Sun Blade 6000 Ethernet Switched NEM 24p 10GbE
Understanding L2 and L3 Implementations
L2 and L3 Configuration Task Overview
L2 Based Configuration Example Using PVRST Protocol
L2 PVRST Configuration Task Overview
Configuring a Basic L2 PVRST Based Topology
Configure Switch ToR72p-1 for L2 PVRST
Configure Switch ToR72p-2 for L2 PVRST
Configure Switch ES1-24p-1 for L2 PVRST
Configure Switch ES1-24p-2 for L2 PVRST
Verify the L2 PVRST Configuration
Configuring an L2 PVRST Based Topology With Active/Standby Bond on the Servers
Prepare Switch ToR72p-1 for L2 PVRST Active/Standby on the Servers
Prepare Switch ToR72p-2 for L2 PVRST Active/Standby on the Servers
Configure Switch ES1-24p-1 for L2 PVRST Active/Standby on the Servers
Configure Switch ES1-24p-2 for L2 PVRST Active/Standby on the Servers
Verify the L2 PVRST Active/Standby Configuration on the Servers
Configuring an L2 PVRST and LLA Based Topology With Active/Active Bond on the Servers
Configure Switch ES1-24p-1 for L2 PVRST LLA Active/Active on the Servers
Configure Switch ES1-24p-2 for L2 PVRST LLA Active/Active on the Servers
Configure Switch ToR72p-1 for L2 PVRST LLA Active/Active on the Servers
Configure Switch ToR72p-2 for L2 PVRST LLA Active/Active on the Servers
Verify the L2 PVRST LLA Active/Active Configuration on the Servers
L3 RIP and OSPF Configuration Overview
L3 RIP and OSPF Configuration Task Overview
Configuring L3 Routing Based Topology Using RIP
Configure Switch TOR72p-1 for L3 Routing Using RIP
Configure Switch TOR72p-2 for L3 Routing Using RIP
Configure Switch ES1-24p-1 for L3 Routing Using RIP
Configure Switch ES1-24p-2 for L3 Routing Using RIP
Verify the L3 RIP Configuration
Configuring L3 Routing Based Topology Using OSPF
Configure Switch TOR72p-1 for L3 Routing Using OSPF
Configure Switch TOR72p-2 for L3 Routing Using OSPF
Configure Switch ES1-24p-2 for L3 Routing Using OSPF
Tip - It is a best practice to start the configuration with all the ports and default VLAN shutdown. Also, disable GVRP and GMRP because dynamic VLAN learning is not suggested.
ES1-24p-1 SEFOS# configure terminal ES1-24p-1 SEFOS(config)# set gvrp disable ES1-24p-1 SEFOS(config)# set gmrp disable ES1-24p-1 SEFOS(config)# set port-channel enable ES1-24p-1 SEFOS(config)# interface vlan 1 ES1-24p-1 SEFOS(config-if)# shutdown ES1-24p-1 SEFOS(config-if)# no ip address ES1-24p-1 SEFOS(config-if)# exit ES1-24p-1 SEFOS(config)# interface range extreme-ethernet 0/1-24 ES1-24p-1 SEFOS(config-if-range)# shutdown ES1-24p-1 SEFOS(config-if-range)# end
See L2 and L3 Topology.
ES1-24p-1 SEFOS# configure terminal ES1-24p-1 SEFOS(config)# interface port-channel 12 ES1-24p-1 SEFOS(config-if)# no shutdown ES1-24p-1 SEFOS(config-if)# exit ES1-24p-1 SEFOS(config)# interface port-channel 13 ES1-24p-1 SEFOS(config-if)# no shutdown ES1-24p-1 SEFOS(config-if)# exit ES1-24p-1 SEFOS(config)# end
You must add at least one port to the VLAN before you can assign the VLAN a name.
