Figures

FIGURE 1-1 Sun StorEdge 6130 Array Product Overview

FIGURE 1-2 Controller Tray (Front View)

FIGURE 1-3 Controller Tray Ports and Switches (Back View)

FIGURE 1-4 Controller Tray LEDs (Back View)

FIGURE 1-5 SATA Expansion Tray (Front and Back Views))

FIGURE 1-6 FC Expansion Tray (Front and Back Views)

FIGURE 2-1 Loosening the Rail Screws to Adjust the Rail Length

FIGURE 2-2 Removing the Rail Extension for the Sun Fire Cabinet

FIGURE 2-3 Inserting Mounting Hole Screws and Positioning the Rack Alignment Template

FIGURE 2-4 Hanging the Left Rail

FIGURE 2-5 Securing the Left Rail to the Front of the Cabinet

FIGURE 2-6 Inserting Screws in the Lower Side Mounting Holes of the Cabinet

FIGURE 2-7 Loosening the Rail Screws to Adjust the Rail Length

FIGURE 2-8 Positioning the Rack Alignment Template

FIGURE 2-9 Securing the Left Rail to the Front of the Cabinet

FIGURE 2-10 Adjusting the Length of the Left Rail at the Back of the Cabinet

FIGURE 2-11 Securing the Right Rail to the Back of the Cabinet

FIGURE 2-12 Tightening the Adjusting Screws

FIGURE 2-13 Removing the End Caps on the Array

FIGURE 2-14 Positioning the Tray in the Cabinet

FIGURE 2-15 Sliding the Array Into the Cabinet

FIGURE 2-16 Securing the Array to the Front of a Sun StorEdge Expansion or Sun Fire Cabinet

FIGURE 2-17 Securing the Array to the Front of a Sun Rack 900/1000 Cabinet

FIGURE 2-18 Securing the Array to the Back of the Cabinet

FIGURE 2-19 Inserting Screws in the Front and Back Mounting Holes

FIGURE 2-20 Seating the Mounting Rails Over the Front and Back Screws

FIGURE 2-21 Inserting Screws in the Lower Mounting Holes

FIGURE 2-22 Tightening the Screws of the Left and Right Rails

FIGURE 2-23 Inserting Screws in the Front and Back Mounting Holes

FIGURE 2-24 Installing the Mounting Rail on the Front and Back Posts

FIGURE 2-25 Tightening the Screws of the Left and Right Rails

FIGURE 2-26 Removing the End Caps on the Tray

FIGURE 2-27 Positioning the Tray in the Rack

FIGURE 2-28 Sliding the Tray Into the Rack

FIGURE 2-29 Securing the Tray to the Front of the Rack

FIGURE 2-30 Securing the Tray to the Back of the Rack

FIGURE 2-31 Removing the End Caps on the Tray

FIGURE 2-32 Positioning the Tray in the Rack

FIGURE 2-33 Sliding the Tray Into the Rack

FIGURE 2-34 Securing the Tray to the Front of the Rack

FIGURE 2-35 Securing the Tray to the Back of the Rack

FIGURE 2-36 Tray ID Switch

FIGURE 2-37 Expansion and Controller Tray Ports

FIGURE 2-38 1x2 Array Configuration Cable Interconnection

FIGURE 2-39 1x3 Array Configuration Cable Interconnection

FIGURE 2-40 1x4 Array Configuration Cable Interconnection Cabling

FIGURE 2-41 1x8 Array Configuration Cable Interconnection

FIGURE 3-1 Tray Power Connectors and Switches

FIGURE 3-2 2 Gb Link Rate LED

FIGURE 3-3 Accessing the Link Rate Switch

FIGURE 4-1 Ethernet Ports for Controller A and Controller B

FIGURE 4-2 Host Connections

FIGURE 4-3 Connecting Data Hosts via a Switch

FIGURE 4-4 Connecting Data Hosts via a Switch with Cross-Connections

FIGURE 4-5 Direct Connection to a Single Host With Dual HBAs

FIGURE 4-6 Direct Connection to Dual Hosts With Dual HBAs

FIGURE 6-1 Access Buttons

FIGURE 6-2 Quick Status Displays

FIGURE 6-3 Navigational Tabs: Sun StorEdge 6130 Configuration Service

FIGURE 6-4 Navigational Tabs: Sun Storage Automated Diagnostic Environment

FIGURE 6-5 Page Content and Actions

FIGURE 6-6 Help Button

FIGURE 9-1 Logical and Physical Storage Components

FIGURE 9-2 Storage Array With Three Domains