About This Documentation (PDF and HTML)
Overview of the Sun Blade X6275 M2 Server Module
Server Module Front Panel and Indicators
Installing and Powering On the Server Module
About Your Server Module Shipment
Finding the Serial Number and Accessing Warranty Support Information
How to Install Your Server Module
How to Apply Full Power to a Server Module Node
How to Power Off a Server Module Node
Troubleshooting Server Power States
How to Display the ILOM IP Address Using the Web Interface
How to Display the ILOM IP Address Using the CLI
How to Log In to the ILOM Web Interface Using an Ethernet Connection
How to Log In to the ILOM CLI Using an Ethernet Connection
How to Log Into ILOM Using a Serial Connection
Configuring an ILOM IP Address
How to Configure a DHCP IP Address
How to Configure a Static IP Address
How to Connect to the Host's Serial Console Using the ILOM Command-Line Interface
How to Connect to the Host Console Using the ILOM Web Interface
Connecting to the host console through ILOM allows you to perform actions as if you were at the host. This can be useful when you need remote access to the server's BIOS setup program, or when you install an OS or other software on the server.
Choose one of the following methods:
Using the serial console through the ILOM command-line interface. See How to Connect to the Host's Serial Console Using the ILOM Command-Line Interface.
Using the remote console feature of the ILOM web interface. See How to Connect to the Host Console Using the ILOM Web Interface.