test

Sun Enterprise 220R Server Service Manual

5.1.2 What to Do

  1. Disconnect the I/O power cable from the UltraSCSI backplane at connector J0101.

    See Step 4 for the location of the UltraSCSI backplane in the system.

    Graphic

  2. Disconnect the UltraSCSI data cable from the UltraSCSI backplane at connector J0102.

    Press the levers on the sides of the backplane connector.

  3. Disconnect the removable media SCSI cable from the UltraSCSI backplane at connector J0302.

  4. Remove the two Phillips screws that secure the UltraSCSI backplane to the chassis.

    Graphic

  5. Remove the backplane from the chassis.

    Place the backplane on an antistatic mat.