2. Fibre Channel Configuration Overview
3. Administering Multipathing Devices Through mpathadm Commands
4. Configuring Multipathing Software
7. Configuring IPFC SAN Devices
8. Solaris 10 10/08 x86/x64 Fibre Channel Operating System Booting Procedure
9. Persistent Binding for Tape Devices
A. Manual Configuration for Fabric-Connected Devices
Fabric Device Node Configuration
Ensuring That LUN Level Information Is Visible
To Ensure LUN Level Information is Visible
To Detect Fabric Devices Visible on a Host
Configuring Device Nodes Without Multipathing Enabled
To Configure an Individual Device Without Multipathing
To Configure Multiple Devices Without Multipathing
Configuring Device Nodes With Solaris Multipathing Software Enabled
To Configure Individual Devices With Sun StorageTek Traffic Manager Software
To Configure Multiple Devices With Multipathing
To Unconfigure a Fabric Device
To Unconfigure One Path to a Multipathing Device
To Unconfigure All Fabric-Connected Devices With Multipathing Enabled
This procedure describes how to unconfigure all configured fabric devices that are attached to a fabric-connected host port.
Only devices on a fabric-connected host port can be unconfigured.
# cfgadm -al Ap_Id Type Receptacle Occupant Condition c0 fc-fabric connected configured unknown c0::50020f2300006077 disk connected configured unknown c0::50020f23000063a9 disk connected configured unknown c1 fc-private connected configured unknown c1::220203708b69c32b disk connected configured unknown c1::220203708ba7d832 disk connected configured unknown
If the device is under any volume manager’s control, see the documentation for your volume manager before unconfiguring the device.
# cfgadm -c unconfigure c0
Note - This operation repeats the unconfigure operation of an individual device for all the devices on c0. This process can be time-consuming if the number of devices on c0 is large.
# cfgadm -al Ap_Id Type Receptacle Occupant Condition c0 fc-fabric connected unconfigured unknown c0::50020f2300006077 disk connected unconfigured unknown c0::50020f23000063a9 disk connected unconfigured unknown c1 fc-private connected configured unknown c1::220203708b69c32b disk connected configured unknown c1::220203708ba7d832 disk connected configured unknown
Notice that the Occupant column of c0 and all the fabric devices attached to it are displayed as unconfigured.