The section describes how to run the installation program in the console mode:
Use the following steps to install Oracle Enterprise Repository using console mode:
This section describes the installation using the console mode on the UNIX platforms. Following sections describe the installation using:
Using the following steps to install Oracle Enterprise Repository using an installer with filename ending in .bin
:
.bin
, see Using Installers with Filenames Ending in .bin.Note: | Skip step 11 and step 12, choosing the shortcut location applies only to Windows systems. |
Using the following steps to install Oracle Enterprise Repository using an installer with filename ending in .jar:
.jar
, see Using Installers with Filenames Ending in .jar.Note: | Skip step 11 and step 12, choosing the shortcut location applies only to Windows systems. |
Caution: | Before running the installer, follow the preparation guidelines in Preparing for Your Installation, especially the Database Installation Procedures for your DBMS. |
To complete the console-mode installation process, respond to the prompts in each section by entering the number associated with your choice or by pressing Enter
to accept the default. To exit the installation process, enter exit
(or x
, for short) in response to any prompt. To review or change your selection, enter previous
(or p
, for short) at the prompt. To proceed to the following prompt, enter Next
(or n
, for short).
For Information on how to start the installation in the console mode, see Starting the Installation in Console Mode. When you start the installation in the console mode you will see a welcome screen as in Listing 5-1.
Note: | If the installation process is aborted before it is completed, manually clear the database before running the installer again. The installer does not clear data from the database when an installation is aborted. The existing data causes an error when the installer runs for the second time. |
<------------------Oracle Enterprise Repository 10.3 ------------------>
Welcome:
--------
This installer will guide you through the installation of Oracle
Enterprise Repository 10.3.
Prerequisites:
This installation works with the included Tomcat distribution, or with your
existing installation of Oracle WebLogic Server 10g, Tomcat 5.5.17/18, or IBM
WebSphere 6.1. A running and configured database is required. See
http://edocs.bea.com/oer/docs30/ for detailed database instructions.
Type "Next" or enter to proceed to the next prompt. If you want to change
data entered previously, type "Previous". You may quit the installer at any
time by typing "Exit".
Enter [Exit][Next]>
Next
(or n
for short) or press Enter
to continue with the installation process.The Oracle Home directory prompt is displayed.
1
or press Enter
.If there are no Oracle Home directories on your system, or you have selected to create a new Oracle Home, the installation program displays the prompt as in Listing 5-3:
<------------- Oracle Enterprise Repository 10.3 ------------->
Choose Oracle Home Directory:
--------------------------
->1* Create a new Oracle Home
2E:\oer
Enter index number to select OR [Exit][Previous][Next]>
<------------- Oracle Enterprise Repository 10.3 ------------->
Choose Oracle Home Directory:
--------------------------
"Oracle Home" = [Enter new value or use default "C:\Oracle"]
Enter new Oracle Home OR [Exit][Previous][Next]>
Next
(or n
for short), or press Enter
.Enter
.The installation program displays the Oracle Home directory you have specified, as shown in Listing 5-4:
<-------------------- Oracle Installer - Oracle Products ------------------->
Choose Oracle Home Directory:
--------------------------
"Oracle Home" = [C:\Oracle1]
Use above value or select another option:
1 - Enter new Oracle Home
2 - Change to default [C:\Oracle]
Enter option number to select OR [Exit][Previous][Next]>
Enter
to accept your selection. Otherwise, type 1
or 2
to return to the Choose Oracle Home Directory panel, where you can modify your entry. After you have selected your Oracle Home directory and confirmed your selection, type Next or press Enter. One of the following occurs:
<------------- Oracle Enterprise Repository 10.3 ------------->
Choose Install Type:
--------------------
Select the type of installation you wish to perform.
->1Default
This option will install Oracle Enterprise Repository, also suitable for
evaluation purposes. Install the following software: - Oracle
Enterprise Repository
Examples
2Custom
Choose additional software products and components to install.
Enter index number to select OR [Exit][Previous][Next]>
1
or press Enter to choose a Default
installation type. Proceed to step 8.2
to choose a Custom
installation type. The Choose Components to install prompt is displayed.For more information about complete and custom installations, see Installation Overview.
<------------- Oracle Enterprise Repository 10.3 ------------->
Choose Components to install:
-----------------------------
Release 3.0.0.0
+----Oracle Enterprise Repository [1] v
+----Core Repository with Examples [1.1] v
+----Oracle Enterprise Repository Plug-In for Eclipse [1.2] v
+----Process Engine [2.1] v
Enter number exactly as it appears in brackets to toggle selection OR [Exit][Previous][Next]>
The word Installed is shown in brackets for any components you have already installed on your system.
When you select or deselect components to install, the installation program checks for dependencies between components and automatically modifies the list of selected components. For example, if you deselect the Oracle BPM component, the Process Engine is also deselected.
When you have selected the components, press Enter
or type Next
(or n
for short). The Install Eclipse Options prompt is displayed (see Listing 5-7)
<------------- Oracle Enterprise Repository 10.3 ------------->
Install Eclipse Options:
------------------------
Install Oracle installer bundled Eclipse or use the existing Eclispe.
->1¦Install Workspace Studio
¦
¦ Installer will use the Oracle installer bundled
¦Eclipse kit and installs it to the default location.
2¦Use Existing Eclipse
¦
¦ Do not install the installer bundled Eclipse.
¦I will specify Eclipse Home to use.
