How to Install the Mounting Brackets on the Server

Use this procedure to install the two mounting brackets onto the sides of the server.

1. Position a mounting bracket against the chassis so that the slide rail lock is at the server front, and the four keyed openings on the mounting bracket are aligned with the four locating pins on the side of the chassis.
   
2. With the heads of the four chassis locating pins protruding though the four keyed openings in the mounting bracket, push the mounting bracket toward the front of the chassis until the mounting-bracket clip locks into place with an audible click.
3. Verify that the rear locating pin has engaged the mounting-bracket clip.
4. Repeat the previous steps to install the remaining mounting bracket on the other side of the server.

Next Steps

How to Attach the Slide Rail Assemblies to the Rack