How To Access the System Console Remotely Using the ILOM CLI

The ILOM allows you to log on to the CLI remotely, using as SSH session.

Before You Begin

The ILOM must be running and connected to the same network as your terminal. Also, you must know the ILOM's IP address, username, and password.

1. Establish an SSH connection using the following command, and then enter the default password (changeme) when you are prompted:

   # ssh —l root sp_ip_address

   changeme

   After you have successfully logged in, the SP displays its default command prompt:

   ->

2. To power on the system, type the command: start /SYS.

   You can also power the system on or off using a stylus or button, as described inPowering the Server On and Off in Sun Fire X4800 Server Installation Guide.

3. To start the system console, type: start /SP/console
4. To exit the system console and return to the ILOM CLI, press Esc-Shift-9.