Install the DVD/USB Module
Before You Begin
Caution - Be certain the DVD type and Hard Drive backplane are compatible: both are SATA
or both are PATA types. Special keying will resist installation of a PATA
DVD into a SATA-type DVD bay. Do not force the module if you
meet resistance or you may damage the backplane, DVD/USB Module, or both.
- Slide the DVD/USB module into the front of the chassis until it seats.
Figure 91 Installing the DVD/USB Module (Illustrates installing in a SPARC Enterprise T5120 server)
- Slide the pull tab back into the system.
- Install the hard drive you removed during the DVD/USB module removal procedure.
- Plug in the power cords.
See Connect Power Cords to the Server.
- Power on the system.
See Power On the Server Using the poweron Command or Power On the Server Using the Front Panel Power Button.