Sun Blade 6000 Ethernet Switched NEM 24p 10GbE
Understanding L2 and L3 Implementations
L2 and L3 Configuration Task Overview
L2 Based Configuration Example Using PVRST Protocol
L2 PVRST Configuration Task Overview
Configuring a Basic L2 PVRST Based Topology
Configure Switch ToR72p-1 for L2 PVRST
Configure Switch ToR72p-2 for L2 PVRST
Configure Switch ES1-24p-1 for L2 PVRST
Configure Switch ES1-24p-2 for L2 PVRST
Verify the L2 PVRST Configuration
Configuring an L2 PVRST Based Topology With Active/Standby Bond on the Servers
Prepare Switch ToR72p-1 for L2 PVRST Active/Standby on the Servers
Prepare Switch ToR72p-2 for L2 PVRST Active/Standby on the Servers
Configure Switch ES1-24p-1 for L2 PVRST Active/Standby on the Servers
Configure Switch ES1-24p-2 for L2 PVRST Active/Standby on the Servers
Verify the L2 PVRST Active/Standby Configuration on the Servers
Configuring an L2 PVRST and LLA Based Topology With Active/Active Bond on the Servers
Configure Switch ES1-24p-1 for L2 PVRST LLA Active/Active on the Servers
Configure Switch ES1-24p-2 for L2 PVRST LLA Active/Active on the Servers
Configure Switch ToR72p-2 for L2 PVRST LLA Active/Active on the Servers
Verify the L2 PVRST LLA Active/Active Configuration on the Servers
L3 RIP and OSPF Configuration Overview
L3 RIP and OSPF Configuration Task Overview
Configuring L3 Routing Based Topology Using RIP
Configure Switch TOR72p-1 for L3 Routing Using RIP
Configure Switch TOR72p-2 for L3 Routing Using RIP
Configure Switch ES1-24p-1 for L3 Routing Using RIP
Configure Switch ES1-24p-2 for L3 Routing Using RIP
Verify the L3 RIP Configuration
Configuring L3 Routing Based Topology Using OSPF
Configure Switch TOR72p-1 for L3 Routing Using OSPF
Configure Switch TOR72p-2 for L3 Routing Using OSPF
Configure Switch ES1-24p-1 for L3 Routing Using OSPF
Configure Switch ES1-24p-2 for L3 Routing Using OSPF
ToR72p-1 SEFOS# configure terminal ToR72p-1 SEFOS(config)# set gvrp disable ToR72p-1 SEFOS(config)# set gmrp disable ToR72p-1 SEFOS(config)# set port-channel enable ToR72p-1 SEFOS(config)# interface vlan 1 ToR72p-1 SEFOS(config-if)# shutdown ToR72p-1 SEFOS(config-if)# no ip address ToR72p-1 SEFOS(config-if)# exit ToR72p-1 SEFOS(config)# interface range extreme-ethernet 0/1-72 ToR72p-1 SEFOS(config-if-range)# shutdown ToR72p-1 SEFOS(config-if-range)# end
See L2 and L3 Topology.
ToR72p-1 SEFOS# configure terminal ToR72p-1 SEFOS(config)# interface port-channel 10 ToR72p-1 SEFOS(config-if)# no shutdown ToR72p-1 SEFOS(config-if)# exit ToR72p-1 SEFOS(config)# interface port-channel 131 ToR72p-1 SEFOS(config-if)# no shutdown ToR72p-1 SEFOS(config-if)# exit ToR72p-1 SEFOS(config)# interface port-channel 133 ToR72p-1 SEFOS(config-if)# no shutdown ToR72p-1 SEFOS(config-if)# exit ToR72p-1 SEFOS(config)# end
You must add at least one port to the VLAN before you can assign the VLAN a name.