ES1-24p-1 SEFOS# configure terminal ES1-24p-1 SEFOS(config)# vlan 2003 ES1-24p-1 SEFOS(config-vlan)# ports add port-channel 12 untagged port-channel 12 name 192_168_203_0_OSPF_P2P ES1-24p-1 SEFOS(config-vlan)# vlan active ES1-24p-1 SEFOS(config-vlan)# exit ES1-24p-1 SEFOS(config)# vlan 2004 ES1-24p-1 SEFOS(config-vlan)# ports add port-channel 13 untagged port-channel 13 name 192_168_204_0_OSPF_P2P ES1-24p-1 SEFOS(config-vlan)# vlan active ES1-24p-1 SEFOS(config-vlan)# exit ES1-24p-1 SEFOS(config)# vlan 50 ES1-24p-1 SEFOS(config-vlan)# ports add extreme-ethernet 0/1 untagged extreme-ethernet 0/1 name 192_168_50_0_HOST_P2P ES1-24p-1 SEFOS(config-vlan)# vlan active ES1-24p-1 SEFOS(config-vlan)# exit ES1-24p-1 SEFOS(config)# vlan 100 ES1-24p-1 SEFOS(config-vlan)# ports add extreme-ethernet 0/1 name access-layer-vlan-1 ES1-24p-1 SEFOS(config-vlan)# vlan active ES1-24p-1 SEFOS(config-vlan)# exit ES1-24p-1 SEFOS(config)# vlan 101 ES1-24p-1 SEFOS(config-vlan)# ports add extreme-ethernet 0/1 name access-layer-vlan-2 ES1-24p-1 SEFOS(config-vlan)# vlan active ES1-24p-1 SEFOS(config-vlan)# end
Also, disable spanning-tree on all uplinks.
ES1-24p-1 SEFOS# configure terminal ES1-24p-1 SEFOS(config)# interface port-channel 12 ES1-24p-1 SEFOS(config-if)# switchport pvid 2003 ES1-24p-1 SEFOS(config-if)# spanning-tree disable ES1-24p-1 SEFOS(config-if)# exit ES1-24p-1 SEFOS(config)# interface port-channel 13 ES1-24p-1 SEFOS(config-if)# switchport pvid 2004 ES1-24p-1 SEFOS(config-if)# spanning-tree disable ES1-24p-1 SEFOS(config-if)# exit ES1-24p-1 SEFOS(config)# end
Configure the host port as an access link with a different VLAN.
ES1-24p-1 SEFOS# configure terminal ES1-24p-1 SEFOS(config)# interface extreme-ethernet 0/1 ES1-24p-1 SEFOS(config-if)# description "connected to eth1 nsn172-178" ES1-24p-1 SEFOS(config-if)# switchport pvid 50 ES1-24p-1 SEFOS(config-if)# no shutdown ES1-24p-1 SEFOS(config-if)# exit ES1-24p-1 SEFOS(config)# interface extreme-ethernet 0/23 ES1-24p-1 SEFOS(config-if)# description "connected to ToR72p-1 on port67" ES1-24p-1 SEFOS(config-if)# channel-group 12 mode active ES1-24p-1 SEFOS(config-if)# no shutdown ES1-24p-1 SEFOS(config-if)# exit ES1-24p-1 SEFOS(config)# interface extreme-ethernet 0/21 ES1-24p-1 SEFOS(config-if)# description "connected to ToR72p-1 on port71" ES1-24p-1 SEFOS(config-if)# channel-group 12 mode active ES1-24p-1 SEFOS(config-if)# no shutdown ES1-24p-1 SEFOS(config-if)# exit ES1-24p-1 SEFOS(config)# interface extreme-ethernet 0/24 ES1-24p-1 SEFOS(config-if)# description "connected to ToR72p-2 on port68" ES1-24p-1 SEFOS(config-if)# channel-group 13 mode active ES1-24p-1 SEFOS(config-if)# no shutdown ES1-24p-1 SEFOS(config-if)# exit ES1-24p-1 SEFOS(config)# interface extreme-ethernet 0/22 ES1-24p-1 SEFOS(config-if)# description "connected to ToR72p-2 on port71" ES1-24p-1 SEFOS(config-if)# channel-group 13 mode active ES1-24p-1 SEFOS(config-if)# no shutdown ES1-24p-1 SEFOS(config-if)# exit ES1-24p-1 SEFOS(config)# end
