PeopleSoft Enterprise Mobile Inventory Management 9.1 PeopleBook

Using Mobile Receiving

This chapter provides an overview of receiving stock in PeopleSoft Inventory using Mobile Inventory and discusses how to:

Set up the PeopleSoft system for use with Mobile Receiving.
Receive purchase order receipt lines using a mobile device.
Receive items by ad hoc receipt using a mobile device.

Understanding How to Receive Stock in PeopleSoft Inventory Using Mobile Receiving

The Mobile Receiving task flow integrates with the PeopleSoft Purchasing system to receive and put away received goods. Receiving rules are defined in the PeopleSoft system business processes leading up to the actual receipt. These processes include setting up items and creating requisitions and purchase orders. Mobile Receiving leverages this base information, and makes the process of receiving goods more efficient and accurate and moves data into the PeopleSoft system in real time.

Note. To make changes to a receipt after an item has been received, you need to use the PeopleSoft system online Receiving pages.

When stock arrives at the receiving location, you receive it using a mobile device with the Mobile Receiving task flow. You can receive inventory or non-inventory items, with or without associated purchase orders. Receipts with a purchase order can be for items that will be stocked in inventory or for items that will go directly to par locations or go directly to various departments. A receipt without a purchase order (ad hoc receipt) can be interfaced to the same products as a purchase order receipt. Only non-inventory items can be received without a purchase order.

The next diagram illustrates the flow of information through the Mobile Receiving process beginning with when the shipment arrives at the ship to location:

Process flow for Mobile Receiving

When a shipment arrives at the receiving location, it typically arrives with a bill of lading or packing slip. These documents can be used to gather information needed to record the receipt. Using a mobile device at the receiving location, you can input shipment information. You select items to be received. After selecting the items, you can create the receipt. The information is relayed back to the PeopleSoft system where you can perform the downstream receipt processes.

Note. Entering shipment information is optional.

You can also select to print delivery documents. Delivery information becomes available only after the item has been received. When you select to print delivery documents, the system uses the receipt information and initiates the RECV_DEL multi-process job. The job gathers receiving data for the Receipt Delivery Detail report.

See Using Mobile Delivery.

Simple and Advanced Selection of Items for Receipt

The difference between a simple and an advanced search for receipt items is the number of input fields that you can use. After you enter information in the selection fields, the rest of the search is the same. The search produces a list of purchase order lines and you select the lines to include in the receipt.

You use a simple search when the shipment is for one purchase order ID. You enter the purchase order ID and the mobile device displays a list of items for that purchase order that match the default ship to location and the due dates that are in the date range selection. You select the purchase order lines and schedules that are in the shipment and enter or adjust the quantity received.

An advanced search is used if you need to refine the selection criteria beyond just the purchase order and default ship to. Some examples include receiving a past due purchase order in which the due date is prior to the Days +/- field value.

Another example might be when a shipment includes items from multiple purchase orders. In this case you have several options. First, you can create one receipt for each purchase order using a simple search. Second, you can use the advanced selection to create a list of purchase order lines that you can receive in one shipment. To do this, you enter selection criteria to find matches in the shipment's purchase order lines.

A final example might be when a packing slip does not include the purchase order ID. In this case you can search for the purchase order by entering a vendor, manufacturing item ID and so on.

Purchase Order Receipts

To take advantage of the purchasing authorizations established during the requisition and purchasing process, goods and services that you receive need to be referenced against a purchase order. With Mobile Receiving, the purchase order must exist; however, lines and schedules might not be known by the person recording the receipt.

The system provides default receiving and purchase order business units, derived from User Preferences, but you can override the values. The Mobile Receiving application auto numbers the receipt number, but you can override the number. A component interface built on top of the Add/Update Receiving page processes the transaction from Mobile Receiving. Component interfaces for Mobile Receiving include MIN_PO_RECEIVING and MIN_RCPT_CNTR_SAVE.

See Understanding Mobile Inventory Management Setup in PeopleSoft.

The next diagram shows the flow for how a purchase order shipment is received and a receipt is created for the transaction and highlights the Mobile Receiving part of the flow:

Receipt with purchase order process flow

When a purchase order is defined and the shipment arrives at the receiving location, you use a mobile device to enter or scan the purchase order ID if the purchase order ID is bar coded on the packing slip. Upon reading the purchase order, the mobile device displays the purchase order receipt line information including the vendor item description ID and default quantity if it exists.

