Exit Print View | |
Sun Integrated Lights Out Manager (ILOM) 3.0 Supplement for the Sun Netra T6340 Server Module |
![]() |
Documentation, Support, and Training
Understanding ILOM for the Sun Netra T6340 Server Module
Chassis Monitoring Module Features
Resetting the Password to the Factory Default
Viewing and Configuring Host Control Information
Managing Host Diagnostics and POST
Managing System User Interactions
Managing the Service Processor
Changing Service Processor Settings to Factory Defaults
Change Console Escape Characters (CLI)
Changing Configuration Policy Settings
Managing Power Usage and Monitoring Power Consumption
Monitoring Active System Faults
Managing Virtual Keyswitch Settings
Configuring the Host for Using Remote Console With OpenBoot
Configuring the Host for Using Remote Console With Solaris OS
Sensors on the Sun Netra T6340 Server Module
Indicators on the Sun Netra T6340 Server Module
Limits to Backward Compatibility
Create an ALOM CMT Compatibility Shell
Switch Between the ALOM CMT Shell and the Host Console
Return to the ILOM From the ILOM CMT Shell
Comparing ILOM and ALOM CMT Commands
Event Messages Available Through the ALOM Compatibility Shell
Service Processor Usage Event Messages
Environmental Monitoring Event Messages
The firmware on the service processor (known in ALOM CMT as the SC or system controller) sends event messages to several destinations:
Messages are sent to all logged-in users, based on the configuration of the sc_clieventlevelvariable.
Messages are recorded in the event log. View logged messages using the ALOM compatibility shell showlogs command.
Messages recorded in the event log can be identified according to the severity of the event. If the severity of the event is major or critical, you can view the messages for those events using the ALOM compatibility shell showlogs –p r command. View all messages in the event log using the ALOM compatibility shell showlogs –p p command.
Messages are sent in email messages based on the configuration of the mgt_mailalert variable. Individual email addresses can be configured to receive messages of different severities.
If the event represents a fault, the event message appears in the output of the ALOM compatibility shell showfaults command.
Messages are sent to the managed system operating system for logging into the Solaris syslog facility based on the configuration of the sys_eventlevel variable. Not all versions of the Solaris Operating System support this capability.