| Skip Navigation Links | |
| Exit Print View | |
|
Sun ILOM 3.0 Supplement for the Sun Fire X4640 Server Sun Fire X4640 Server Documentation Library |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Sun ILOM 3.0 Supplement for the Sun Fire X4640 Server Sun Fire X4640 Server Documentation Library |
About This Documentation (PDF and HTML)
Overview of the ILOM Supplement
Communicating With the ILOM and the System Console
How to Get the SP IP Address Using the BIOS Setup Utility
How to Get the SP IP Address By Using a Serial Connection and the CLI
How to Connect to the Command-Line Interface Using SSH
How to Connect to the ILOM Command-Line Interface Through the Serial Management Port
How to Connect to the ILOM Web Interface
Connecting to the System Console
How to Connect to the Server Locally (Physical Console)
How to Connect Remotely Using the ILOM Web Interface
How to Connect to the Serial Console Using the ILOM Command-Line Interface
Determining Current Firmware Versions
Preparing for the Firmware Update
Updating the ILOM and System BIOS
Updating the Embedded HBA BIOS
The ILOM SP is assigned a DHCP IP address by default.
There are two requirements for DHCP IP address assignment to occur:
Connection to your network must be through a NET MGT port.
DHCP services must be present on your network infrastructure.
If a DHCP server cannot be reached after three DHCP requests, the ILOM SP is assigned a static IP address based on the network management port MAC address. This IP address is always in the format 192.168.xxx.xxx, where xxx.xxx is the remainder of the IP address.
You can choose from one of several ILOM SP interfaces to support system management on your server.
You can access SP firmware applications through the following ILOM SP interfaces:
Serial port command-line interface (CLI) (local access)
Secure shell (SSH) CLI (remote access over the network)
Web browser user interface (remote access over the network)
|