A setup option is available to control which item ID displays on the mobile page. You can select to display the item by:

Purchase order line item.
Vendor item.
Manufacturing item.

If your user preferences are set to provide a default purchase order quantity or quantity remaining for receiving, the mobile device displays the quantity for you. However, if your user preferences are set for blind receiving or not to provide default quantities, the system does not provide a quantity.

These user preferences are defined on the Receiver Setup page. To access the page, select: Set Up Financials/Supply Chain, Common Definitions, User Preferences Define User Preferences, click the Procurement link, and then the Receiver / RTV Setup link. Select the Blind Receiving Only check box to not display a quantity. Or, select the No Order Qty button to not display the purchase order quantity.

You can view additional details about individual items by clicking the Show link. Select the lines included in this receipt, enter or change the receipt quantity and save. When saving the receipt, you can trigger the RECV_DEL multi-process job to create the Receipt Delivery Detail report. Repeat the receiving process to receive more purchase order lines. After receiving the items, you can then use the mobile device with Mobile Delivery to complete the delivery verification of the items. When you save the receipt, the system provides you the option to close short purchase order lines that are being received.

Other processes that the system can trigger are based on user preferences, for example interface receipts and streamline subcontract. But, for this release we are not providing the ability to change these triggers and these triggers receive their default values from user preferences.

Note. You can add receipts for lot-controlled and serial-controlled items, device tracked items, and asset items, but you cannot enter values for the receipt until you access the PeopleSoft system's Receiving page to input the values after you save the mobile receipt.

Ad Hoc Receipts

Ad hoc receipts are receipts without a purchase order and provide you the capability to track a package from receipt to delivery. For example, if a salesperson ships samples to a doctor's office, a purchase order or accounts payable transaction is not generated, but the samples are received and delivered.

Another example might be when a department orders supplies using a credit card. Again, there is not a purchase order and an invoice is not sent to accounts payable. When these items arrive, the receipt needs to be recorded and the items delivered to the appropriate person or department.

Note. To use the ad hoc receipt transaction, ensure that the Change Non PO Receipt Price check box is selected on the Receive Setup page for your user preferences. To access the check box, select: Set Up Financials/Supply Chain, Common Definitions, User Preferences, Define User Preferences, click the Procurement link, and then click the Receiver / RTV Setup link.

The next diagram shows the flow for how you would receive an item and create an ad hoc receipt and highlights the part of the flow where you use Mobile Receiving:

Ad hoc receipt process flow

Using ad hoc receipts, you can provide basic information about the receipt, add multiple items to the receipt, and save the receipt into the PeopleSoft system, where you can review and update the receipt. The receipt is also available to a mobile device with Mobile Delivery to complete the delivery of the receipt items.

Setting Up the PeopleSoft System for Use with Mobile Receiving

This section discusses how to:

Establish Mobile Receiving installation options for purchase orders with receipts.
Establish Mobile Receiving installation options for ad hoc receipts.
Define user preferences for Mobile Receiving.
Define Mobile Receiving purchasing options.

Pages Used to Set Up the PeopleSoft System for Mobile Receiving

Page Name	Definition Name	Navigation	Usage
Installation Options - Mobile Inventory	INSTALLATION_MIN	Set Up Financials/Supply Chain, Install, Installation Options, and select either the Receiving PO or Receiving Ad Hoc task flow	Establish Mobile Receiving options for purchase orders with receipts. Establish Mobile Receiving options for ad hoc receipts. See Setting Up PeopleSoft Mobile Inventory Management.
User Preferences - Mobile Inventory	MIN_USER_TASK_OPT	Set Up Financials/Supply Chain, Common Definitions, User Preferences, Define User Preferences Inventory	Define user preferences for Mobile Receiving.
Mobile Receiving	BU_OPT_MOBILE_REC	Set Up Financials/Supply Chain, Business Unit Related, Purchasing, Purchasing Definition, and click the Mobile Receiving link	Establish Mobile Receiving Ad Hoc default values.

Establishing Mobile Receiving Installation Options for Purchase Orders with Receipts

Access the Installation Options - Mobile Inventory page (Set Up Financials/Supply Chain, Install, Installation Options, Mobile Inventory, and select the Receiving PO task flow).

