|
| savecmdsync.1m | command synchronization command |
| setbus.1m | perform dynamic bus reconfiguration on active expanders in a domain |
| setcsn.1m | set the chassis serial number for a Sun Fire high-end system |
| setdatasync.1m | modify the data propagation list used in data synchronization |
| setdate.1m | set the date and time for the system controller (SC) or a domain |
| setdefaults.1m | remove all instances of a previously active domain and reset Capacity on Demand (COD) information |
| setfailover.1m | modify the state of the system controller (SC) failover mechanism |
| setkeyswitch.1m | change the position of the virtual keyswitch |
| setobpparams.1m | set up OpenBoot PROM variables for a domain |
| setupplatform.1m | set up the available component list and Capacity on Demand (COD) resources used for domains |
| showboards.1m | show the assignment information and status of the boards |
| showbus.1m | display the bus configuration of expanders in active domains |
| showcmdsync.1m | display the current command synchronization list |
| showcodlicense.1m | display the current Capacity on Demand (COD) right-to-use (RTU) licenses stored in the COD license database |
| showcodusage.1m | display the current usage statistics for Capacity on Demand (COD) resources |
| showcomponent.1m | display the blacklist status for a component |
| showdatasync.1m | display the status of system controller (SC) data synchronization for failover |
| showdate.1m | display the date and time for the system controller (SC) or a domain |
| showdevices.1m | display system board devices and resource usage information |
| showfailover.1m | display system controller (SC) failover status or role |
| showkeyswitch.1m | display the position of the virtual keyswitch |
| showlogs.1m | display message log files or the event logs. |
| showobpparams.1m | display OpenBoot PROM bring up parameters for a domain |
| showplatform.1m | display the board available component list, the domain state for each domain, and Capacity on Demand (COD) information. |
| showxirstate.1m | display CPU dump information only after a reset pulse has been sent to the processors |
| smsbackup.1m | back up the SMS environment |
| smsconfig.1m | configures the SMS environment |
| smsconnectsc.1m | accesses a remote SC console |
| smsinstall.1m | install the SMS environment |
| smsrestore.1m | restore the SMS environment |
| smsupgrade.1m | upgrades the SMS software to the current version |
| smsversion.1m | change the active version of SMS to another co-resident version of the SMS software |
| ssd.1m | SMS startup daemon |