About This Documentation (PDF and HTML)
Download Server System Tools and Drivers
Sun Fire X2270 M2 Server Installation Guide
Installation Overview and Preparation
Safety and Compliance Information
External Features and Components
Installing the Server Into a Rack With Optional Slide Rails
Optional Slide Rail Compatibility
How to Disassemble the Slide Rails Before Installation
How to Install the Mounting Brackets on the Server
How to Attach the Slide Rail Assemblies to the Rack
How to Install the Server Into the Slide Rail Assemblies
How to Verify the Operation of the Slide Rails
How to Remove the Server from the Rack
About Server Management Tool Options
Communicating With the ILOM and the System Console
Connecting Cables and Powering On to Standby-Power Mode
ILOM SP IP Address and the ILOM Interfaces
Connecting to the System Console
Setting Up Platform Operating System and Driver Software
Configuring the Factory--Installed Oracle Solaris 10 Operating System
The Oracle Solaris OS Installation Worksheet
Configuring the Factory-Installed Oracle Solaris 10 Operating System
Updating Supplemental Drivers and Firmware
Getting Started on the Oracle Solaris OS
Powering On and Powering Off the Server
Before You Begin
For an explanation of power modes, see Power Modes.
All operating systems have a shutdown procedure. This shutdown procedure provides a graceful shutdown of the OS, and it should be your first choice for powering off the server.
Caution - Potential data loss. Pressing and releasing the Power button causes Advanced Configuration and Power Interface (ACPI)–enabled operating systems to perform an orderly shutdown of the operating system. Servers not running ACPI-enabled operating systems perform an emergency shut down to standby-power mode. |
When the server is in standby-power mode, the Power OK LED on the front panel blinks, indicating that standby-power is still available.
Caution - In standby-power mode, power is still directed to some components. To completely power off the server, you must disconnect the AC power cords from the back panel of the server. |
Caution - Potential data loss. Pressing and holding the Power button for four seconds performs an immediate shutdown of the server. The system does not prompt for confirmation, nor are you allowed to save and exit open applications. |
See Also