You use installation options to define default values for Mobile Receiving pages in the PeopleSoft system and to control the behavior of the transaction.

Rows Displayed	Enter the maximum number of rows that you want to display in the tables for the Mobile Receiving application.
Display Item	Select the item ID value that you want to display for the receipt line when it is displayed in Mobile Receiving. Values include: Mfg Item ID PO Item ID Vendor Item ID The display value that you select will be the item ID displayed in the Mobile Receiving page. You can view the other item ID values by opening the Show table.
Display Lookups	Select this check box to display the Lookup icons for fields in this transaction. The Lookup icon enables you to view a list of values and select one.
Display Description	Select to display the item descriptions. Select to display the item descriptions. The description will always display for description only lines
Display Filter Related Fields	Select to display the Filter field and Filter button on the page. Deselect the check box to remove the filter functionality from the page.
Display Show/Hide in Tables	Select to display the Show and Hide icons in tables. Note. When you use the PeopleSoft system, values in a grid are equivalent to values in an Application Development Framework (ADF) table.
Print Delivery Report	Select to run a Delivery report when you create the receipt. The system initiates the RECV_DEL multi-process job in the same business event in the PeopleSoft system.
Set Select Checkbox	Select to set the default value for the Sel check box to selected when you access the Receiving - Receive Lines page.

Establishing Mobile Receiving Installation Options for Ad Hoc Receipts

Access the Installation Options - Mobile Inventory page (Set Up Financials/Supply Chain, Install, Installation Options, Mobile Inventory, and select the Receiving Ad Hoc task flow).

You use the installation options to define default values for Mobile Receiving pages in the PeopleSoft system and to define page values available on a mobile device.

Defining User Preferences for Mobile Receiving

Access the User Preferences - Mobile Inventory page (Set Up Financials/Supply Chain, Common Definitions, User Preferences, Define User Preferences, Mobile Inventory and select the Receiving PO task flow).

Note. Select the Receiving Ad Hoc task flow to define ad hoc receiving user preferences.

The User Preferences - Mobile Inventory: Receiving PO task flow and Receiving Ad Hoc task flow pages use the same values as the corresponding Installation - Mobile Inventory pages. When you are setting up user preferences, you can select the Use Installation Values check box to use installation values instead of defining user preferences. When you select the check box, user preferences values are not longer available.

Defining Mobile Receiving Purchasing Options

Access the Mobile Receiving page (Set Up Financials/Supply Chain, Business Unit Related, Purchasing, Purchasing Definition, and click the Mobile Receiving link).

You use this page to define default values that will be used by the Receiving Ad Hoc component.

Vendor ID	Select a vendor ID that will be used as the default value when creating an ad hoc receipt.
Category ID	Select an item category that will be used as the default value when creating an ad hoc receipt and the item ID is blank.
Unit of Measure	Select a unit of measure that will be used as the default value when creating an ad hoc receipt and the item ID is blank. The system uses the UNITS_TBL record to validate the unit of measure.

Receiving Purchase Order Receipt Items Using a Mobile Device

This section discusses how to:

Search for purchase order items to receive.
Select purchase order items to include in the receipt and input the quantity received.
Update purchase order receipt header information.
Confirm the creation of a purchase order receipt.

Pages Used to Receive Purchase Order Receipt Items Using a Mobile Device

Page Name	Navigation	Usage
Receiving Selection	Mobile Inventory, Receiving	Search for purchase order items to receive.
Receiving - Receive lines	Mobile Inventory, Receiving, and click the Lookup icon on the Receiving page	Select purchase order schedules to receive and define the quantity to receive.
Receiving - Header Details	Mobile Inventory, Receiving, and click the Header link on the Select Items page.	Update purchase order receipt header information
Receipt Created	Click the Add Item button on the Receive Item page	Confirm the creation of a receipt.

Searching for Purchase Order Items to Receive

Access the Receiving page (Mobile Inventory, Receiving).

When you access the Receiving page, the system provides default values from the PeopleSoft system Purchasing set up pages, including user preferences setup. To view all of the default settings, click the Selection Criteria and the Options links.

You can change the values which will become the default values on the mobile device until you exit the transaction. The changes that you make are only recognized by the receiving transaction and not recognized by other mobile transactions. The changes do not update the user preferences settings in the PeopleSoft system.

