform
Installing Drivers on a Windows Platform
Installing and Configuring Drivers on a VMware ESX Server Platform
Installing the ESX Server Drivers on an Existing ESX Server
Installing the ESX Server Drivers With a New ESX Installation
Configuring the Virtual NEM M2 Network Adapters
Accessing ILOM Documentation and Updates
Enabling Private and Failover Mode
Fixing Problems with Oracle ILOM Using the Preboot Menu
Overview of the Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 NEM Product Notes
Supported Software and Firmware
Hardware and Networking Issues
Packet Drop at 1Gb with 100m Cable (6879222)
Special Instructions for Network PXE Booting for the Sun Blade X3-2B Server (7183913)
ILOM Failover and Private Mode Cannot Be Enabled Simultaneously (6911661)
Cannot Set NEM SP IP Address When NEM Is Powered Off (6938660)
ipmitool Command Fails (6940791)
Prepare-to-Remove and Return-to-Service Does Not Work on NEM ILOM (6948103)
Green Rear SAS Link LEDs All Turn On When Setting Prepare-to-Remove (6950981)
NEM SAS Firmware Updates Must be Performed from the CMM and Not the NEM SP (7020854)
Oracle Linux: Server Module Might Hang When NEM Replaced Repeatedly (6935520)
Oracle Solaris: Virtualized M2 NEM hxge 10 GbE Driver Can Hang Under High Stress (6932684)
Linux: Configuring PCIe Hot Plug in Linux (7075694)
Windows: Incorrect Driver Version Displayed When Driver File Properties is Viewed (7069358)
Note - For advanced users or Oracle technicians: The CMM ILOM configuration backup file is an XML file. If you have multiple CMM ILOM configuration backup files and the latest version does not have the zoning configurations you need, you have the option of copying the storage assignments section of one file and pasting it into another. For this to work, your storage modules and server blades must be in the same physical slots for the zoning configurations you want to restore. For more information on performing this procedure, refer to the Oracle ILOM documentation.
Before You Begin
Make sure that you have permissions for one of the following roles: Admin, User Management, Console, Reset and Host Control, and Read Only (a,u,c,r,o).
You must have previously created a backup CMM ILOM configuration file that contains the zoning configurations you want to restore. See Saving the Zoning Configuration to a Backup File Using the CMM ILOM.
http://chassis_sp_ipaddress/
Where chassis_sp_ipaddress is the IP address of your chassis service processor.
The ILOM login page appears.
The CMM ILOM main page is displayed.
The CMM maintenance sub-tabs are displayed.
The Backup/Restore page is displayed.
Fill out the information on the page to restore your backup file.
For complete instructions on using ILOM Backup/Restore, refer to the Oracle Integrated Lights Out Manager (ILOM) 3.0 Web Interface Procedures Guide.
The Restore operation executes.
Note - While the Restore operation is executing, sessions on the ILOM SP will be temporarily suspended. The sessions will resume normal operation once the Restore operation is complete. A Restore operation typically takes two to three minutes to complete.