Enter index number to select OR [Exit][Previous][Next]>
1
if you want to install Eclipse. Proceed to step 8.2
if you want to use an existing Eclipse installation. The Choose a Eclipse Home Directory prompt is displayed (see Listing 5-8)<------------- Oracle Enterprise Repository 10.3 ------------->
Choose a Eclipse Home directory:
--------------------------------
"Eclipse Home" = []
Enter new Eclipse Home OR [Exit][Next]>
n
. Verify the directory as shown in Listing 5-9.<------------- Oracle Enterprise Repository 10.3 ------------->
Choose a Eclipse Home directory:
--------------------------------
->1Yes, use this Eclipse Home [e:\myEclipse]
2No, select another Eclipse Home
Enter index number to select OR [Exit][Next]>
1
or n
to select the Eclipse Home directory and press Enter
.2
to select a different directory, press Enter
and return to Listing 5-8.Enter
.The Initialize Repository Properties prompt for the selected application server is displayed (for example, see Listing 5-11).
<------------- Oracle Enterprise Repository 10.3 ------------->
Choose Application Server:
--------------------------
Enterprise Repository supports deployment in the following application
servers.
*Select Application Server
1¦Tomcat 5.5.17/18 (user-supplied)
2¦WebLogic Server 10.3
3¦WebSphere 6.1
4¦Generic Application Server
Enter index number to select OR [Exit][Previous][Next]>
<------------- Oracle Enterprise Repository 10.3 ------------->
Initialize Repository Properties:
---------------------------------
Provide the required data to initialize Enterprise Repository.
1*Fully qualified server name:[app.example.com]
2*Port number:[7101]
3*Repository application name:[oer]
Enter index number to select OR [Exit][Previous][Next]>
n
.The Choose Product Installation Directories prompt is displayed (see Listing 5-12).
Enter
to proceed with the installation. Otherwise, do one of the following:1
and press Enter
to change the product installation directory for Oracle Enterprise Repository.2
and press Enter
to change the Process Engine directory.
Modify your entry, confirm it. Type Next
. Press Enter
.
<------------- Oracle Enterprise Repository 10.3 ------------->
Choose Product Installation Directories:
----------------------------------------
Oracle Home Directory: [E:\oer20_2]
Product Installation Directories:
1Default Product Home: [E:\oer20_2\repostoryXXX]
Enter index number to select OR [Exit][Previous][Next]>Enter option number to select OR [Exit][Previous][Next]> Next
The locations for Shortcut prompt is displayed (see Listing 5-13).
<------------- Oracle Enterprise Repository 10.3 ------------->
Choose Shortcut Location:
-------------------------
*The installer creates shortcuts to Oracle components, samples, and tools. As
*a user with administrative privileges, you can specify where these
*shortcuts are created.
->1"All Users" Start Menu folder (recommended)
For some installations, this setting may limit the automatic creation of
server shortcuts for users without administrative privileges. Refer to
the documentation for more information.
2Local user's Start Menu folder
Select this option if you need to ensure that other profiles registered on
this machine will not have access to these shortcuts.
Enter index number to select OR [Exit][Previous][Next]>
n
and press Enter
to confirm your choice for the location of the shortcut (see Listing 5-14).<------------- Oracle Enterprise Repository 10.3 ------------->
Choose Shortcut Location:
-------------------------
*Are you sure you wish to create the shortcuts in the selected location?
*
*"All Users" Start Menu folder (recommended)
*For some installations, this setting may limit the automatic creation of
*server shortcuts for users without administrative privileges. Refer to the *documentation for more information.
->1Yes.
2No, Go back to the previous screen and make another choice.
Enter index number to select OR [Exit][Previous][Next]>
Installation starts and you can see the progress of the installation at the prompt.
Note: | It is normal for the installation program to pause for a fairly long time. |
When the installation is complete, the Configure Repository Database panel is displayed (see Listing 5-15).
<------------- Oracle Enterprise Repository 10.3 ------------->
Configure Repository Database
->1 - Yes, configure the database now.
2 - No, do not configure the database now.
Enter a number or [Previous][Next]>
1
and press Enter
to configure a database.2
and press Enter
to configure a database later. Proceed to step 17.The Database Tablespace Names panel is displayed (see Listing 5-16).
<------------- Oracle Enterprise Repository 10.3 ------------->
Provide Database Tablespace Names:
----------------------------------
Provide the requested information about the tablespaces configured for use
by Enterprise Repository.
1¦BLOB tablespace: []
2¦Data tablespace: []
3¦Index tablespace: []
Enter index number to select OR [Exit][Previous][Next]>
n
.The Select Database Driver prompt is displayed (see Listing 5-17).
<------------- Oracle Enterprise Repository 10.3 ------------->
Select Database Driver:
-----------------------
Select a JDBC driver for your database from the supported drivers list.
->1¦Oracle
¦ [oracle.jdbc.driver.OracleDriver]
2¦IBM DB2 General Type 4 Driver
¦ [com.ibm.db2.jcc.DB2Driver]
3¦Microsoft SQL Server Driver 2005
¦ [com.microsoft.sqlserver.jdbc.SQLServerDriver]
Enter index number to select OR [Exit][Previous][Next]>
n
.The Configure Database Properties prompt is displayed (see Listing 5-18).
<------------- Oracle Enterprise Repository 10.3 ------------->
Configure the database properties below:
----------------------------------------
1¦Driver File Locations: []
2¦DBMS Name: []
3¦DBMS Host: [localhost]
4¦DBMS Port: [50000]
5¦User Name: []
6¦User Password: []
7¦Confirm Password: []
Enter index number to select OR [Exit][Previous][Next]>
n
.
After completing the installation process, complete the following post installation tasks, as described in Post-Installation Instructions.