Unit	Displays the receiving business unit from the user's default business unit. You can change the business unit. The field is required.
Receiver	Enter the receipt number that you want to use to create the receipt. The system assigns the number when you save the receipt. The default value for the field is Next. You do not have to enter a number if you use the default value. The assigned number will be based on the autonumbering sequence defined in the PeopleSoft system for receipts. This field is required.
PO Unit (purchase order unit)	Enter a purchase order business unit. The system defaults the value from user preferences. You can also use the Receipts page in the PeopleSoft system to record the receipt.
Order ID	Enter the purchase order number or purchasing contract number. Entering a contract ID retrieves all of the purchase order schedules associated with the contract. If you enter a value in this field and tab out of the field, the system immediately initiates the search to find the purchase orders that matched the value. If there is at least one row that matches the search, the system displays the Receive Lines page.
Search	Click to initiate the search for an order ID. The system searches for a purchase order ID or purchase order IDs that have the entered contract ID on the purchase order schedule. The returned search displays the purchase order schedules that can be received. You can receive one or all of the schedules. The search results include the values that match the selection criteria. The values included in the Selection Criteria table are included when the search is triggered.
Selection Criteria	Click to expand the Selection Criteria table where you can define additional purchase order search criteria.
Options	Click to access the Options table where you can define processing options for purchase order item receipts.

Selection Criteria

Access the Selection Criteria table (click the Selection Criteria link on the Receiving page).

When you click the Selection Criteria link or the Expand button, you can view and update additional search criteria for purchase orders. Values in these fields are used to qualify the list of purchase orders.

Ship To	Enter the ship to location for the purchase order schedules. This field defaults from the User Preferences - Procurement setting for the Ship To Location field. You can override the value. The business unit and ship to unit do not need to have the same value.
Item	Enter an item ID to which you want to limit the purchase order search
Vendor	Enter a vendor short name to which you want to limit the purchase order search. When you perform the search, the system retrieves only those purchase orders for the vendor short name that you enter.
Mfg ID (manufacturer ID)	Enter a manufacturer's ID to limit the purchase order search results to only those purchase orders with that manufacturer's ID.
Mfg Item ID (manufacturer item ID)	Enter the manufacturer's item ID to limit the search to just that item ID for the manufacturer.
Days +/-	Enter the number of days plus or minus from the current date. The system searches for purchase orders that have a due date within this range of days. This value defaults from the Receiver Setup page in the User Preference - Receiver Setup component. You might need to change this value if an older purchase order is being received and the initial default value is too small so that the purchase order lines to be received do not appear. By increasing the number of days, you can find the lines and receive them. You enter a value to further restrict or expand the number of purchase order schedules that appear within the start date and end date range. This value is added or subtracted from the current date to calculate the start date and end date values. The default value appears from the User Preferences - Procurement: Receiver Setup page. You can also enter the start date and end date. The system selects all schedules with due dates that are on or within the two dates you enter.
Start Date and End Date	Enter the start and end days that are used as a comparison against the purchase order due date to determine which schedules to retrieve. If you change the start or end date values, the system does not change the Days +/- field value.
Reset to Dflt (reset to defaults)	Click to reset the Ship To and Days +/- field search values in the Selection Criteria table to the default values. The system also clears other input fields such as Item, Vendor, Vendor Item ID, Mfg ID and Mfg Item because these fields do not have default values.

Options

Access the Options table (click the Options link on the Receiving page).

Use this page to select processing options for receiving items.

Rows to Display	Enter the number of rows to display.
Display Item	Select how you want to display items in Receiving: Receive Lines page. You can display items by: PO Item ID: Select to display the list based on the PeopleSoft system ID for the purchase order item. Mfg Item (manufacturer item): Select to display the list based on the manufacturer's item ID. Vendor Item: Select to display the list based on the vendor's item ID.
Display Lookups	Select to display the Look Up icons.
Display Description	Select to display the item descriptions. The description will always display for description only lines.
Display Filter	Select to enable filtering on the Receiving: Select Items page. When selected, the Filter By field appears where you can limit the list of items based on character strings.
Display Show/Hide in tables	Select to display the Hide and Show links on the Receiving: Select Items page. You can expand and collapse additional item information tables using the links. Note. Depending on the mobile device and its view settings, the Show and Hide links might appear as Expand and Collapse icons. The Expand icon (right arrow) shows the additional information, while the Collapse icon (down arrow) hides the additional information.
Print Delivery Report	Click to run a Delivery report when you create the receipt. The system initiates the RECV_DEL multi-process job in the same business event in the PeopleSoft system.
Set Select Checkbox	Select to set the default value for the Sel check box to selected when you access the Receiving: Receive Lines page.
Run Close Short	Select to indicate that you want to include this receipt when the Close Short process is run. When you save the receipt and the Receipt Push process runs, the process calls the Close Short process to create the close short transactions for the purchase orders. This process is completed when you initiate the Close Short process.

