Understanding L2 and L3 Implementations
L2 and L3 Configuration Task Overview
L2 Based Configuration Example Using PVRST Protocol
L2 PVRST Configuration Task Overview
Configuring a Basic L2 PVRST Based Topology
Configure Switch ToR72p-1 for L2 PVRST
Configure Switch ToR72p-2 for L2 PVRST
Configure Switch ES1-24p-1 for L2 PVRST
Configure Switch ES1-24p-2 for L2 PVRST
Verify the L2 PVRST Configuration
Configuring an L2 PVRST Based Topology With Active/Standby Bond on the Servers
Prepare Switch ToR72p-1 for L2 PVRST Active/Standby on the Servers
Prepare Switch ToR72p-2 for L2 PVRST Active/Standby on the Servers
Configure Switch ES1-24p-1 for L2 PVRST Active/Standby on the Servers
Configure Switch ES1-24p-2 for L2 PVRST Active/Standby on the Servers
Verify the L2 PVRST Active/Standby Configuration on the Servers
Configuring an L2 PVRST and LLA Based Topology With Active/Active Bond on the Servers
Configure Switch ES1-24p-1 for L2 PVRST LLA Active/Active on the Servers
Configure Switch ES1-24p-2 for L2 PVRST LLA Active/Active on the Servers
Configure Switch ToR72p-1 for L2 PVRST LLA Active/Active on the Servers
Configure Switch ToR72p-2 for L2 PVRST LLA Active/Active on the Servers
Verify the L2 PVRST LLA Active/Active Configuration on the Servers
L3 RIP and OSPF Configuration Overview
L3 RIP and OSPF Configuration Task Overview
Configuring L3 Routing Based Topology Using RIP
Configure Switch TOR72p-1 for L3 Routing Using RIP
Configure Switch TOR72p-2 for L3 Routing Using RIP
Configure Switch ES1-24p-1 for L3 Routing Using RIP
Configure Switch ES1-24p-2 for L3 Routing Using RIP
Verify the L3 RIP Configuration
Configuring L3 Routing Based Topology Using OSPF
Configure Switch TOR72p-1 for L3 Routing Using OSPF
Configure Switch TOR72p-2 for L3 Routing Using OSPF
Configure Switch ES1-24p-1 for L3 Routing Using OSPF
Configure Switch ES1-24p-2 for L3 Routing Using OSPF
Sun Blade 6000 Ethernet Switched NEM 24p 10GbE is a multipurpose connectivity module for the Sun Blade 6000 modular system. The NEM supports connection to external devices through 10GbE SFP+ ports and QSFP ports. The NEM connects server modules (blades) in a Sun Blade 6000 modular system chassis with disk modules in the same chassis.
For installation, configuration, and management information, refer to the documentation at: http://www.oracle.com/goto/SB6K-24p-10GbE/docs
For the following configurations, refer to the Sun Blade 6000 Ethernet Switched NEM 24p 10GbE Software Configuration Guide at: http://www.oracle.com/goto/SB6K-24p-10GbE/docs
Switching Feature
VLAN Forwarding
RSTP
LA
Routing Feature
Static Unicast Route Entries
Dynamic Routing with RIP
Dynamic Routing with OSPF
Topology – SFP+ LAG and Backplane Portface Connection
Topology – Layer 2 Switch LAG and QSFP Splitter SAN Connection
Topology – Switched NEM High Availability Connection
Four NEM/Two Chassis High Availibility
Topology – Four Switched NEMs, High Availability Connection
Four NEM/Four Chassis High Availibility
QSFP Ports Into a Link Aggregation