| Exit Print View | |
Oracle Integrated Lights Out Manager (ILOM) 3.0 Supplement for Sun Blade T6320 Server Modules |
|
| Exit Print View | |
Oracle Integrated Lights Out Manager (ILOM) 3.0 Supplement for Sun Blade T6320 Server Modules |
|
Documentation, Support, and Training
Understanding ILOM for the Sun Blade T6320 Server Module
Chassis Monitoring Module Features
Resetting the Password to the Factory Default
Manage the Host Boot Mode LDoms Configuration (CLI)
Change the Host Boot Mode Behavior at Reset (CLI)
Display Host's Boot Mode Expiration Date (CLI)
View or Configure Boot Mode Settings (Web Interface)
Viewing and Configuring Host Control Information
Managing Host Diagnostics and POST
Managing System User Interactions
Managing the Service Processor
Changing Service Processor Setting to Factory Defaults
Change Console Escape Characters (CLI)
Changing Configuration Policy Settings
Managing Power Usage and Monitoring Power Consumption
Monitoring Active System Faults
Managing Virtual Keyswitch Settings
Sensors on the Sun Blade T6320 Server Module Server
Indicators on the Sun Blade T6320 Server Module
Limits to Backward Compatibility
Create an ALOM CMT Compatibility Shell
Switch Between the ALOM CMT Shell and the Host Console
Return to the ILOM From the ILOM CMT Shell
ILOM and ALOM CMT Command Comparison
Event Messages Available Through the ALOM Compatibility Shell
Service Processor Usage Event Messages
Environmental Monitoring Event Messages
At the -> prompt, type:
-> set /HOST/bootmode script=value
where script controls the host server OpenBoot PROM firmware method of booting. script does not affect the current /HOST/bootmode setting. value can be up to 64 bytes in length. You can specify a /HOST/bootmode setting and set the script within the same command.
For example:
-> set /HOST/bootmode state=reset_nvram script="setenv diag-switch? true"
After the server resets and OpenBoot PROM reads the values stored in the script, the OpenBoot PROM sets the OpenBoot PROM variable diag-switch? to the user-requested value of true.
Note - If you set /HOST/bootmode script="", ILOM sets the script to empty.
|