Selecting Purchase Order Items to Receive

Access the Receiving - Receive Lines page (click the Look Up icon on the Receiving page).

The Receive Lines page provides a list of the purchase order items that met the purchase order search and selection criteria that you entered. Using the page you can select all or individual items to receive.

Note. You can select multiple purchase order lines to add to the receipt as long as the vendor is the same for each purchase order. You cannot select multiple purchase order lines if the vendors are different.

The business unit and the receipt number appear at the top of the page. If you did not assign a receipt number, Next appears in the header, and the system will assign the next receipt number when you save the receipt.

The system retrieves purchase orders lines that have open purchase order schedules. The search results are sorted in descending order by:

Purchase order business unit.
Purchase order ID.
Purchase order line.
Purchase order line schedule.

Filter By	Enter a value on which to search the list of purchase order items. You can reduce the list by entering a string of characters on which to search. For example, if you want to reduce the list by an item name, such as mask, enter the value and the system limits the list to just those items with mask in their description. The system searches these fields: PO Item ID Vendor Item ID Mfg ID Mfg Item ID Item Description PO ID Vendor Name Item Category Pro Number Packing Slip Invoice
Filter	Click to filter the list of items based on the value that you enter in the Filter By field.
Clear	Click to clear the filter results. After clearing the results, you can enter a new filter value.
Pro Number (progressive number)	Enter the tracking number assigned to the shipment in which the material arrived. The value entered will be assigned to each receipt line that has a blank pro number. The system does not replace the Pro number on receipt lines that already have a Pro number assigned to them. Note. If you enter a Pro number in the Header page, that value displays on this page.
Header	Click to view and maintain header information for the purchase order receipt. See Updating Purchase Order Receipt Header Information.
Expand	Click the Expand icon to show additional information about the receipt line. These options are available if you selected the Display Show/Hide in tables check box in the Options table. When you click to show additional line information, the item information appears depending on the value that you selected in the Display Item field for the Options table. For example, if the vendor item is displayed in the main table, then the purchase order item and the manufacturing item display in the table. Also, if any representations of the item ID are blank, the system does not display the field. For example if the manufacturing item ID is blank, the system does not display the Mfg Item ID field in the expanded table. Here is a list of item IDs that might display in the Show table: Vndr Item (vendor item): Displays the item ID that the vendor uses to track the item. The field appears empty if a vendor item doesn't exist. If you selected to display the search results by vendor ID, this information appears at the item level. PO Item ID: Displays the purchase order line's item ID. If you selected to display the search results by PO item ID, this information appears at the item level. Mfg Item (manufacturer item): Displays the manufacturer item ID if one exists. If you selected to display the search results by manufacturer ID, this information appears at the item level. Other fields that are displayed in the Show table include: PO ID (purchase order ID): Displays the purchase order, line number, and schedule using the defined separator (\) for Mobile Inventory Management. Due Dt (due date): Displays the requested due date. Pro Number: Enter the tracking number assigned to the shipment in which the material arrived. This progressive number appears by default from the receipt header if a Pro number value exists for the header. Packing Slip: Enter the packing slip ID for the received merchandise. The packing slip appears by default from the receipt header. Invoice: Enter the invoice ID assigned by the vendor. The invoice ID from the receipt header appears by default to the receipt lines
Collapse	Click the Collapse icon to hide additional information.
Sel	Click to select or deselect an individual item to add to the receipt. The initial default value of the check box depends on the Set Select Checkbox setting in the Options table. If the Set Select Checkbox check box is selected, the default value for the check box is selected. If the Set Select Checkbox check box is not selected, the default value for the Sel check box is deselected. If the Sel check box in the table is deselected and you enter or change the quantity, the system will select the Sel check box. You will not immediately see the change. When you refresh the page, the system selects the check box. Refreshes for the page happen when you: Click a button such as the Filter, Clear, View All or View Sel buttons. Click an icon such as Deselect All, Show, or Hide. The system deselects the Sel check box if you clear or change the item quantity to 0. Note. If you do not want to receive a specific line, you should manually deselect the Sel check box.
Item, Mfg Item (manufacturing item), andVndr Item (vendor item)	Displays the items that met the search criteria you entered. The column value depends on the value that you selected in the Display Item field in the Options table.
PO Item ID (purchase order item ID)	Displays the description associated with the purchase order line item.
Qty (quantity)	Enter the quantity delivered. A default value is based on user preferences values for blind receiving and receipt quantity options. The unit of measure appears with the quantity.
UOM (unit of measure)	Displays the purchase order line's unit of measure.
Save	Click to receive the items that you selected on this page. When you save the selections, the system performs similar logic as it does for the PeopleSoft system's online Receiving page to process the receipt. If the save is successful, the system displays the receipt number that it generated. See Receiving Shipments. Note. If an error prevents the receipt from saving, the system provides an error message with information about the error. When an error occurs, the Receive Lines page displays only the lines that are being received. Lines with the Sel check box deselected will not be displayed. You can use the View All button to see all lines for the original selection. See Confirming the Creation of a Purchase Order Receipt.

