Sun Netra CP3260 Blade Server User’s Guide
820-0457-11
Contents |
1.4 Advanced Rear Transition Modules
1.6 System Requirements and Options
1.6.1 Hardware Requirements and Options
1.7 Technical Support and Warranty
1.7.1 Part Number, Serial Number, and Revision Number Identification
2.1 Equipment and Operator Safety
2.2 Materials and Tools Required
2.3 Preparing for the Installation
2.3.1 Checking Power, Thermal, Environmental, and Space Requirements
2.4 Installation Procedure Summary
2.5 Configuring On-Board Hardware
2.5.1 Adding or Replacing FB-DIMM Memory Modules
2.5.1.1 To Remove FB-DIMM Memory Modules
2.5.1.2 To Install FB-DIMM Memory Modules
2.5.2 Adding or Replacing Compact Flash Card
2.5.3 Adding or Replacing TOD Clock Battery
2.6 Installing an Advanced Rear Transition Module (Optional)
2.7 Installing the Netra CP3260 Blade Server
2.8 Connecting External I/O Cables
2.9 Hot-Swapping the Netra CP3260 Blade Server
3.1 Operating Systems and Patches
3.2 Configuring Payload OS NIU Driver for Multiplexing to Zones 2 and 3
3.3 Installing as a Diskless Clients
3.3.1 Creating a Boot Server for Diskless Clients
3.3.2 Adding a Diskless Client
3.3.3 Determining Local Network IP Addresses and Host Names
3.5 Configuring for 1-GbE or 10-GbE Switches
3.6 Downloading and Installing SunVTS Software
3.7 Formatting the Optional Compact Flash Card
4. Firmware and Blade Server Management
4.2 Power-On Self-Test Diagnostics
4.2.2 POST Diagnostic and Error Message Format
4.3.1 Getting to the ok Prompt
4.3.3.1 probe-scsi and probe-scsi-all Commands
4.3.3.4 Using watch-net and watch-net-all Commands to Check the Network
4.3.4 OpenBoot Configuration Variables
4.3.4.1 Viewing and Setting OpenBoot Configuration Variables
4.5.1 Enabling and Disabling Automatic System Recovery
4.5.1.1 To Enable Automatic System Recovery
4.5.1.2 To Disable Automatic System Recovery
4.7 Retrieving Device Information
4.8 Multiplexing to Zones 2 and 3
5. Hardware Functional Descriptions
5.1.1 UltraSPARC T2 Processor and Memory
5.1.3 Base and Fabric Interfaces
5.2.4.2 Ethernet Management Port
5.2.5.1 Ethernet Management Port
5.2.7 Service Processor MPC885
5.2.7.1 Field-Programmable Gate Array
5.2.8 Intelligent Platform Management Controller
5.2.8.1 Intelligent Platform Management Bus
5.2.8.7 System Monitor (ADM1026) and Thresholds
5.2.10 ATCA Power Module (-48V to 12V)
A.4.3 Midplane Power Connector (Zone 1)
A.4.4 Data Transport Connector (Zone 2)
A.4.5 Sun Netra ARTM Connectors (Zone 3)
A.4.6 TOD Clock Battery Holder
B.3 Solaris OS Graceful Shutdown Commands
Copyright © 2009 Sun Microsystems, Inc. All rights reserved.