ES1-24p-1 SEFOS# configure terminal ES1-24p-1 SEFOS(config)# interface vlan 2003 ES1-24p-1 SEFOS(config-if)# ip address 192.168.203.20 255.255.255.0 ES1-24p-1 SEFOS(config-if)# no shutdown ES1-24p-1 SEFOS(config-if)# exit ES1-24p-1 SEFOS(config)# interface vlan 2004 ES1-24p-1 SEFOS(config-if)# ip address 192.168.204.20 255.255.255.0 ES1-24p-1 SEFOS(config-if)# no shutdown ES1-24p-1 SEFOS(config-if)# exit ES1-24p-1 SEFOS(config)# interface vlan 50 ES1-24p-1 SEFOS(config-if)# ip address 192.168.50.10 255.255.255.0 ES1-24p-1 SEFOS(config-if)# no shutdown ES1-24p-1 SEFOS(config-if)# exit ES1-24p-1 SEFOS(config)# interface vlan 100 ES1-24p-1 SEFOS(config-if)# ip address 192.168.100.10 255.255.255.0 ES1-24p-1 SEFOS(config-if)# no shutdown ES1-24p-1 SEFOS(config-if)# exit ES1-24p-1 SEFOS(config)# interface vlan 101 ES1-24p-1 SEFOS(config-if)# ip address 192.168.101.10 255.255.255.0 ES1-24p-1 SEFOS(config-if)# no shutdown ES1-24p-1 SEFOS(config-if)# exit ES1-24p-1 SEFOS(config)# end
ES1-24p-1 SEFOS# configure terminal ES1-24p-1 SEFOS(config)# router ospf ES1-24p-1 SEFOS(config-router)# asbr router ES1-24p-1 SEFOS(config-router)# router-id 12.0.0.3 ES1-24p-1 SEFOS(config-router)# redistribute connected ES1-24p-1 SEFOS(config-router)# network 192.168.203.20 ES1-24p-1 SEFOS(config-router)# network 192.168.204.20 ES1-24p-1 SEFOS(config-router)# network 192.168.50.10 ES1-24p-1 SEFOS(config-router)# network 192.168.100.10 ES1-24p-1 SEFOS(config-router)# network 192.168.101.10 ES1-24p-1 SEFOS(config-router)# end
ES1-24p-1 SEFOS# configure terminal ES1-24p-1 SEFOS(config)# interface vlan 2003 ES1-24p-1 SEFOS(config-if)# ip ospf hello-interval 3 ES1-24p-1 SEFOS(config-if)# ip ospf dead-interval 12 ES1-24p-1 SEFOS(config-if)# ip ospf message-digest-key 1 md5 oracle ES1-24p-1 SEFOS(config-if)# ip ospf authentication message-digest ES1-24p-1 SEFOS(config-if)# ip ospf network point-to-point ES1-24p-1 SEFOS(config-if)# exit ES1-24p-1 SEFOS(config)# interface vlan 2004 ES1-24p-1 SEFOS(config-if)# ip ospf hello-interval 3 ES1-24p-1 SEFOS(config-if)# ip ospf dead-interval 12 ES1-24p-1 SEFOS(config-if)# ip ospf message-digest-key 1 md5 oracle ES1-24p-1 SEFOS(config-if)# ip ospf authentication message-digest ES1-24p-1 SEFOS(config-if)# ip ospf network point-to-point ES1-24p-1 SEFOS(config-if)# exit ES1-24p-1 SEFOS(config)# interface vlan 50 ES1-24p-1 SEFOS(config-if)# ip ospf hello-interval 3 ES1-24p-1 SEFOS(config-if)# ip ospf dead-interval 12 ES1-24p-1 SEFOS(config-if)# ip ospf message-digest-key 1 md5 oracle ES1-24p-1 SEFOS(config-if)# ip ospf authentication message-digest ES1-24p-1 SEFOS(config-if)# ip ospf network point-to-point ES1-24p-1 SEFOS(config-if)# exit ES1-24p-1 SEFOS(config)# interface vlan 100 ES1-24p-1 