Select All	Click to select all of the items in the list. The system places a check mark in the Sel check box for each item. The system adds these items to the receipt when you click the Save button.
Deselect All	Click to deselect all of the items in the list. The system removes the check mark from the Sel check box.
Return to Add	Click to access the Receiving PO page. When you click the link, you are indicating that you want to cancel the current receipt and start over with a new receipt. The system provides a warning message for you to save any changes that you made to the receipt. Click the Continue button to proceed to the Receiving PO page without saving changes. Click the Return button to return to the Receiving PO selection page.
View Sel (view selected) View All	Click the View Sel button to display the receipt rows that have been selected to be received. Click the View All button to view all rows from the original purchase order line selections. When you click either button, the system toggles to the other button. For example, when you initially access the Receiving PO selection page, the system displays all purchase order rows and makes the View Sel button available. Then, after selecting or deselecting rows to include on the receipt, you can click the View Sel button to display just the rows that you've selected. When you access the list, the system displays the View All button that you can click to return to the original list. This feature is useful when the purchase order receiving quantity option is set to blind receiving or there is not a default quantity. In this case, as you enter receipt quantities, the system selects the Sel check box for you, and because that selection isn't immediate, you can use the View Sel button to view the selected rows immediately.

Updating Purchase Order Receipt Header Information

Access the Header Details page (click the Header link on the Receiving - Select Items page).

Use this page to view or define shipping information for the purchase order receipt.

Carrier	Select the freight carrier that delivered the shipment. To locate a carrier, click the Look Up icon.
Pro Number (progressive number)	Enter the tracking number assigned to the shipment in which the material arrived. When you add the number and click the OK button, the system updates the Pro Number field on the Receiving - Select Items page and also updates the Pro number for all receipt lines with a blank Pro number.
Packing Slip	Enter the packing slip. This value is typically listed on the packing slip provided by the supplier.
Invoice	Enter the invoice ID. If this receipt is processed through a vendor's Evaluated Receipts Settlement process, this field value may be the same as the Packing Slip field value.
OK	The system applies the Pro number, packing slip, and invoice values to all receipt lines that have a blank value.
Cancel	Click to cancel any changes that you made to this page and return to the Receiving - Select Items page.

Confirming the Creation of a Purchase Order Receipt

Access the Receipt created page (click the Save button on the Receiving - Select Items page).

The system displays this page after you successfully create a purchase order receipt. The information includes the business unit in which the receipt was created and the receipt number. You can now access the receipt information using the PeopleSoft system. Receipts created using Mobile Receiving and Receiving Ad Hoc will have a Receive Source field value of Mobile on the Receiving - Header Details page in the PeopleSoft system. Click the OK button to access the Receiving page. The system clears the previous receipt information and enables you to create another receipt.

Note. If an error prevents the receipt from saving, the system provides an error message with information about the error. When an error is encountered the system displays the error and the Receive Lines page will display only the lines that are being received. All the lines with the Sel check box deselected will not be display.

