Test IPv4 or IPv6 Network Configuration From the Oracle ILOM CLI

1. At the CLI prompt, type the show command to view the network test targets and properties.

   For example, the following output shows the test target properties.

   -> show
   /SP/network/test
   Targets:
   
   Properties:
    ping = (Cannot show property)
    ping6 = (Cannot show property)
   
   Commands:
    cd
    set
    show

2. Use the set ping or set ping6 command to send a network test from the device to a network destination specified in the following table:

   Property Set Property Value Description ping set ping=<IPv4_address> Type the set ping= command at the command prompt followed by the IPv4 test destination address. For example:-> set ping=192.168.10.106 Ping of 192.168.10.106 succeeded ping6 set ping6= <IPv6_address> Type the set ping6= command followed by the IPv6 test destination address. For example:-> set ping6=2001::db8:5dff:febe:5000 Ping of 2001::db8:5dff:febe:5000 succeeded