SEFOS(config-if)# ip ospf hello-interval 3 ES1-24p-1 SEFOS(config-if)# ip ospf dead-interval 12 ES1-24p-1 SEFOS(config-if)# ip ospf message-digest-key 1 md5 oracle ES1-24p-1 SEFOS(config-if)# ip ospf authentication message-digest ES1-24p-1 SEFOS(config-if)# ip ospf network point-to-point ES1-24p-1 SEFOS(config-if)# exit ES1-24p-1 SEFOS(config)# interface vlan 101 ES1-24p-1 SEFOS(config-if)# ip ospf hello-interval 3 ES1-24p-1 SEFOS(config-if)# ip ospf dead-interval 12 ES1-24p-1 SEFOS(config-if)# ip ospf message-digest-key 1 md5 oracle ES1-24p-1 SEFOS(config-if)# ip ospf authentication message-digest ES1-24p-1 SEFOS(config-if)# ip ospf network point-to-point ES1-24p-1 SEFOS(config-if)# end
ES1-24p-1 SEFOS# copy run start Building configuration ... [OK]
ES1-24p-1 SEFOS# show interface description Interface Status Protocol Description --------- ------ -------- ----------- Ex0/1 up up connected to eth1 nsn172-178 ... Ex0/19 down down Ex0/20 down down Ex0/21 up up connected to ToR72p-1 on port71 Ex0/22 up up connected to ToR72p-2 on port71 Ex0/23 up up connected to ToR72p-1 on port67 Ex0/24 up up connected to ToR72p-2 on port68 po12 up up po13 up up vlan1 down down vlan2003 up up vlan2004 up up vlan50 up up vlan100 up up vlan101 up up
ES1-24p-1 SEFOS# show ip ospf neighbor Vrf default Neighbor-ID Pri State DeadTime Address Interface ----------- --- ----- -------- ------- --------- 12.0.0.1 1 FULL/PTOP 35 192.168.203.10 vlan2003
Some switches display OSPF routes learned as 1000 because they have multiple paths to reach a particular destination.
ES1-24p-1 SEFOS# show ip route summary Route Source Routes connected 5 static 0 rip 0 bgp 0 ospf 1016 Total 1021
ES1-24p-1 SEFOS# show ip route Codes: C - connected, S - static, R - rip, B - bgp, O - ospf O 192.168.20.0/24 [3] via 192.168.203.10 [3] via 192.168.206.10 O 192.168.30.0/24 [2] via 192.168.203.10 O 192.168.40.0/24 [2] via 192.168.206.10 C 192.168.50.0/24 is directly connected, vlan50 O 192.168.60.0/24 [3] via 192.168.203.10 [3] via 192.168.206.10 C 192.168.100.0/24 is directly connected, vlan100 C 192.168.101.0/24 is directly connected, vlan101 O 192.168.150.0/24 [3] via 192.168.203.10 [3] via 192.168.206.10 O 192.168.151.0/24 [3] via 192.168.203.10 [3] via 192.168.206.10 O 192.168.201.0/24 [2] via 192.168.203.10 O 192.168.202.0/24 [2] via 192.168.206.10 C 192.168.203.0/24 is directly connected, vlan2003 C 192.168.204.0/24 is directly connected, vlan2004 O 192.168.205.0/24 [2] via 192.168.203.10 O 192.168.206.0/24 [2] via 192.168.206.10 O 45.45.45.0/24 [3] via 192.168.203.10 [3] via 192.168.206.10 O 45.45.46.0/24 [3] via 192.168.203.10 [3] via 192.168.206.10 O 45.45.47.0/24 [3] via 192.168.203.10 [3] via 192.168.206.10 O 45.45.48.0/24 [3] via 192.168.203.10 [3] via 192.168.206.10 O 45.45.49.0/24 [3] via 192.168.203.10 [3] via 192.168.206.10 O 45.45.50.0/24 [3] via 192.168.203.10 ...