Also, the system suppresses some warning messages, such as early receipts. Warning messages that are suppressed by the system are not displayed and are not errors, and do not prevent the creation of the receipt.

If user preferences have been define for additional processing of the receipt, the system triggers the additional processes. These include:

Process receipts will be triggered if user preferences value Interface receipts is selected.
If the Run Close Short check box is selected the Close Short process will run when the Process Receipts process is run.
If a receipt line is an inventory item then items will be putaway based on the inventory putaway rules defined.
Streamline subcontract will be triggered if the user preferences value is selected.

To enter serial, lot, device tracking, or asset information, you must use the online PeopleSoft system Receiving page. You can also maintain receipt rejection information in the PeopleSoft system Receipt Lines page - More Details tab.

Receiving Items by Ad Hoc Receipt Using a Mobile Device

This section discusses how to:

Define information for ad hoc receipts.
Select items to receive using ad hoc receipts.
Update ad hoc receipt header information.
Confirm ad hoc receipt creation.

Pages Used to Receive Items by Ad Hoc Receipt on a Mobile Device

Page Name	Navigation	Usage
Receiving Ad Hoc	Mobile Inventory, Receiving Ad Hoc	Define information for ad hoc receipts.
Receiving Ad Hoc - Receive Items	Mobile Inventory, Receiving Ad Hoc, and click the Add button	Select items to receive using ad hoc receipts.
Receiving Ad Hoc - Header Details	Mobile Inventory, Receiving Ad Hoc, click the Add button, and click the Header link.	Update ad hoc receipt header information.
Receipt Created	Click the Save button on the Receiving Ad Hoc page.	Confirm receipt creation.

Defining Information for Ad Hoc Receipts

Access the Receiving Ad Hoc page (Mobile Inventory, Receiving Ad Hoc).

Use this page to define basic information about an ad hoc receipt and to establish processing options for ad hoc receiving.

Note. To use this transaction, ensure that the Change Non PO Receipt Price check box is selected on the Receive Setup page for your user preferences. To access the check box, select: Set Up Financials/Supply Chain, Common Definitions, User Preferences, Define User Preferences, click the Procurement link, and then click the Receiver / RTV Setup link.

Note. The Receipt Accrual process does not include ad hoc receipts in its processing because the Receipt Accrual skips these receipts.

Unit	Displays the user's default business unit. You can change the business unit. A business unit is required.
Receiver	Enter the receipt number that you want to use to create the ad hoc receipt. The system assigns the number when you save the receipt. The default value for the field is Next. You do not have to enter a number if you use the default value. The number is based on the autonumbering sequence defined in the PeopleSoft system for receipts. This field is required.
Vendor	Enter the vendor short name from whom the shipment was received. The default value for the field is based on the business unit's default vendor for Mobile Receiving Ad Hoc. The field is required.
Carrier	Enter the freight carrier that delivered the shipment.
Ship To	Enter the ship to location. The default value from user preferences initially appears in the field. You can override the value. The field is required.
Add	Click to add items to receive using this ad hoc receipt. For more information, see "Selecting Items to Receive Using Ad Hoc Receipts." See Selecting Items to Receive Using Ad Hoc Receipts.

Options

Access the Options table (click the Options link on the Receiving Ad Hoc page).

Use this page to select processing options for ad hoc receiving items.

Rows to Display	Enter the number of rows to display on the Receiving Ad Hoc - Receive Item page.
Display Lookups	Select to display the Lookup icons used for ad hoc receiving searches.
Display Description	Select to display the item descriptions. The description will always display for description only lines.
Display Show/Hide in tables	Select to display the Hide and Show links on the Receiving Ad Hoc - Receive Item page. You can expand and collapse additional item information tables using the links.
Print Delivery Report	Select to run a Delivery report when you create the receipt. The system initiates the RECV_DEL multi-process job in the same business event in the PeopleSoft system.

Selecting Items to Receive Using Ad Hoc Receipts

Access the Receiving Ad Hoc - Receive Item page (Mobile Inventory, Receiving Ad Hoc, and click the Add button).

You use this page to enter items for receipt. The page displays the business unit and either the receipt ID that you entered or Next, indicating the system assigns a receipt ID when you save the mobile transaction.

When you click the Add Item button, the system adds the item and the quantity to receive in the lower section of the page. You can change the quantity and unit of measure in the section. For description only lines, the unit of measure and item category defaults from the purchase order business unit Mobile Receiving page fields.