ToR72p-1 SEFOS# configure terminal ToR72p-1 SEFOS(config)# vlan 300 ToR72p-1 SEFOS(config-vlan)# ports add extreme-ethernet 0/66 name external-vlan-1 ToR72p-1 SEFOS(config-vlan)# vlan active ToR72p-1 SEFOS(config-vlan)# exit ToR72p-1 SEFOS(config)# vlan 301 ToR72p-1 SEFOS(config-vlan)# ports add extreme-ethernet 0/66 name external-vlan-2 ToR72p-1 SEFOS(config-vlan)# vlan active ToR72p-1 SEFOS(config-vlan)# exit ToR72p-1 SEFOS(config)# vlan 302 ToR72p-1 SEFOS(config-vlan)# ports add extreme-ethernet 0/66 name external-vlan-3 ToR72p-1 SEFOS(config-vlan)# vlan active ToR72p-1 SEFOS(config-vlan)# exit ToR72p-1 SEFOS(config)# vlan 303 ToR72p-1 SEFOS(config-vlan)# ports add extreme-ethernet 0/66 name external-vlan-4 ToR72p-1 SEFOS(config-vlan)# vlan active ToR72p-1 SEFOS(config-vlan)# exit ToR72p-1 SEFOS(config)# vlan 200 ToR72p-1 SEFOS(config-vlan)# ports add extreme-ethernet 0/66 name internal-vlan-1 ToR72p-1 SEFOS(config-vlan)# vlan active ToR72p-1 SEFOS(config-vlan)# exit ToR72p-1 SEFOS(config)# vlan 201 ToR72p-1 SEFOS(config-vlan)# ports add extreme-ethernet 0/66 name internal-vlan-2 ToR72p-1 SEFOS(config-vlan)# vlan active ToR72p-1 SEFOS(config-vlan)# exit ToR72p-1 SEFOS(config)# vlan 202 ToR72p-1 SEFOS(config-vlan)# ports add extreme-ethernet 0/66 name internal-vlan-3 ToR72p-1 SEFOS(config-vlan)# vlan active ToR72p-1 SEFOS(config-vlan)# exit ToR72p-1 SEFOS(config)# vlan 203 ToR72p-1 SEFOS(config-vlan)# ports add extreme-ethernet 0/66 name internal-vlan-4 ToR72p-1 SEFOS(config-vlan)# vlan active ToR72p-1 SEFOS(config-vlan)# exit ToR72p-1 SEFOS(config)# end
ToR72p-1 SEFOS# configure terminal ToR72p-1 SEFOS(config)# interface port-channel 10 ToR72p-1 SEFOS(config-if)# switchport mode trunk ToR72p-1 SEFOS(config-if)# exit ToR72p-1 SEFOS(config)# interface port-channel 131 ToR72p-1 SEFOS(config-if)# switchport mode trunk ToR72p-1 SEFOS(config-if)# exit ToR72p-1 SEFOS(config)# interface port-channel 133 ToR72p-1 SEFOS(config-if)# switchport mode trunk ToR72p-1 SEFOS(config-if)# exit ToR72p-1 SEFOS(config)# end
Configure the host port to allow all VLANs
ToR72p-1 SEFOS# configure terminal ToR72p-1 SEFOS(config)# interface extreme-ethernet 0/66 ToR72p-1 SEFOS(config-if)# description "connected to nxge1 Host-2" ToR72p-1 SEFOS(config-if)# switchport mode trunk ToR72p-1 SEFOS(config-if)# no shutdown ToR72p-1 SEFOS(config-if)# exit ToR72p-1 SEFOS(config)# interface extreme-ethernet 0/67 ToR72p-1 SEFOS(config-if)# description "connected to ES1-24p-1 on port23" ToR72p-1 SEFOS(config-if)# channel-group 131 mode active ToR72p-1 SEFOS(config-if)# no shutdown ToR72p-1 SEFOS(config-if)# exit ToR72p-1 SEFOS(config)# interface extreme-ethernet 0/71 ToR72p-1 SEFOS(config-if)# description "connected to ES1-24p-1 on port21" ToR72p-1 SEFOS(config-if)# channel-group 131 mode active ToR72p-1 SEFOS(config-if)# no shutdown ToR72p-1 SEFOS(config-if)# exit ToR72p-1 SEFOS(config)# interface extreme-ethernet 0/68 ToR72p-1 SEFOS(config-if)# description "connected to ES1-24p-2 on port23" ToR72p-1 SEFOS(config-if)# channel-group 133 mode active ToR72p-1 SEFOS(config-if)# no shutdown ToR72p-1 SEFOS(config-if)# exit ToR72p-1 SEFOS(config)# interface extreme-ethernet 0/72 ToR72p-1 SEFOS(config-if)# description "connected to ES1-24p-2 on port21" ToR72p-1 SEFOS(config-if)# channel-group 14 mode active ToR72p-1 SEFOS(config-if)# no shutdown ToR72p-1 SEFOS(config-if)# exit
ToR72p-1 SEFOS(config)# interface extreme-ethernet 0/69 ToR72p-1 SEFOS(config-if)# description "connected to Core switch on g1/1" ToR72p-1 SEFOS(config-if)# speed 1000 ToR72p-1 SEFOS(config-if)# channel-group 10 mode active ToR72p-1 SEFOS(config-if)# no shutdown ToR72p-1 SEFOS(config-if)# exit ToR72p-1 SEFOS(config)# interface extreme-ethernet 0/70 ToR72p-1 SEFOS(config-if)# description "connected to Core switch on g1/4" ToR72p-1 SEFOS(config-if)# speed 1000 ToR72p-1 SEFOS(config-if)# channel-group 10 mode active ToR72p-1 SEFOS(config-if)# no shutdown ToR72p-1 SEFOS(config-if)# exit ToR72p-1 SEFOS(config)# end
