Documentation, Support, and Training
Network Management Connector and Pins
USB Management Connector and Pins
Preparing to Install the Gateway
Suggested Tools for Installation
Antistatic Precautions for Installation
Verify Shipping Carton Contents
Assemble the Ethernet Splitter Data Cables
Install the Gateway in the Rack
Verifying the InfiniBand Fabric
Understanding Routing Through the Gateway
Understanding Administrative Commands
Administering the I4 Switch Chip
Controlling the I4 Switch Chip
Administering Gateway Resources
Installing Gateway Supportive Software
Creating VNICs Under Gateway Manual Mode
Creating VNICs Under Host Manual Mode
Controlling Gateway Ports and Parameters
Administering the InfiniBand Fabric
Monitoring the InfiniBand Fabric
Controlling the InfiniBand Fabric
Administering the Subnet Manager
Controlling the Subnet Manager
Understanding Oracle ILOM on the Gateway
Understanding Oracle ILOM Targets
Administering Oracle ILOM (CLI)
Accessing Oracle ILOM From the CLI
Switching Between the Oracle ILOM Shell and the Linux Shell
Monitoring Oracle ILOM Targets (CLI)
Controlling Oracle ILOM Targets (CLI)
Upgrading the Gateway Firmware Through Oracle ILOM (CLI)
Administering Oracle ILOM (Web)
Access Oracle ILOM From the Web Interface
Monitoring Oracle ILOM Targets (Web)
Controlling Oracle ILOM Targets (Web)
Upgrade the Gateway Firmware (Web)
Accessing the Rear Panel Diagram
Accessing Status Pane Information
Monitoring Parameters and Status
Administering Oracle ILOM (SNMP)
Monitoring Oracle ILOM Targets (SNMP)
Controlling Oracle ILOM Targets (SNMP)
Display the Sensor States (IPMI)
Display the Sensor Information (IPMI)
Display the System Event Log (IPMI)
Display FRU ID Information (IPMI)
Display Gateway Status LED States (IPMI)
Disable the Locator LED (IPMI)
Understanding Oracle ILOM Commands
Understanding Service Procedures
Antistatic Precautions for Service
Remove the Gateway From the Rack
Understanding Hardware Commands
Linux Shells for Hardware Commands
Understanding InfiniBand Commands
Linux Shells for InfiniBand Commands
Understanding the SUN-DCS-MIB MIB OIDs
SUN-DCS-MIB MIB OID Command Syntax
Subnet Manager Agent Data Port OIDs
Understanding Performance Manager Agent OIDs
PMA Extended Port Counters Table OIDs
Understanding Gateway Specific OIDs
Understanding the SUN-ILOM-CONTROL-MIB MIB OIDs
SUN-ILOM-CONTROL-MIB MIB OID Command Syntax
Understanding the SUN-PLATFORM-MIB MIB OIDs
SUN-PLATFORM-MIB MIB OID Command Syntax
Understanding MIB Physical OIDs
Physical Class Extension Table OIDs
Sun Platform Sensor Table OIDs
Sun Platform Binary Sensor Table OIDs
Sun Platform Numeric Sensor Table OIDs
Discrete Sensor States Table OIDs
Understanding the ENTITY-MIB MIB OIDs
Each OID table has three columns of information. From left to right, the columns are:
Description of Task or Activity – The text under this heading describes what you want to do or information you want to see.
Action – The verbs under this heading describe the action respective to the SNMP client software interface. For example, a verb of read means to use the snmpget, snmpwalk, or snmptable command in the NetSNMP CLI client.
MIB OID – The string under this heading is the object identifier of the respective MIB that is used to accomplish the task or activity.
Note - The OID provided in the right column might not be complete. You might need to appended the OID with a .0 if the OID is a scalar OID or a .x (where x is 1 to a maximum value) if the OID is a tabular OID.
A table OID has a Table suffix, and the OIDs listed beneath it are most likely to be columns of that table.
An index OID has an Index suffix, and while the OID is not directly accessible, the OID is still used to return a specific row of a table OID.