Documentation, Support, and Training
Understanding Switch Specifications
Network Management Connector and Pins
USB Management Connector and Pins
Understanding InfiniBand Cabling
Floor and Underfloor Delivery of InfiniBand Cables
Overhead Delivery of InfiniBand Cables
Understanding the Installation
Install the Switch in the Rack
Accessing the Management Controller
Access the Management Controller From the Network Management Port
Access the Management Controller From the USB Management Port
Verifying the InfiniBand Fabric
Discover the InfiniBand Fabric Topology
Perform Diagnostics on the InfiniBand Fabric
Proper InfiniBand cable installation requires the following:
Plan the cable routes and cable length needs, identifying problematic cable route bends, minimizing the length of continuous vertical runs to no more than 2 meters (7 feet), and specifying hardware to support cable routing.
Carry the entire cable to the points of connection and unroll the cable from the first connection point to the second. Keep the coil closed and pause to enable the cable to relax as it is unrolled and moved through turns.
Ensure that cable route turns are larger than 85 mm (3.4 inches) radius for optical cables and 127 mm (5 inches) radius for copper cables. Find alternative routes for turns that are tighter.
Secure the cable to hard points and bundle it with soft, hook-and-loop fasteners.
Mediate the slack between securing points to maintain minimal cable tension and proper support.
See Floor and Underfloor Delivery of InfiniBand Cables and Overhead Delivery of InfiniBand Cables.
Label the ends of cables to identify their routes. Rest the cable connectors on a stable surface when they are not connected.