Oracle Hardware Management Pack (HMP) provides a family of command-line interface (CLI) tools for managing your servers, and an SNMP monitoring agent.
You can use the Oracle Server CLI tools to configure Oracle servers. The CLI tools work with Oracle Solaris, Oracle Linux, Oracle VM, other variants of Linux, and Windows operating systems. They can be scripted to support multiple servers, as long as the servers are of the same type.
With the Hardware Management Agent SNMP Plugins, you can use SNMP to monitor Oracle servers and server modules from the operating system using a single host IP address. This prevents you from having to connect to two management points (Oracle ILOM and the host).
The Hardware Management Agent fetches and pushes information to and from Oracle ILOM. The SNMP Plugins provides an industry-standard SNMP user interface.
Use Oracle Linux Fault Management Architecture (FMA) host-based command-line interface to view and act on faults from the host operating system using fault management commands similar to those available from the Oracle ILOM Fault Management shell. The Oracle Linux FMA software is available starting with Oracle HMP 2.3 and supported for the Sun Server X4-8 running Oracle Linux 6.5 or later with system software 1.1.0 or later.
For more details on Oracle Hardware Management Pack, refer to: