test

Sun Ultra 27 Workstation Installation Guide

ProcedureTo Configure Windows for Multiple Monitors

  1. Connect your second monitor to the free graphics card DVI connector at the back of the workstation.

    Note –

    These instructions assume your workstation uses an NVIDIA graphics card with multiple output ports. If you use some other kind of graphics card, be sure to obtain the latest device driver for it. For more on installing Windows device drivers, see the Sun Ultra 27 Workstation Windows Installation Guide.

  2. Log in to the workstation.

    Note –

    You should have already installed a supported version of the Windows operating system including installing the Sun-supplied supplemental software, see the Sun Ultra 27 Workstation Windows Installation Guide.

  3. Open the NVIDIA Control Panel from the system tray, and click Run multiple display wizard under Display to enable and customize your multi-display setup.

  4. Adjust the parameters as appropriate.

    A second reboot might be necessary for the system to see both screens.