Exit Print View | |
Oracle Integrated Lights Out Manager (ILOM) 3.0 Supplement for Sun Blade T6320 Server Modules |
![]() |
Documentation, Support, and Training
Understanding ILOM for the Sun Blade T6320 Server Module
Chassis Monitoring Module Features
Resetting the Password to the Factory Default
Viewing and Configuring Host Control Information
Managing Host Diagnostics and POST
Managing System User Interactions
Managing the Service Processor
Changing Service Processor Setting to Factory Defaults
Change Console Escape Characters (CLI)
Changing Configuration Policy Settings
Managing Power Usage and Monitoring Power Consumption
View Power Management Properties (CLI)
Viewing Total Available Power (CLI)
Monitoring Permitted Power Consumption (CLI)
Using the Power Consumption Control Interfaces
Setting the Power Policy (CLI)
Viewing the Power Policy (CLI)
Viewing Power Management Properties (Web Interface)
Monitoring Active System Faults
Managing Virtual Keyswitch Settings
Sensors on the Sun Blade T6320 Server Module Server
Indicators on the Sun Blade T6320 Server Module
Limits to Backward Compatibility
Create an ALOM CMT Compatibility Shell
Switch Between the ALOM CMT Shell and the Host Console
Return to the ILOM From the ILOM CMT Shell
ILOM and ALOM CMT Command Comparison
Event Messages Available Through the ALOM Compatibility Shell
Service Processor Usage Event Messages
Environmental Monitoring Event Messages
The value of / SYS/VPS is equivalent to the value of the following command: show /SYS/powermgmt actual_power.
The /SP/powermgmt actual_power property is the same as /SYS/VPS in that /SYS/VPS is a sensor that has a threshold and actual_power is just the value returned by the sensor.
At the -> prompt, type the following command:
-> show /SYS/VPS
for example:
-> show /SP/VPS /SP/VPS Targets: Properties type = Power Unit class = Threshold Sensor value = 193.000 Watts upper_nonrecov_threshold = N/A upper_critical_threshold = N/A upper_noncritical_threshold = N/A lower_noncritical_threshold = N/A lower_critical_threshold = N/A upper_nonrecov_threshold = N/A alarm_status = cleared Commands cd show ->