ToR72p-1 SEFOS# configure terminal ToR72p-1 SEFOS(config)# spanning-tree mode pvrst Spanning Tree enabled protocol is MSTP, now MSTP is being shutdown PVRST is started. PVRST Module status is changed ToR72p-1 SEFOS(config)# spanning-tree vlan 200 brg-priority 8192 ToR72p-1 SEFOS(config)# spanning-tree vlan 201 brg-priority 8192 ToR72p-1 SEFOS(config)# spanning-tree vlan 202 brg-priority 8192 ToR72p-1 SEFOS(config)# spanning-tree vlan 203 brg-priority 8192 ToR72p-1 SEFOS(config)# spanning-tree vlan 300 brg-priority 40960 ToR72p-1 SEFOS(config)# spanning-tree vlan 301 brg-priority 40960 ToR72p-1 SEFOS(config)# spanning-tree vlan 302 brg-priority 40960 ToR72p-1 SEFOS(config)# spanning-tree vlan 303 brg-priority 40960 ToR72p-1 SEFOS(config)# spanning-tree vlan 1 brg-priority 40960 ToR72p-1 SEFOS(config)# end ToR72p-1 SEFOS(config)# interface port-channel 12 ToR72p-1 SEFOS(config-if)# spanning-tree vlan 200 cost 1000 ToR72p-1 SEFOS(config-if)# spanning-tree vlan 201 cost 1000 ToR72p-1 SEFOS(config-if)# spanning-tree vlan 202 cost 1000 ToR72p-1 SEFOS(config-if)# spanning-tree vlan 203 cost 1000 ToR72p-1 SEFOS(config-if)# spanning-tree vlan 300 cost 1000 ToR72p-1 SEFOS(config-if)# spanning-tree vlan 301 cost 1000 ToR72p-1 SEFOS(config-if)# spanning-tree vlan 302 cost 1000 ToR72p-1 SEFOS(config-if)# spanning-tree vlan 303 cost 1000 ToR72p-1 SEFOS(config-if)# spanning-tree vlan 1 cost 1000 ToR72p-1 SEFOS(config-if)# exit ToR72p-1 SEFOS(config)# interface port-channel 14 ToR72p-1 SEFOS(config-if)# spanning-tree vlan 200 cost 3000 ToR72p-1 SEFOS(config-if)# spanning-tree vlan 201 cost 3000 ToR72p-1 SEFOS(config-if)# spanning-tree vlan 202 cost 3000 ToR72p-1 SEFOS(config-if)# spanning-tree vlan 203 cost 3000 ToR72p-1 SEFOS(config-if)# spanning-tree vlan 300 cost 3000 ToR72p-1 SEFOS(config-if)# spanning-tree vlan 301 cost 3000 ToR72p-1 SEFOS(config-if)# spanning-tree vlan 302 cost 3000 ToR72p-1 SEFOS(config-if)# spanning-tree vlan 303 cost 3000 ToR72p-1 SEFOS(config-if)# spanning-tree vlan 1 cost 3000 ToR72p-1 SEFOS(config-if)# end
ToR72p-1 SEFOS# copy run start Building configuration ... [OK] ToR72p-1 SEFOS#
ToR72p-1 SEFOS# show interface description Interface Status Protocol Description --------- ------ -------- ----------- Ex0/1 down down Ex0/2 down down Ex0/3 down down ... Ex0/63 down down Ex0/64 down down Ex0/65 down down Ex0/66 up up connected to nxge1 Host-2 Ex0/67 up up connected to ES1-24p-1 on port23 Ex0/68 up up connected to ES1-24p-2 on port23 Ex0/69 up up connected to Core switch on g1/1 Ex0/70 up up connected to Core switch on g1/4 Ex0/71 up up connected to ES1-24p-1 on port21 Ex0/72 up up connected to ES1-24p-2 on port21 po10 up up po131 up up po133 up up vlan1 down down
ToR72p-1 SEFOS# show spanning-tree Spanning-tree for VLAN 200 We are the root of the Spanning Tree Root Id Priority 8392 Address 00:21:28:77:d2:1d Cost 0 Port 0 Hello Time 2 Sec, Max Age 20 Sec, Forward Delay 15 Sec Spanning Tree Enabled Protocol PVRST Bridge Id Priority 8392 Address 00:21:28:77:d2:1d Hello Time 2 sec, Max Age 20 sec, Forward Delay 15 sec Dynamic Path Cost is Disabled Dynamic Path Cost Lag-Speed Change is Disabled Name Role State Cost Prio Type ---- ---- ----- ---- ---- ------ Ex0/66 Designated Forwarding 2000 128 P2P po10 Designated Forwarding 19900 128 P2P po131 Designated Forwarding 100 128 P2P po133 Designated Forwarding 1900 128 P2P ... Spanning-tree for VLAN 302 Root Id Priority 4096 Address 00:17:df:18:9d:2e Cost 19900 Port po10 Hello Time 2 Sec, Max Age 20 Sec, Forward Delay 15 Sec Spanning Tree Enabled Protocol PVRST Bridge Id Priority 8494 Address 00:21:28:77:d2:1d Hello Time 2 sec, Max Age 20 sec, Forward Delay 15 sec Dynamic Path Cost is Disabled Dynamic Path Cost Lag-Speed Change is Disabled Name Role State Cost Prio Type ---- ---- ----- ---- ---- ------ Ex0/66 Designated Forwarding 2000 128 P2P po10 Root Forwarding 19900 128 P2P po131 Designated Forwarding 1900 128 P2P po133 Designated Forwarding 1900 128 P2P