test

Sun Enterprise 3500 System Reference Manual

Fan Tray Assembly

Removing the Fan Tray Assembly

  1. Pull open the front door of the Enterprise 3500 system.

  2. Locate the fan tray assembly at the bottom of the system.

  3. Loosen the three captive screws securing the fan tray assembly in the chassis. See Figure E-1.

    Figure E-1 Removing the Fan Tray Assembly

    Graphic

  4. Gently pull the fan tray assembly from the chassis and set it aside.

Replacing the Fan Tray Assembly

  1. Carefully insert the fan tray assembly in the Enterprise 3500 system. See Figure E-1.

    Caution - Caution -

    DO NOT FORCE the fan tray assembly into the slot; this can cause damage to the fan tray assembly and system.

    The fan tray assembly should insert and seat smoothly. If it binds, remove it, and inspect the slot for any obvious obstructions. Do not damage the springfingers at the bottom of the fan tray assembly.

  2. Tighten the three captive screws securing the fan tray assembly to the chassis.

  3. Close the front door of the Enterprise 3500 system.