- Document Information
- Preface
- 1. Introduction to the Sun Fire X4600/X4600 M2 Servers
- 2. Powering On and Configuring BIOS Settings
- 2.1 Powering On the Server
- 2.2 Powering Off the Server
- 2.3 Configuring BIOS Settings
- 2.3.1 The System Console
- 2.3.2 Navigating the BIOS Setup Screens
- 2.3.3 BIOS Considerations
- 2.3.4 Descriptions of the BIOS Setup Utility Screens
- 2.3.5 BIOS Setup Utility Menu Screens
- 2.3.5.1 BIOS Main Menu Screen
- 2.3.5.2 BIOS Advanced Menu, Main Screen
- 2.3.5.3 BIOS Advanced Menu, CPU Configuration Screen
- 2.3.5.4 BIOS Advanced Menu, IDE Configuration Screen
- 2.3.5.5 BIOS Advanced Menu, SuperIO Chipset Configuration Screen
- 2.3.5.6 BIOS Advanced Menu, ACPI Configuration Screen
- 2.3.5.7 BIOS Advanced Menu, Advanced ACPI Configuration Screen
- 2.3.5.8 BIOS Advanced Menu, Event Logging Details Screen
- 2.3.5.9 BIOS Advanced Menu, HyperTransport Configuration Screen
- 2.3.5.10 BIOS Advanced Menu, IPMI 2.0 Configuration Screen
- 2.3.5.11 BIOS Advanced Menu, IPMI 2.0, View BMC Event Log Screen
- 2.3.5.12 BIOS Advanced Menu, IPMI 2.0, LAN Configuration Screen
- 2.3.5.13 BIOS Advanced Menu, IPMI 2.0, PEF Configuration Screen
- 2.3.5.14 BIOS Advanced Menu, MPS Configuration Screen
- 2.3.5.15 BIOS Advanced Menu, PCI Express Configuration Screen
- 2.3.5.16 BIOS Advanced Menu, Remote Access Configuration Screen
- 2.3.5.17 BIOS Advanced Menu, USB Configuration Screen
- 2.3.5.18 BIOS PCI/PnP Menu
- 2.3.5.19 BIOS Boot Menu, Main Screen
- 2.3.5.20 BIOS Boot Menu, Boot Settings Configuration Screen
- 2.3.5.21 BIOS Boot Menu, Boot Device Priority Screen
- 2.3.5.22 BIOS Boot Menu, Hard Disk Drives Screen
- 2.3.5.23 BIOS Boot Menu, Removable Drives Screen
- 2.3.5.24 BIOS Boot Menu, CD/DVD Drives Screen
- 2.3.5.25 BIOS Security Settings Menu
- 2.3.5.26 BIOS Chipset Menu, Main Screen
- 2.3.5.27 BIOS Chipset Menu, NorthBridge Configuration Screen
- 2.3.5.28 BIOS Chipset Menu, NorthBridge Memory Configuration Screen
- 2.3.5.29 BIOS Chipset Menu, NorthBridge ECC Configuration Screen
- 2.3.5.30 BIOS Chipset Menu, SouthBridge Configuration Screen
- 2.3.5.31 BIOS Exit Options Menu Screen
- 2.4 Resetting SP and BIOS Passwords Using Jumper P20
- 2.5 Using the Force-Recovery Jumper P19
- 2.6 Using the Clear CMOS Jumper P25
- 2.7 Using the Reset and NMI Dump Switches
- 2.8 Updating the BIOS
- 2.9 Power-On Self-Test (POST)
- 2.10 BIOS ILOM-based Diagnostics
- 3. Maintaining the Sun Fire X4600/X4600 M2 Servers
- 3.1 Tools and Supplies Needed
- 3.2 Powering Off and Removing the Covers
- 3.3 Replaceable Component Locations
- 3.4 Replaceable Component Procedures
- 3.5 Replacing a Power Supply
- A. System Specifications
- B. BIOS POST Codes
- C. LEDs and Jumpers
- D. Connector Pinouts
- D.1 USB Connector
- D.2 Serial Connector
- D.3 10/100BASE-T Connector
- D.4 10/100/1000BASE-T Connector
- D.5 VGA Video Connector
- D.6 Serial Attached SCSI Connector
- D.7 Flex Cable Motherboard Connector
- D.8 Flex Cable Power Distribution Board Connector
- D.9 Flex Cable DVD-ROM Drive Connector
- D.10 Flex Cable HDD Backplane Connector
- D.11 Motherboard Bus Bar Power Connectors
- D.12 Front Flex Cable to Front I/O Board Connector
- D.13 Front Flex Cable to Motherboard Connector
- D.14 Power Supply Connector
- D.15 Fan Module Connector
- E. Serial Attached SCSI BIOS Configuration Utility
- E.1 Fusion-MPT SAS BIOS Overview
- E.2 Starting the SAS BIOS Configuration Utility
- E.3 Configuration Utility Screens
- E.3.1 User Input Keys
- E.3.2 Adapter List Screen
- E.3.3 Global Properties Screen
- E.3.4 Adapter Properties Screen
- E.3.5 SAS Topology Screen
- E.3.6 Device Properties Screen
- E.3.7 Device Verify Screen
- E.3.8 Advanced Adapter Properties Screen
- E.3.9 Advanced Device Properties Screen
- E.3.10 PHY Properties Screen
- E.3.11 Integrated RAID Configuration and Management Screens
- E.4 Performing RAID Configuration Tasks
- E.4.1 RAID Implementation and Support
- E.4.1.1 Automatic Data Resynchronization and Hot Spares
- E.4.1.2 RAID Level Support
- E.4.1.3 RAID Volume Support
- E.4.1.4 RAID Combination Support
- Creating a RAID 0 Volume
- Creating a RAID 1 Volume
- Creating a Second RAID Volume
- Viewing RAID Volume Properties
- Adding Hot Spares
- Deleting Hot Spares
- Synchronizing an Array
- Activating an Array
- Deleting an Array
- E.4.2 Locating a Disk Drive
- E.4.1 RAID Implementation and Support
- F. CPU Modules and Memory DIMMs
- G. Power Supplies
- Index
Sun Fire X4600 and Sun Fire X4600 M2 Servers Service Manual
March 2011, Revision 01
This Sun Fire X4600 and Sun Fire X4600 M2 Servers Service Manual contains information and procedures for maintaining and upgrading the Sun Fire X4600 server, and Sun Fire X4600 M2 server, including the system BIOS.
