Exit Print View | |
Sun Integrated Lights Out Manager (ILOM) 3.0 Supplement for the Sun Netra T6340 Server Module |
![]() |
Documentation, Support, and Training
Understanding ILOM for the Sun Netra T6340 Server Module
Chassis Monitoring Module Features
Resetting the Password to the Factory Default
Viewing and Configuring Host Control Information
Managing Host Diagnostics and POST
Managing System User Interactions
Managing the Service Processor
Changing Service Processor Settings to Factory Defaults
Change Console Escape Characters (CLI)
Changing Configuration Policy Settings
Managing Power Usage and Monitoring Power Consumption
Monitoring Active System Faults
Managing Virtual Keyswitch Settings
Configuring the Host for Using Remote Console With OpenBoot
Configuring the Host for Using Remote Console With Solaris OS
Sensors on the Sun Netra T6340 Server Module
Indicators on the Sun Netra T6340 Server Module
Limits to Backward Compatibility
Adding a Commit Step to Procedures That Configure ILOM Network Configuration Properties
Commit a Change to a Network Configuration Property
Commit a Change to a Serial Port Configuration Property
Switch Between the ALOM CMT Shell and the Host Console
Return to the ILOM From the ILOM CMT Shell
Comparing ILOM and ALOM CMT Commands
Event Messages Available Through the ALOM Compatibility Shell
Service Processor Usage Event Messages
Environmental Monitoring Event Messages
Your server is configured to operate under an ILOM shell, by default. You can create an ALOM compatibility shell if you prefer to use commands that resemble ALOM CMT commands to administer your server.
Note - If you upgraded the firmware from an earlier version and selected the option to preserve the settings of your earlier version of ILOM, you can continue to use your prior settings (including the username admin and password) without recreating the admin username, as described in this task. If you use the original password for the username root supplied with ILOM firmware, ILOM warns you that the password is still set to the factory default.
Log onto the service processor with a username that has been assigned the user management (u) role.
When powered on, the SP boots to the ILOM login prompt.
XXXXXXXXXXXXXXXXXX login: username Password: Waiting for daemons to initialize... Daemons ready Integrated Lights Out Manager Version 3.0.x.x Copyright 2008 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. Warning: password is set to factory default. ->
Create a user named admin, and set the admin account roles to aucro and the CLI mode to alom.
-> create /SP/users/admin Creating user... Enter new password: ******** Enter new password again: ******** Created /SP/users/admin -> set /SP/users/admin role=aucro Set 'role' to 'aucro' ->set /SP/users/admin cli_mode=alom Set 'cli_mode' to 'alom'
Note - The asterisks in the example will not appear when you enter your password.
You can combine the create and set commands on a single line:
-> create /SP/users/admin role=aucro cli_mode=alom Creating user... Enter new password: ******** Enter new password again: ******** Created /SP/users/admin
Log out of the root account after you have finished creating the admin account.
-> exit
Log in to the ALOM CLI shell (indicated by the sc> prompt) from the ILOM login prompt.
XXXXXXXXXXXXXXXXX login: admin Password: Waiting for daemons to initialize... Daemons ready Integrated Lights Out Manager Version 3.0.x.x Copyright 2008 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. sc>
In the ALOM CMT compatibility shell (with a few exceptions) you can use commands that resemble the commands of ALOM CMT. The ALOM CMT compatibility shell is an ILOM interface. The comparisons between the ILOM CLI and the ALOM CMT compatibility CLI are described in Comparing ILOM and ALOM CMT Commands.