- SCSI HBA driver for LSI MegaRAID 320-2x SCSI RAID Controller
The lsimega SCSI RAID host bus adapter driver is a SCSA-compliant nexus driver that supports LSI MegaRAID 320-2x SCSI RAID devices.
The lsimega driver supports standard functions provided by the SCSA interface, including RAID disk I/O and passthrough I/O to support SCSI tape and CDROM.
The lsimega.conf file contains no user configurable parameters. Please configure your hardware through BIOS.
The LSI MegaRAID 320-2x device can support up to 40 logic drivers. Note that BIOS numbers the logic drives as 1 through 40, however in Solaris these drives are numbered from 0 to 39.
See attributes(5) for a description of the following attributes:
32-bit ELF kernel module.
64–bit kernel module (x86 only).
Driver configuration file (contains no user-configurable options).
Small Computer System Interface-2 (SCSI-2)