About This Documentation (PDF and HTML)
Overview of the Sun Blade Storage Module M2
Installing the Storage Module Into the Chassis
Assigning and Managing Storage
Overview of the Sun Blade Storage Module M2 Product Notes
Supported Firmware, Hardware and Software
Solaris Operating System Issues
Performing Maintenance and Hot Plug Actions
Importing Existing Virtual Drives to a Replacement REM
Storage Module Sensors and Indicators
Introduction to the Sun Blade Storage Module M2
Maintaining the Sun Blade Storage Module M2
Diagnosing Storage Module Faults
Diagnosing Faults Using MegaRAID Storage Manager Software
Diagnosing Faults With SunVTS Software
The CMM ILOM provides a method for logging events and checking storage module status (sensors and indicators).
Note - The storage module (which does not have its own service processor) is managed by the CMM ILOM. In the web interface, you will not see a blade listed for the storage module in the chassis device tree in the left pane.
From a web browser, log in to the CMM ILOM and click the System Monitoring tab. Events can be filtered by type, date and severity.
When using the CMM ILOM CLI, log in to the CMM ILOM from a terminal and enter the command:
cd /CMM/logs/event
Example output might look like:
ID Date/Time Class Type Severity ----- ------------------------ -------- -------- -------- 578 Wed Jun 11 06:39:47 2008 Audit Log minor user1 : Open Session : object = /session/type : value = shell : success 577 Wed Jun 11 06:34:53 2008 Audit Log minor user1 : Set : object = /clients/activedirectory/userdomains/3/domain : value =joe.customer.example.sun.com : success 576 Wed Jun 10 11:22:31 2008 Fault Repair minor Component /CH/NEM0 repaired 575 Wed Jun 10 11:10:02 2008 Fault Repair minor Fault fault.chassis.device.fail on component /CH/NEM0 cleared
For more on using CMM ILOM to view events, sensor information, or to check on storage module component status using the Web interface or CLI, refer to the Sun Blade Storage Module M2 Administration Guide.