You can also expand the Show icon to view additional information about receipt lines. The values in Show information table can vary depending on the Options settings for ad hoc receiving. You can view additional receipt line information if the Display Hide/Show in table check box is selected in the search options.

You can change the quantity of the item to receive and use the Delete button to remove the item from the ad hoc receipt. As you add items to the list, the most recent item appears at the top of the table list.

Click the Add Item button to continue adding items to the receipt. Each item that you add creates a new receipt line. When you finish adding items to the receipt, click the Save button. The system creates the new ad hoc receipt and updates the PeopleSoft system with the information.

Pro Number (progressive number)	Enter the tracking number assigned to the shipment in which the material arrived.
Attn To (attention to)	Enter the person to whom, and/or place to where the services or goods are to be delivered. The system adds the value that you enter to the RECV_LN_DISTRIB record.
Location	Enter a location to indicate where the item is to be delivered. If a default value exists for the field, you can override the value. The Location field is required.
Item	Enter the item ID that you are receiving. You must enter either an item ID or an item description. The item will be added to the receipt as a receipt line. If you enter the item ID, the system populates the Descr field with the item's description and the UOM with the item's standard UOM.
Descr (description)	Enter a value that describes the item being received. If an item is entered, the system provides the default value for the item's description. You cannot change the description. If you do not enter an item, the Descr field is required so you must enter a description. When you enter an item the system does not immediately display the item's description. After you click the Add Item button, the system adds the item to the table and the item description appears with the item.
Qty (quantity)	Enter the quantity of the item that you are receiving for this ad hoc receipt line. The Qty field is required. When you enter a quantity and tab out of the field, the system triggers the Add Item functionality.
Add Item	Click to add an item to a list of items that are being received. The most recent item that you add appears at the top of the list of items and the cursor is placed on the Pro Number field. For the Receiving Ad Hoc - Receive Item page, the Save button, Header link, and Return to Search link appear at the top of the table. When there are two or more rows, these fields appear at the top and at the bottom of the table.

After you enter an item description, and click the Add Item button, the system updates the page as shown in this example:

Header

Click to update receipt header information.

See Updating Ad Hoc Receipt Header Information.

Return to Add

Click to access the Receiving Ad Hoc - Add page where you can begin another receipt. You will receive a warning message if you click this button prior to saving the receipt you are processing.

Qty (quantity)

Enter the quantity of the item that you are receiving. The unit of measure appears with the quantity. You can change the unit of measure.

(Delete icon)

Click to delete an item from the table list. The system removes the item and refreshes the list.

Updating Ad Hoc Receipt Header Information

Access the Receiving Ad Hoc - Header Details page (click the Header link on the Receiving Ad Hoc page.)

Use this page to view or define header information for an ad hoc receipt.

Carrier	Enter the freight carrier that delivered the shipment.
Pro Number (progressive number)	Enter the tracking number assigned to the shipment in which the material arrived. When you add the number and click the OK button, the system updates the Pro Number field on the Receiving Ad Hoc - Receive Item page and also updates the Pro number for all receipt lines with a blank Pro number
Packing Slip	Enter the packing slip. This value is typically listed on the packing slip provided by the supplier.

Confirming Ad Hoc Receipt Creation

Access the Receipt Created page (click the Add Item button on the Receive Item page).

The system displays this page after you successfully create ad hoc receipts. The information includes the business unit in which the receipt was created and the receipt number. You can now access the receipt information using the PeopleSoft system.

Click the OK button to access the Receiving Ad Hoc page, where you can add another ad hoc receipt.

Receipts that you create using Mobile Receiving and Receiving Ad Hoc components will have a Receive Source field value of Mobile. Also, if you selected the Print Delivery Flag check box, when you save the receipt, the system triggers the Print Delivery process, RECV_DEL multi-process job.

Header	Click to update receipt header information. See Updating Ad Hoc Receipt Header Information.
Return to Add	Click to access the Receiving Ad Hoc - Add page where you can begin another receipt. You will receive a warning message if you click this button prior to saving the receipt you are processing.
Qty (quantity)	Enter the quantity of the item that you are receiving. The unit of measure appears with the quantity. You can change the unit of measure.
(Delete icon)	Click to delete an item from the table list. The system removes the item and refreshes the list.