Figures

FIGURE 1-1 Front Panel Components

FIGURE 1-2 Back Panel Components

FIGURE 1-3 Internal System Components

FIGURE 1-4 Power Supply and Component Cable Connections to Motherboard

FIGURE 1-5 Internal Component Cables and Connections

FIGURE 2-1 External Cable Connections

FIGURE 2-2 Connecting the Monitor to the System Image

FIGURE 5-1 Removing the Side Access Panel

FIGURE 5-2 Removing the Front Bezel

FIGURE 5-3 Installing the Front Bezel

FIGURE 5-4 Installing the Left Side Access Panel

FIGURE 5-5 Removing a Hard Drive

FIGURE 5-6 Installing a Hard Drive

FIGURE 5-7 Installing a SAS Card

FIGURE 5-8 Location of the Storage Backplane

FIGURE 5-9 Removing the Storage Backplane

FIGURE 5-10 Installing the Storage Backplane

FIGURE 5-11 Location of DVD Cables.

FIGURE 5-12 Removing the DVD Drive

FIGURE 5-13 Installing the DVD Drive

FIGURE 5-14 Removing a DIMM

FIGURE 5-15 Installing a DIMM

FIGURE 5-16 Removing a PCIe Graphics Card

FIGURE 5-17 Installing a PCIe Graphics Card

FIGURE 5-18 Removing a PCI Card

FIGURE 5-19 Installing a PCI card

FIGURE 5-20 Removing the System Battery

FIGURE 5-21 Installing a System Battery

FIGURE 5-22 Removing the System Fan

FIGURE 5-23 Installing the System Fan

FIGURE 5-24 Location of the Power Supply

FIGURE 5-25 Removing the Power Supply From the Chassis

FIGURE 5-26 Installing the Power Supply in the Chassis

FIGURE 5-27 Removing the I/O Board Assembly

FIGURE 5-28 Installing the I/O Board Assembly

FIGURE 5-29 Unlatching the Heatsink-Fan Assembly

FIGURE 5-30 Removing the CPU From the Workstation

FIGURE 5-31 Installing the CPU

FIGURE 5-32 Installing the Heatsink-Fan Assembly

FIGURE 5-33 Securing the Heatsink/Fan Assembly Latches

FIGURE 5-34 Removing the Nine Motherboard Screws

FIGURE 5-35 The Four Bracket Mounting Holes on the Backside of the Motherboard

FIGURE 5-36 Installing the Mounting Bracket on to the Backside of the Motherboard

FIGURE 5-37 Installing the Motherboard

FIGURE 5-38 The Location of J25

FIGURE 5-39 Jumper J25 with Cap on pins 2 and 3

FIGURE 5-40 Jumper 25 with Cap Moved Back to Pins 1 and 2

FIGURE B-1 Location of Port 80 LED